E+G Castors & Wheels

E+G Find your Wheel

Elesa+Ganter Choose wheel from the weight load, and materials.

E+G RE.FF Wheel

Elesa+Ganter RE.FF injection molded polyurethane wheels
Hardness: 55 Shore D.
Load: 1200-3000 N.

E+G RE.C6 Wheel

Elesa+Ganter RE.C6 injected polyurethan wheels for the general public.

Technical information:
Covering: Injected polyurethan, hardness 55 Shore D.

Wheel centre body: Polyamide-based technopolymer (PA). Resistant to solvents, oils and other chemicals.

Bore: Directly made into the centre.

Axle set: Calibrated zinc-plated steel precision tube. The tube serves as a spacer, is tightened to the bracket with screw and nut to a un
predetermined torque value. The wheel bore rotates onto the tube freely.

Fixed plate bracket: Electrolytically zinc-plated steel sheet bracket.

Turning plate bracket: Electrolytically zinc-plated steel sheet bracket.
The presence of two ball turns and the direct contact between the plate and the ball race ring with built-in pin ensure excellent
manoeuvrability and very limited clearance.

Front-actuated brake: Total brake that locks the wheel and bracket rotation. The optimised dimensions and the retractible pedal ensure minimal space occupied and maximum actuation ease.

Standard executions:
- PBL: fixed plate bracket, without brake.
- SBL: turning plate bracket, without brake.
- SBF: turning plate bracket, with brake.
- CBL: turning plate bracket and threaded centre pin, without brake.
- CBF: turning plate bracket and threaded centre pin, with brake.
- FBL: turning plate bracket with centre pass-thorugh hole, without brake.
- FBF: turning plate bracket and pass-through hole, with brake.

Applications: Wheels for the general public, excellent smoothness and elasticity features, high wear and tearing resistance.

E+G RE.C6-G Double Wheel

Elesa+Ganter RE.C6 Injected polyurethan twin wheels for the general public.

Technical information:
Covering: Injected polyurethan, hardness 55 Shore D.

Wheel centre body: Polyamide-based technopolymer (PA). Resistant to solvents, oils and other chemicals.

Bore: Directly made into the centre.

Axle set: Calibrated zinc-plated steel precision tube. The tube serves as a spacer, is tightened to the bracket with screw and nut to a un predetermined torque value. The wheel bore rotates onto the tube freely.

Fixed plate bracket: Electrolytically zinc-plated steel sheet bracket.

Turning plate bracket: Electrolytically zinc-plated steel sheet bracket.
The presence of two ball turns and the direct contact between the plate and the ball race ring with built-in pin ensure excellent manoeuvrability and very limited clearance.

Front-actuated brake: Total brake that locks the wheel and bracket rotation. The optimised dimensions and the retractible pedal ensure minimal space occupied and maximum actuation ease.

Standard executions:
- SBL-G: turning plate bracket, without brake.
- SBF-G: turning plate bracket, with brake.
- CBL-G: turning plate bracket and threaded centre pin, without brake.
- CBF-G: turning plate bracket and threaded centre pin, with brake.
- FBL-G: turning plate bracket and centre pass-through hole, without brake.
- FBF-G: turning plate bracket and pass-through hole, with brake.

E+G RE.F5 Wheel

Elesa+Ganter RE.F5 aluminum wheel with ball bearings and solid cast polyurethane tread.
Ideal solution for large loads and continuous movement.
Max load:
Type: RE.F5-2200-8500 N.
Type: RE.F5-N-2000-3000 N.
Type: RE.F5-H-3500-7500 N.

E+G RE.F4 Wheel

Elesa+Ganter RE.F4 cast iron wheel with ball bearings and solid cast polyurethane tread.
Ideal solution for large loads and continuous movement.
Max load:
Type: RE.F4-3000-25000 N.
Type: RE.F4-H-3500-7500 N.
Type: RE.F4-WH-5500-9000 N.
Type: RE.F4-WEH-10000-23000 N.

E+G RE.F8 Wheel

Elesa+Ganter RE.F8 monolithic (hard tread) wheel in polyamide-based techno polymer (PA). to solvents, oil and other chemicals.
Max load:
Type: RE.F8-1200-9000 N.
Type: RE.F8-N-1200-3000 N.
Type: RE.F8-H-3000-7300 N.
Type: RE.F8-WH-6500-9000 N.

E+G RE.G1 Wheel

Elesa+Ganter RE.G1 thermoplastic rubber wheels in polypropylene-based techno-polymer (PP).
Resistant to solvents, oil and other chemicals.
Gray Anti-track thermoplastic wheel hardness 85 Shore A.
Max load:
Type: RE.G1-700-1300 N.
Type: RE.G1-N-700-1800 N.

E+G RE.E2 wheels Vulcanized

Elesa+Ganter RE.E2 vulcanised rubber wheels in NBR hardness 83 Shore A.
Max load:
Type: RE.E2-650-2250 N.
Type: RE.E2-650-2250 N.

E+G RE.E3 Wheel

Elesa+Ganter RE.E3 vulcanized NBR rubber wheels, hardness 83 Shore A.
Max load:
Type: RE.E3-650-2300 N.
Type: RE.E3-N-650-2300 N.

E+G RE.G2 Elastic rubber wheels

Elesa+Ganter RE.G2 elastic rubber wheels, hardness 83 Shore A.
Max load:
Type: RE.G2-1800-5000 N.
Type: RE.G2-H-18-5000 N.

E+G RE.G5 Polyurethan Wheel

Elesa+Ganter RE.G5 Injection molded polyurethane wheels, hardness 95 Shore A.
Max load:
Type: RE.G5-7000-10000 N.

E+G RE.C7 Wheel

Elesa+Ganter RE.C7 Gray traces anti-vulcanized rubber.
Polyamide-based techno polymer (PA).
Resistant to solvents, oil and other chemicals.
Max load:
Type: RE.C7-300-550 N.

E+G RE-C7-G wheel rubber

Elesa+Ganter wheel type RE.C7 are vulcanized rubber wheels for general use and are now available with diameters from 40 mm to 80 mm.

E+G RE.F7-N-HT Heat resistant

Elesa+Ganter RE.F7-N-HT heat resistant wheels.

The wheels are resistant to high temperatures, RE.F7-N-HT wheel is particularly suitable for use in food industries and cooking ovens, especially in the baking sector.

Technical information:

Wheel centre body:
Phenolic based (PF) Duroplast monolithic wheel, resistant to temperatures up to 300°C.

Rolling action:
Hub with steel or stainless steel tube (SST executions) and PTFE bosses.

Turning plate bracket:
Zinc-plated steel or AISI 304 stainless steel (SST version) sheet, the bracket is designed to withstand loads up to 2000N. The presence of a double ball race turns and the direct contact between the plate and the ball race ring with built-in pin ensure excellent manouve ability. Does not require maintenance.

E+G RE.F2 Soft polyurethane wheel

Elesa+Ganter RE.F2 polyurethane wheel.

RE.F2 polyurenthan wheel is a easy running wheel that reduces friction at heavy loads. The wheel is also suitable for environments where quietness is a requirement.

Technical information:
Wheel: Soft mould-on polyurethane, hardness 75 Shore A.
Pressure die-cast aluminium hub with ball bearings. Ideal solution for heavy loads and continuous moving.

Fixed plate bracket:
- Zinc-plated steel sheet, the bracket is designed to withstand loads up to 2000N.

Turning plate bracket:
- Zinc-plated steel sheet, the bracket is designed to withstand loads up to 2000N.
The presence of a double ball race turns and the direct contact between the plate and the ball race ring with built-in pin ensure excellent manoeuvrability.

Standard executions:
- PSL-N: fixed plate bracket, without brake.
- SSL-N: turning plate bracket, without brake.
- SSF-N: turning plate bracket, with brake.

E+G RE.F5-ESD polyurethane wheel

Elesa+Ganter RE.F5-ESD ESD mould-on polyurethane wheels.

The special polyurethane with electrical resistivity <109 Ω prevents the accumulation of electrostatic charge. RE.F5-ESD wheels are therefore suitable for applications in "ESD PROTECTED AREAS" where all components sensitive to electrostatic discharges must be treated with the minimum risk of damage. The electrical specifications meet the requirements of the ISO 22878:2004 standard. The electrical resistivity values indicated have been measured in the temperature range 18-25°C (as per regulations). For environments with operating temperatures below 10°C, contact ELESA sales service. Suitable for use in environments with the presence of atmospheric agents, alcohols and glycols, use in environments with the presence of organic and mineral acids, basic solutions and saturated vapour is not recommended. Excellent rolling resistance and elasticity features, high wear and tearing resistance.

Material:
Covering in Mould-on polyurethane, hardness 90 Shore A, dark grey, anti-trace. Electrical resistivity < 109 Ω.
Wheel centre body in pressure die-cast aluminium.
Hub with shielded ball bearings. Ideal solution for heavy loads and continuous moving.

E+G RE.F5-N-ESD polyurethane wheel

Elesa+Ganter RE.F5-N-ESD mould-on polyurethane wheels.

Load: 1700-3000 N

The special polyurethane with electrical resistivity <109 Ω prevents the accumulation of electrostatic charge. RE.F5-ESD wheels are therefore suitable for applications in "ESD PROTECTED AREAS" where all components sensitive to electrostatic discharges must be treated with the minimum risk of damage. The electrical specifications meet the requirements of the ISO 22878:2004 standard. The electrical resistivity values indicated have been measured in the temperature range 18-25°C (as per regulations). For environments with operating temperatures below 10°C, contact ELESA sales service. Excellent rolling resistance and elasticity features, high wear and tearing resistance.

Material:
Covering in mould-on polyurethane, hardness 90 Shore A, dark grey, anti-trace. Electrical resistivity < 109 Ω.
Wheel centre body in pressure die-cast aluminium.
Hub with shielded ball bearings. Ideal solution for heavy loads and continuous moving.
Fixed plate bracket in zinc-plated steel sheet, the bracket is designed to withstand loads up to 3000N.
Turning plate bracket in zinc-plated steel sheet, the bracket is designed to withstand loads up to 3000N.
The presence of a double ball race and direct contact between the plate and the ball race ring with built-in pin ensure excellent manoeuvrability.
Does not require maintenance.
It consists of:
fitting plate: electrolytically zinc-plated steel plate;
fork: electrolytically zinc-plated steel plate;
ball race ring: electrolytically zinc-plated steel plate;
central pin: incorporated in the plate, cold reflanged;
rotation system: dual grease-lubricated ball race;
dust seal: RAL 7015 dark grey technopolymer.
Total brake that locks the wheel and bracket rotation made from hardened carbon steel spring.

The optimised dimensions and the retractible pedal ensure minimal space occupied and maximum actuation ease. The trolley must be turned to use the device. The brake is simple and effective to use: it is actuated and released by a simple action from the top downward at the tip of two separate pedals, thus ensuring the utmost manoeuvring comfort.

Standard executions:
PSL-N-ESD: fixed plate bracket, without brake.
SSL-N-ESD: turning plate bracket, without brake.
SSF-N-ESD: turning plate bracket, with brake.
FSL-N-ESD: turning plate bracket and centre pass-through hole, without brake.
FSF-N-ESD: turning plate bracket and centre pass-through hole, with brake.

E+G RE.F5-H-ESD polyurethane wheel

Elesa+Ganter RE.F5-H-ESD mould-on polyurethane wheels.

Load: 3200-6800N

The special polyurethane with electrical resistivity <109 Ω prevents the accumulation of electrostatic charge. RE.F5-ESD wheels are therefore suitable for applications in "ESD PROTECTED AREAS" where all components sensitive to electrostatic discharges must be treated with the minimum risk of damage. The electrical specifications meet the requirements of the ISO 22878:2004 standard. The electrical resistivity values indicated have been measured in the temperature range 18-25°C (as per regulations). For environments with operating temperatures below 10°C, contact ELESA sales service. Excellent rolling resistance and elasticity features, high wear and tearing resistance.

Material:
Covering made from mould-on polyurethane, hardness 90 Shore A, dark grey, anti-trace. Electrical resistivity < 109 Ω.
Wheel centre body made from Pressure die-cast aluminium.
Hub with shielded ball bearings. Ideal solution for heavy loads and continuous moving.
Fixed plate bracket made from zinc-plated steel sheet, the bracket is designed to withstand loads up to 3000N.
Turning plate bracket: Yellow zinc-plated steel sheet. The bracket is designed to withstand loads up to 6800 N. It ensures capacities that make it suitable for heavy industrial applications.
It consists of:
fitting plate: yellow zinc-plated steel sheet;
fork: yellow zinc-plated steel sheet;
ball race ring: yellow zinc-plated steel sheet;
central pin: class 8.8 steel screw and steel nut;
rotation system: dual grease-lubricated ball race;
dust seal: RAL 7015 dark grey technopolymer.

Brake:
Front brake (RE.F5-125) or rear brake (RE.F5-150-200) dual-effect with simultaneous locking of wheel and bracket.
The brake is simple and effective to use: it is actuated and released by a simple action from the top downward at the tip of two separate pedals, thus ensuring the utmost manoeuvring comfort.
The braking efficacy may be adjusted with a socket head screw M8 (only for wheels with rear brake RE.F5-150-200).

Standard executions:
PSL-H-ESD: fixed plate bracket, without brake.
SSL-H-ESD: turning plate bracket, without brake.
SSF-H-ESD: turning plate bracket, with brake.

Close

Share site

Please fill in the form below with your details. Fields marked with must be completed

Share site

Thank you for sharing this page. Your friend will shortly receive an email.
Close

Newsletter

Subscribe

Close

Send us an email

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Call me request

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Log in

Please fill in the form with your username and password to log in at Brd. Klee



Have you forgotten your password?
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • Own profile with own lot number, reordering and favourites
  • 24 hours service
Close

Lost Password

Please give us your email, and we will send you instructions on how to reset your password to your mail.


Recover password
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • My profile with own lot number, reordering and favorites
  • 24 hours emergency service
Close

Create profile

Please fill in the form below with your request. Fields marked with must be completed




Close

Complete

There is now sent a request for inclusion in our customer base.

If your company is recognized for the terms you will within 24 hours receive an email with your password.

Welcome to Brd. Klee

Close