E+G Clamping levers steel

E+G DIN 6337 Clamping lever

Elesa+Ganter DIN 6337 Clamping levers
Lever body
Turned and black-oxide steel.
Assembly
- Type K: plain through hole with straight arm.
- Type L: plain through hole with inclined arm by a 20° angle.
- Type M: tapped through hole with straight arm.
- Type N: tapped through hole with inclined arm by a 20° angle.
Ball
Phenolic based (PF) Duroplast, black colour, glossy finish type DIN 319. Resistant to solvents, oils, greases and other chemical
agents.

E+G GN 99.5 clamp nut

Elesa+Ganter GN 99.5 Clamping levers
Material
Zinc-plated steel, blue passivated.
Assembly
Tapped through hole.

E+G GN 99.6 clamp nut

Elesa+Ganter GN 99.6 Clamping levers
Material
- AISI 304 stainless steel, sandblasted matte finish. The lever arm is butt-welded to the hub.
- AISI 316L stainless steel, matte shot-blasted.
Assembly
Tapped through hole.

E+G GN 99.7 clamp nut

Elesa+Ganter GN 99.7 Clamping nuts with double lever
Material
Zinc-plated steel, blue passivated. The two lever arms are butt-welded to the hub.
Assembly
Tapped through hole.

E+G GN 99.8 clamp nut

Elesa+Ganter GN 99.8 Clamping nuts with double lever
Material
AISI 304 stainless steel, sandblasted matte finish. The two lever arms are butt-welded to the hub.
Assembly
Tapped through hole.

E+G GN 206 clamp nut

Elesa+Ganter GN 206 Clamping levers
Material
Malleable cast iron, smooth finish, paintable.
Assembly
Tapped through hole.

E+G GN 206.1 clamp nut

Elesa+Ganter GN 206.1 Clamping nuts with double lever
Material
Malleable cast iron (GT / GS) fettled and tumbled.
Assembly
Tapped through hole.

E+G GN 204 short clamping lever

Elesa+Ganter GN 204 Short clamping levers
Material
Turned and blackened steel.
Standard versions available
- Type N: Angled lever with threaded bore.
- Type L: Angled lever with plain bore H7.

E+G GN 212 tension lever

Elesa+Ganter GN 212 Handle levers
Lever body
Black-oxide turned ground steel.
Handle
Turned and polished black-oxide steel arm inclined by a 20° angle with DIN 319 black phenolic based (PF) Duroplast ball
knob.
Assembly
- Version C: hub with standard H7 tolerance plain blind hole.
- Version E: with tapped hole.
For fixing GN 212 on shafts by a grub screw see Technical Data.

E+G GN 212-NI tension lever

Elesa+Ganter GN 212-NI Handle levers
Lever body
Matte shot-blasted AISI 303 stainless steel.
Handle
Matte shot-blasted AISI 303 stainless steel arm inclined by a 20° angle with DIN 319 black phenolic based (PF) Duroplast ball
knob.
Assembly
Hub with tapped blind hole.
For fixing GN 212 on shafts by a grub screw see Technical Data.

E+G GN 206-NI clamping handle

Elesa+Ganter GN 206-NI Clamping lever

Material AISI CF-8 stainless steel, fine-casting, shot blasted.
Contact faces machined.
Assembly: Tapped through hole.

E+G GN 206.1-NI clamp nut

Elesa+Ganter GN 206.1-NI Clamping handle

Material: AISI CF-8 stainless steel, fine-casting, shot blasted. Contact faces machined.
Assembly: Tapped through hole.

E+G DIN 99 clamping lever

Elesa+Ganter DIN 99 Clamping levers
Material
Turned and black-oxide steel.
Assembly
- Type K: plain through hole with straight arm (only for R=50 to 160).
- Type L: plain through hole with inclined arm by a 20° angle.
- Type M: tapped through hole with straight arm (only for R=50 to 160).
- Type N: tapped through hole with inclined arm by a 20° angle.

E+G DIN 99-NI lever handle

Elesa+Ganter DIN 99-NI Clamping levers
Material
AISI 303 stainless steel, sandblasted matte finish.
Assembly
- Type L: plain through hole with inclined arm by a 20° angle.
- Type N: tapped through hole.