Elesa+Ganter GN 99.2 Adjustable clamping levers
Material
Blackened Steel.
Threaded stud
Tensile strength class 5.8 (500N/mm2).
Standard versions available
- Type M: Straight lever.
- Type N: Angled lever.
Elesa+Ganter GN 99.2 Adjustable clamping levers
Material
Blackened Steel.
Threaded stud
Tensile strength class 5.8 (500N/mm2).
Standard versions available
- Type M: Straight lever.
- Type N: Angled lever.
Elesa+Ganter GN 101 Adjustable hand levers
Handle
Zinc die casting
plastic coated
black, RAL 9005, textured finish
orange, RAL 2004, textured finish
Elesa+Ganter GN 101 Adjustable hand levers
Handle
Zinc die casting
plastic coated
black, RAL 9005, textured finish
orange, RAL 2004, textured finish
Elesa+Ganter GN 101.1 Adjustable hand levers
Handle
Zinc die casting
plastic coated
black, RAL 9005, textured finish
orange, RAL 2004, textured finish
Elesa+Ganter GN 101.1 Adjustable hand levers
Handle
Zinc die casting
plastic coated
black, RAL 9005, textured finish
orange, RAL 2004, textured finish
Elesa+Ganter GN 126 adjustable flat tension lever.
Adjustable flat tension lever GN 126 is characterized by their low height and the timelessly elegant design. They are ideal whenever swiveling in a confined space is required or the lever is to be clamped in a particular position. The threaded insert / bored bushing is moveably attached to the handle with serrations. Pulling the lever disengages the serrations, allowing it to be swiveled to the ideal clamping position. On “releasing” the handle, the serrations reengage automatically.
Handle made from Zinc die casting
Plastic coated
- black, RAL 9005, textured finish SW
- silver, RAL 9006, textured finish SR
Hub cover made from plastic
- black for SW
- light gray for SR
Countersunk screw in Stainless Steel
- chemically blackened for SW
- blank for SR
Threaded bushing / bore bushing in Steel, blackened
Elesa+Ganter GN 126.1 adjustable flat tension lever
Adjustable flat tension lever GN 126.1 is characterized by their low height and the timelessly elegant design. They are ideal whenever swiveling in a confined space is required or the lever is to be clamped in a particular position. The threaded insert / bored bushing is moveably attached to the handle with serrations. Pulling the lever disengages the serrations, allowing it to be swiveled to the ideal clamping position. On “releasing” the handle, the serrations reengage automatically.
Handle made from Zinc die casting
Plastic coated
- black, RAL 9005, textured finish SW
- silver, RAL 9006, textured finish SR
Hub cover in Plastic
- black for SW
- light gray for SR
Countersunk screw in Stainless Steel
- chemically blackened for SW
- blank for SR
Threaded bushing / bore bushing in Stainless Steel AISI 303
Elesa+Ganter ERM. Adjustable handles
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colour
RAL 2004 orange, RAL 3000 red, RAL 9006 grey, RAL 9005 black matte finish.
Clamping element
Black-oxide steel with toothed element for coupling to the lever body, treated steel retaining screw and return spring.
Elesa+Ganter ERM.SST Adjustable handle
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colour
RAL 2004 orange, RAL 3000 red, RAL 9006 grey, RAL 9005 black matte finish.
Clamping element
AISI 303 stainless steel with toothed element for coupling to the lever body, stainless steel retaining screw and return spring.
Elesa+Ganter ERM.p Adjustable handles
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colour
RAL 2004 orange, RAL 3000 red, RAL 9006 grey, RAL 9005 black matte finish.
Clamping element
Black-oxide steel with toothed element for coupling to the lever body, treated steel retaining screw and return spring.
Elesa+Ganter ERM.SST-p Adjustable handles
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colour
RAL 2004 orange, RAL 3000 red, RAL 9006 grey, RAL 9005 black matte finish.
Clamping element
AISI 303 stainless steel with toothed element for coupling to the lever body, stainless steel retaining screw and return spring.
Elesa+Ganter GN 300 Adjustable mini handle
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colours
- RAL 9005 black matte finish SW.
- RAL 2004 orange OS.
- RAL 3000 red textured finish RS.
- RAL 9006 silver SR.
- RAL 9001 graphite black SZ.
- Chromium-plated CR.
- Uncoated RH.
Clamping element
Black-oxide steel with threaded hole and toothed element for coupling to the lever body, treated steel retaining screw and
return spring.
Elesa+Ganter GN 300 Adjustable mini handle
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colours
- RAL 9005 black matte finish SW.
- RAL 2004 orange OS.
- RAL 3000 red textured finish RS.
- RAL 9006 silver SR.
- RAL 9001 graphite black SZ.
- Chromium-plated CR.
- Uncoated RH.
Clamping element
Black-oxide steel with threaded hole and toothed element for coupling to the lever body, treaded steel retaining screw and
return spring.
Elesa+Ganter GN 300.1 Adjustable mini handle
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colours
- RAL 9005 black matte finish SW.
- RAL 2004 orange OS.
- RAL 3000 red textured finish RS.
- RAL 9006 silver SR.
- RAL 9001 graphite black SZ.
- Chromium-plated CR.
- Uncoated RH.
Clamping element
AISI 303 stainless steel with threaded hole and toothed element for coupling to the lever body, stainless steel retaining screw
and return spring.
Elesa+Ganter GN 300.1 Adjustable mini handle
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colours
- RAL 9005 black matte finish SW.
- RAL 2004 orange OS.
- RAL 3000 red textured finish RS.
- RAL 9006 silver SR.
- RAL 9001 graphite black SZ.
- Chromium-plated CR.
- Uncoated RH.
Clamping element
AISI 303 stainless steel with threaded stud and toothed element for coupling to the lever body, stainless steel retaining screw
and return spring.
Elesa+Ganter GN 300.4 Adjustable handles with high tightening clamping force
Material
Zinc alloy die-cast, epoxy resin coating.
Colour
- RAL 9005 black matte finish SW
- RAL 2004 orange OS
- RAL 3000 red textured finish RS
- RAL 9006 silver SR
- RAL 9011 graphite black CR
- chromium-plated RH
Elesa+Ganter GN 300.4 Adjustable handles with high tightening clamping force
Material
Zinc alloy die-cast, epoxy resin coating.
Colour
- RAL 9005 black matte finish SW
- RAL 2004 orange OS
- RAL 3000 red textured finish RS
- RAL 9006 silver SR
- RAL 9011 graphite black CR
- chromium-plated RH
Elesa+Ganter GN 300.5 Adjustable handle in stainless steel
E+G GN 300.6 Adjustable Stainless Steel Hand levers. Electropolished, with bushing / with threaded stud
Adjustable hand levers GN 300.6 with full Stainless Steel Handle, correspond to applications where „agressive“ surrounding
conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position.
The centre insert is connected to the lever via serrations which can easily be disengaged.
Types:
- Type AS: with external hexagon
- Type IS: with internal hexalobular
Material:
- Handle: Stainless Steel, precision casting, AISI CF-8, electropolished
Version with bushing
- Bushing and retaining screw: Stainless Steel AISI 303
- Spring: Stainless Steel AISI 301
Version with threaded stud
- Threaded stud and retaining screw: Stainless Steel AISI 303
- Spring: Stainless Steel AISI 301
Elesa+Ganter GN 302 Adjustable handle
Material
Zinc alloy die-cast.
Colour
RAL 9005 black SW, RAL 2004 orange OS, RAL 3000 red RS,
RAL 9006 silver SR, matte finish, epoxy resin coating.
Adjustable hand levers GN 302.1 have a straight lever, not inclined, being parallel to the clamping space.
Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.
Handle made from Zinc die casting
Plastic coated
- SW: Black, RAL 9005
- OS: Orange, RAL 2004
- RS: Red, RAL 3000
- SR: Silver, RAL 9006
Material:
Bushing, thread stud and retaining screw in Stainless steel AISI 303
Adjustable hand levers GN 302.2 have a straight lever, not inclined, being parallel to the clamping space. Ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged. Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.
Material:
Handle in zinc die casting with powder coating in different colours (se colours below)
Version with bushing: Bushing and retaining screw, Steel zinc plated, blue passivated
Version with threaded stud: Threaded stud and retaining screw, Steel zinc plated, blue passivated
Colour options:
- Black, RAL 9005, textured finish SW
- Orange, RAL 2004, textured finish OS
- Red, RAL 3000, textured finish RS
- Silver, RAL 9006, textured finish SR
Elesa+Ganter GN 303.2 adjustable lever in zinc die casting.
Adjustable hand levers GN 303.2 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged. The releasing button is a design element that offers an easy disengagement. Its use is limited to applications where dismantling of the lever for installation is not required.
Material:
- Handle in zinc die casting, plastic coated, black, RAL 9005, textured finish SW
- Releasing button in plastic, choose between three colours (see below)
- Bushing, steel, zinc plated, blue passivated
- Threaded stud, steel, szinc plated, blue passivated
Colour choices release button:
- black, RAL 9005 S
- orange, RAL 2004 O
- gray, RAL 7035 G
Elesa+Ganter GN 303 Adjustable handle
Lever body
Zinc alloy die-cast.
Colour
RAL 9005 SW, black matte finish.
Push button
- Version S: RAL 9006 black matte finish.
- Version O: RAL 2004 orange.
- Version G: RAL 7035 grey.
Clamping element
Black-oxide steel with threaded hole and toothed element for coupling to the lever body, treated steel retaining screw and
return spring.
Elesa+Ganter GN 303.1 Adjustable handle
Lever body
Zinc alloy die-cast, epoxy resin coating.
Colour
RAL 9005 SW, black matte finish.
Push button
- Version S: RAL 9006 black matte finish.
- Version O: RAL 2004 orange.
- Version G: RAL 7035 grey.
Clamping element
AISI 305 stainless steel threaded insert.
Elese+Ganter GN 305 adjustable stainless steel hand lever for use in hygienic areas.
Specification:
– Stainless steel – AISI 304
– Polished (Ra<0,8 µm PL
Sealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR), blue
temperature resistant -25 °C to +150 °C
Hardness 85±5 Shore A
FDA compliant
Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position.
The threaded insert is moveably attached to the handle with serrations. When pulling the handle, the serration frees itself and can be re-located into any required position. Engagement is achieved by releasing the lever.
The sealed flange surface enables components to be mounted without dead spaces.
The high quality finish as well as the large corner radii and enclosed surfaces prevent adherence of dirt and facilitate cleaning.
Elesa+Ganter GN 306 Adjustable hand lever
Types
- Type MS: Brass tipp
- Type KU: Plastic tipp
- Type DZ: Hardened oval tipp
- Type ZK: Spherical end
- Type KD: Spherical end with swivel thrust pad
Hand lever made from zinc die casting with plastic coating in the following colours:
- black, RAL 9005, textured finish SW
- orange, RAL 2004, textured finish OS
- red, RAL 3000, textured finish RS
- silver, RAL 9006, textured finish SR
Threaded stud and retainig screw in Steel, blackened.
Thrust Point in one of the following materials
- Type MS: Brass
- Type KU: Plastic (POM)
- Type DZ: Steel, hardened (Oval Point)
Thrust pad in Plastic (Polyacetal POM)
- temperature resistant up to 80 °C
- black, matt
E+G GN 307 adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position.
On releasing the handle the serrations re-engage automatically.
When pulling the handle, the serration frees itself and can be re-located into any required position.
Engagement is achieved by „releasing“ the lever.
The washer cannot be removed. One typical application is to use the hand lever for slots.
Type:
Handle made from Zinc die casting with plastic coating in the following colours:
- SW: Black, RAL 9005
- OS: Orange, RAL 2004
- RS: Red, RAL 3000
- SR: Silver, RAL 9006
Elesa+Ganter GN 300.6 Adjustable handle
2 versions available:
- Type AS: with external hexagon.
- Type IS: with internal hexagon.
Material:
Lever body: Stainless steel AISI CF-8 (precision casting), electropolished.
Clamping element: AISI 303 stainless steel with threaded hole and toothed element for coupling to the lever body, AISI 303 stainless steel screw
and AISI 301 stainless steel return spring.
Elesa+Ganter GN 300.6p Adjustable handle
Avaiable in 2 versions:
– Type AS: with external hexagon.
– Type IS: with internal hexagon.
Material:
Lever body in Stainless steel AISI CF-8 (precision casting), electropolished.
Clamping element in AISI 303 stainless steel with threaded hole and toothed element for coupling to the lever body, AISI 303 stainless steel screw
and AISI 301 stainless steel return spring.
Elesa & Ganter GN 188 Stainless Steel-Serrated locking plate
With the aid of Stainless Steel-Serrated locking plates GN 188, standard components can be interlocked and firmly attached in defined angular increments. They are joined by welding.
The toothing is positioned exactly on the alignment holes d4, which guarantees a parallel or right-angled arrangement. The thrust spring is placed between the toothed discs during assembly and ensures that the toothed discs separate properly when loosening. The scope of delivery includes two serrated locking plates, one thrust spring and, depending on the version, a threaded bushing.
Versions:
- Type A: with pass-through hole, without bushing
- Type B: with threaded bushing
- Type C: with threaded bushing and centring step
Stainless Steel precision casting NI in AISI CF-8
Threaded bushing in Stainless Steel AISI 304
Thrust spring in Stainless Steel AISI 301
Benifits for you as a customer at Brd. Klee
Benifits for you as a customer at Brd. Klee
