Here you have the possibility to choose between all sizes and types of handwheels manufactured by Elesa+Ganter.
Here you have the possibility to choose between all sizes and types of handwheels manufactured by Elesa+Ganter.
Here you have the possibility to choose between all sizes and types of crank handles manufactured by Elesa+Ganter.
Elesa+Ganter VRTP. Spoked handwheels
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss-cap
Anodised aluminium self-adhesive front plate.
VRTP.375: cover in polyester based technopolymer (PBT), grey colour RAL 7035, glossy finish. Provided with the supply,
press-fit assembly, removable by pressing on the outer edge (ELESA original design).
Standard execution
Black-oxide steel boss, H7 reamed hole.
Elesa+Ganter VRTP+I Spoked handwheels with revolving handle
Material:
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Boss-cap: Anodised aluminium self-adhesive front plate.
VRTP.375: cover in polyester based technopolymer (PBT), grey colour RAL 7035, glossy finish. Provided with the supply, press-fit assembly, removable by pressing on the outer edge (ELESA original design).
Black-oxide steel boss, H7 reamed hole.
With revolving handle I.621+x in polyamide based (PA) technopolymer, black colour, matte finish.
Elesa+Ganter VRTP+IEL Spoked handwheels with handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss-cap
Anodised aluminium self-adhesive front plate.
with revolving handle IEL+x-SOFT (see page ) in technopolymer
coated with "soft-touch" thermoplastic elastomer (TPE), black colour,
matte finish.
Elesa+Ganter VRTP+IR Spoked handwheels with fold-away handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss-cap
Anodised aluminium self-adhesive front plate.
VRTP.375: cover in polyester based technopolymer (PBT), grey colour RAL 7035, glossy finish. Provided in the supply press-fit
assembly, removable by pressing on the outer edge (ELESA original design).
Elesa+Ganter VRTP-P+I-SSTSpoked handwheels with solid section and revolving handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Certified in compliance with FDA (U.S. Food and Drug Administration).
Colour
Black, matte finish.
Boss-cap
AISI 304 stainless steel self-adhesive front plate (adhesive certified in compliance with FDA U.S. Food and Drug
Administration).
Elesa+Ganter VRTP-P+IR-SST Spoked handwheels with solid section and fold-away handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Certified in compliance with FDA (U.S. Food and Drug Administration).
Colour
Black, matte finish.
Boss-cap
AISI 304 stainless steel self-adhesive front plate (adhesive certified in compliance with FDA U.S. Food and Drug
Administration).
Elesa+Ganter GN 322 Spoked handwheels
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Assembly
- Version B: H7 reamed hole.
- Version K: H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 322-A on shafts by a grub screw see Technical Data.
Revolving handle only for GN 322-R
Elesa+Ganter GN 324 Spoked handwheels
Material
Aluminium with black epoxy resin coating, turned rim.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 324 on shafts by a grub screw see Technical Data.
Revolving handle only for GN 324-R
Type GN 798 in polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other
chemical agents. The two-volume special design of the handle provides the operator's hand with a safe and ergonomic grip
when turning the handwheel.
Elesa+Ganter GN 322.3 Spoked handwheels with fold-away handle
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Assembly
- Version B: H7 reamed hole.
- Version K: H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 322.3 on shafts by a grub screw see Technical Data.
Fold-away handle
Type GN 798.3 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other
chemical agents. The two-volume special design of the handle provides the operator’s hand with a safe and ergonomic grip
when turning the handwheel.
Elesa+Ganter GN 322.7 Spoked handwheels with safety fold-away handle
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Fold-away handle
GN 598.7 (type KU) phenolic based (PF) Duroplast, black colour. Resistant to solvents, oils, greases and other chemical
agents.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 322.7 on shafts by a grub screw see Technical Data.
- Type R: with revolving retractable handle
Elesa+Ganter GN 555 Spoked handwheels
Material
(PF) Duroplast, black finish.
Type
B without keyway
K with keyway
A without handle
D with revolving handle
Elesa+Ganter VR.FP handwheels without handle.
Material: High-strength, reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, glossy finish.
Bushing in black-oxide steel.
Elesa+Ganter VR.FP-A handwheels without handle
Material
High-strength, reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Elesa+Ganter VR.FP+I Spoked handwheels with revolving handle
Material
High-strength, reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Black-oxide steel hub, uncovered front end, not drilled. See table for maximum permissible boring diameter d' and d".
Revolving handle
Type I.301+x Duroplast, black colour, glossy finish.
Elesa+Ganter VR.FP+IR handwheel with fold-away handle
Material
High-resistance reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Mounting
Black-oxide steel hub, uncovered front end, not drilled. See table.
Standard executions
Black-oxide steel hub, uncovered front end, not drilled. See table for maximum permissible boring diameter d' and d".
VR.FP+IR: with fold-away handle IR.302 in phenolic based (PF) Duroplast, black colour, glossy finish.
Elesa+Ganter VRU Spoked handwheels
Material
High-strength, reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Large diameter black-oxide steel hub, uncovered front end with spot-drilling.
Elesa+Ganter VRU+I Spoked handwheels with revolving handle
Material
High-strength, reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Large diameter black-oxide steel hub, uncovered front end with spot-drilling.
Revolving handle
Type I.301+x Duroplast, black colour, glossy finish.
Elesa+Ganter DIN 950-A,D,F Spoked handwheels
DIN 950-A =Spoked handwheels
DIN 950-D =Spoked handwheels with revolving handle
DIN 950-F =Spoked handwheels with fixed handle
Material
- Version GG: nodular cast iron, turned and mirror-polished rim.
- Version AL: cast aluminium, turned and polished rim.
Hub
- Version B: H7 reamed hole.
- Version K: H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
- Version V: H11 square mounting hole (not available for D=140 and D=180).
For fixing DIN 950-F on shafts by a grub screw see Technical Data.
Elesa+Ganter GN 950.1 handwheels
Material
Cast iron
Revolving handles DIN 98
Steel, zinc plated
Type
B without keyway
K with keyway
A without handle
D with revolving handle
Elesa+Ganter GN 950.6 Spoked handwheels
Material
AISI 316 LHC stainless steel.
- acid resistant.
- hub machined.
- rim turned and polished.
- unmachined surface matt shot-blasted.
Hub
- Version B: H9 reamed hole.
- Version K: H9 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance .
For fixing GN 950.6 on shafts by a grub screw see Technical Data.
Fixed Handle only for GN 950.6-F
Type DIN 39-A4 turned and mirror-polished stainless steel.
Elesa+Ganter GN 949 Spoked handwheels
AISI CF-8 stainless steel, precision casting, rim turned, matte shot-blasted.
Hub
Machined.
- Version B: H8 reamed hole.
- Version K: H8 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 949-D on shafts by a grub screw see Technical Data.
Revolving handle only for GN 949-D
Plastic Duroplast (Phenolic PF), black, spindle AISI 304 stainless steel.
Elesa+Ganter GN 227.2 pressed st. steel spoked handwheels
Material
AISI 304 pressed stainless steel, sandblasted matte finish.
Assembly
- Version B: welded hub, H9 reamed through hole.
- Version K: welded hub, H9 reamed through hole and keyway in compliance with DIN 6885/1 P9 tolerance.
- Version V: welded hub, H11 square through hole.
For fixing GN 227.2-D on shafts by a grub screw see Technical Data.
Only for GN 227.2-D
Revolving handle
Phenolic based (PF) Duroplast, black colour, glossy finish. Resistant to solvents, oils, greases and other chemical agents.
Elesa+Ganter GN 227.1 pressed steel spoked handwheels
Material
Pressed steel, epoxy resin coating.
Colour
RAL 9005 black, glossy finish.
Hole
- Version B: welded hub, H9 reamed through hole.
- Version K: welded hub, H9 reamed through hole and keyway in compliance with DIN 6885/1 P9 tolerance.
- Version V: welded hub, H11 square through hole.
Elesa+Ganter GN 227 pressed steel spoked handwheels
Material
Pressed steel, epoxy resin coating.
Colour
RAL 9005 black (type SW), RAL 3000 red (type RT), uncoated (type RH).
Assembly
Reinforced hub with square hole.
Elesa+Ganter GN 227.4 handwheel
Material AISI 316L pressed stainless steel A4, matt shot-blasted. Assembly - Version B: without keyway,welded hub, H9 reamed through hole. - Version K: with keyway, welded hub, H9 reamed through hole - Version V: with square, welded hub, H11 square through hole.
Elesa+Ganter EMW+IEL/EMW+IR Monospoke handwheel
EMW+IEL
Material
Glass-fibre reinforced polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
- Black-oxide steel boss, H7 reamed hole.
- Execution K: bosses with hole and keyway in compliance with DIN 6885/1 P9 tolerance.
To order the handwheel with keyway complete code and description with the index -K.
Boss cap
Polyester based technopolymer (PBT) in Ergostyle colours, glossy finish; supplied not assembled, press-fit mounting,
removable by pressing on the outer edge (ELESA original design).
Available also as accessory sold separately (see table below).
Revolving handle
Type IEL+x semi-rigid thermoplastic elastomer (TPE), hardness 70 Shore D, black colour, matte finish. The two-volume
special design provides the operator's hand with a safe and ergonomic grip during rotation of the handwheel.
Only for EMW+IR
Fold-away handle
Type IR.620 polyamide based (PA) technopolymer, black colour, matte finish. The two-volume special design and the semispherical
end provide the operator's hand with a safe and ergonomic grip during rotation of the handwheel.
Elesa+Ganter GN 226 Knurled handwheels
Specification
Plastic KT
Duroplast KU
Technopolymer (Polyamide PA)
shock-resistant
black, matt finish
Hub
Steel, blackened
Elesa+Ganter GN 226.1 Cover dises for knurled handwheels GN 226
Material
Aluminium
anodized, matt natural colour
Symbol black
self-adhesive
Information
Cover discs GN 226.1 not only improve the appearance of the knurled
handwheels GN 226 , but also widen the range of applications.
Apart from the standard symbol, diagrams and or other symbols can be
printed.
Cover discs and knurled handwheels are supplied separately.
Elesa+Ganter EYK. Steering three-arm handwheels with revolving handles
Material
Glass-fibre reinforced polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss cap
Polyester based technopolymer (PBT) in Ergostyle colours, glossy finish; supplied not assembled, press-fit assembly,
removable by pressing on the outer edge (ELESA original design).
Available also as accessory sold separately (see boss cap table).
Standard execution
Black-oxide steel boss, H7 reamed hole.
Revolving handle EBS. in high-resilience polypropylene based (PP) technopolymer, black colour, matte finish, not removable.
Elesa+Ganter ETK. Steering three-arm handwheel with revolving handles
Material
Glass-fibre reinforced polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss cap
Polyester based technopolymer (PBT) in Ergostyle colours, glossy finish. Provided with the supply, press-fit assembly,
removable by pressing on the outer edge (ELESA original design).
Available also as accessory sold separately (see table).
Standard execution
Black-oxide steel boss, H7 reamed hole.
Revolving handle I.631+x high-resilience polypropylene based (PP) technopolymer, black colour, matte finish, not removable.
Elesa+Ganter VDS. Solid handwheels
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss cap
Acetal resin based (POM) technopolymer, light-grey colour, push-fit assembly, removable by pressing on the outer edge
(ELESA original design).
Standard executions
- VDS: black-oxide steel boss, H7 reamed hole.
- VDS-SST: AISI 304 stainless steel boss, H7 reamed hole.
Elesa+Ganter VDS+I Solid handwheels with revolving handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss cap
Acetal resin based (POM) technopolymer, light-grey colour, push-fit assembly, removable by pressing on the outer edge
(ELESA original design).
Standard executions
VDS+I: revolving handle type I.621+x in polyamide based (PA) technopolymer, black colour, matte finish.
Black-oxide steel boss, H7 reamed hole.
VDS+I-SST: revolving handle type I.621+x-SST in polyamide based (PA) technopolymer, black colour, matte finish.
AISI 304 stainless steel boss, H7 reamed hole.
Elesa+Ganter VDS+IEL Solid handwheels
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss cap
Acetal resin based (POM) technopolymer, light-grey colour, push-fit assembly, removable by pressing on the outer edge
Elesa+Ganter VDS+IR Solid handwheels with fold-away handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss cap
Acetal resin based (POM) technopolymer, light-grey colour, push-fit assembly, removable by pressing on the outer edge
Standard execution
- VDS+IRS: safety fold-away handle type IRS.820 in polyamide based (PA) technopolymer, black colour, matte finish with
"Fold-O-Matic"® automatically fold-away safety device.
Black-oxide steel boss, H7 reamed hole.
- VDS+IRS-SST: safety fold-away handle type IRS.820-SST in polyamide based (PA) technopolymer, black colour, matte
finish with "Fold-O-Matic"® automatically fold-away safety device.
AISI 304 stainless steel boss, H7 reamed hole.
Elesa+Ganter VDS+IRS Solid handwheels with safety fold-away handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Boss cap
Acetal resin based (POM) technopolymer, light-grey colour, push-fit assembly, removable by pressing on the outer edge
Standard execution
- VDS+IRS: safety fold-away handle type IRS.820 in polyamide based (PA) technopolymer, black colour, matte finish with
"Fold-O-Matic"® automatically fold-away safety device.
Black-oxide steel boss, H7 reamed hole.
- VDS+IRS-SST: safety fold-away handle type IRS.820-SST in polyamide based (PA) technopolymer, black colour, matte
finish with "Fold-O-Matic"® automatically fold-away safety device.
AISI 304 stainless steel boss, H7 reamed hole.
Elesa+Ganter VDT. Solid handwheels
Material
Polyamide-based (PA) glass-fibre reinforced technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
- Black-oxide steel boss, H7 reamed hole.
- Execution K: bosses with hole and keyway in compliance with DIN 6885/1 P9 tolerance.
To order the handwheel with keyway complete code and description with the index -K.
Boss cap
Acetal resin based (POM) technopolymer, black colour, matte finish, push-fit assembly, removable by pressing on the outer
edge (ELESA original design).
Ring
Matte anodised aluminium (ELESA original design).
Elesa+Ganter VDT+I Solid handwheels with revolving handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
- Black-oxide steel boss, H7 reamed hole.
- Execution K: bosses with hole and keyway in compliance with DIN 6885/1 P9 tolerance.
To order the handwheel with keyway complete code and description with the index -K.
Boss cap
Acetal resin based (POM) technopolymer, black colour, matte finish, push-fit assembly, removable by pressing on the outer
edge (ELESA original design).
Ring
Matte anodised aluminium (ELESA original design).
Revolving handle
Type I.621+x polyamide based (PA) technopolymer, black colour, matte finish. The two-volume special design and the semispherical
end provide the operator’s hand with a safe and ergonomic grip when turning the handwheel.
Elesa+Ganter VDT+IR Solid handwheels with fold-away handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
- Black-oxide steel boss, H7 reamed hole.
- Execution K: bosses with hole and keyway in compliance with DIN 6885/1 P9 tolerance.
To order the handwheel with keyway complete code and description with the index -K.
Boss cap
Acetal resin based (POM) technopolymer, black colour, matte finish, push-fit assembly, removable by pressing on the outer
edge (ELESA original design).
Ring
Matte anodised aluminium (ELESA original design).
Fold-away handle
Type IR.620 polyamide based (PA) technopolymer, black colour, matte finish. The two-volume special design and the semispherical
end provide the operator’s hand with a safe and ergonomic grip when turning the handwheel.
Elesa+Ganter VD.FP Solid handwheels
Material
High-strength, reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Black-oxide steel hub, uncovered front end:
- not drilled. See table for maximum permissible boring diameter d’ and d".
- with H7 reamed hole (execution A).
- Execution K: with H7 reamed hole (execution A) with keyway in compliance with DIN 6885/1 P9 tolerance.
To order the handwheel with keyway complete code and description with the index -K.
Ring
Matte anodised aluminium (ELESA original design). For VD.50 and VD.63 a matte anodised aluminium centre disc, instead of the ring, is supplied due to their small dimensions.
Elesa+Ganter VDG+IR Solid handwheels with graduation ring and fold-away handle
Material
High-resistance reinforced phenolic based (PF) Duroplast. Resistant to
solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Ring
Matte anodised aluminium (ELESA original design).
Graduation ring
Matte anodised aluminium with black marks and numbers. Left-hand
graduation (it increases as handwheel is turned clockwise) with 0, 10,
20... 90 numbering (100 dividing marks).
Standard execution
Black-oxide steel hub, H7 reamed hole with keyway.
Fold-away handle type IR.302 (see page ) in phenolic based (PF) Duroplast, black
colour, glossy finish.
Hole for blocking the adjustment
Brass boss at a distance R from the centre: hole (f) can be threaded M6
and used to couple other blocking elements.
Elesa+Ganter VDA+I Handwheels for metal flanges with revolving handle
Material
High-resistance reinforced phenolic based (PF) Duroplast. Resistant to
solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Revolving handle
Type I.301+x (see page ) in phenolic based (PF) Duroplast, black colour, glossy
finish.
Elesa+Ganter GN 321-A/GN 321-R Solid handwheels with/wtih out handle
GN 321-A
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Assembly
- Version B: H7 reamed hole.
- Version K: H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 321-A on shafts by a grub screw see Technical Data.
GN 321-R
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Assembly
- Version B: H7 reamed hole.
- Version K: H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 321-A on shafts by a grub screw see Technical Data.
Revolving handle
Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other
chemical agents. The two-volume special design of the handle provides the operator’s hand with a safe and ergonomic grip
when turning the handwheel.
Elesa+Ganter DIN 3670 Solid handwheels
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing DIN 3670 on shafts by a grub screw see Technical Data.
Elesa+Ganter GN 323-A/GN 323-R Solid handwheels with/with out handle
GN 323-A
Material
Aluminium with black epoxy resin coating, turned rim.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 323 on shafts by a grub screw see Technical Data.
GN 323-R
Material
Aluminium with black epoxy resin coating, turned rim.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 323 on shafts by a grub screw see Technical Data.
Revolving handle
Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other
chemical agents. The two-volume special design of the handle provides the operator’s hand with a safe and ergonomic grip
when turning the handwheel.
Elesa+Ganter GN 321.4-A/GN 321.4-D Solid safety handwheels with/with out handles
GN 321.4-A
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Assembly
Hub with keyway in compliance with DIN 6885/2 P9 tolerance.
GN 000.5 safety coupling bushing with needle bearings.
- Version DR: with engagement system by pushing.
- Version ZI: with engagement system by pulling.
GN 321.4-D
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Revolving handle
Type GN 598 steel with black epoxy resin coating.
Assembly
Hub with keyway in compliance with DIN 6885/2 P9 tolerance.
GN 000.5 safety coupling bushing with needle bearings.
- Version DR: with engagement system by pushing.
- Version ZI: with engagement system by pulling.
Elesa+Ganter GN 321.5-A/GN 321.5-D Solid safety handwheels with/with out handles
GN 321.5-A
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Assembly
Hub with keyway in compliance with DIN 6885/2 P9 tolerance.
GN 000.5 safety coupling bushing with needle bearings.
- Version DR: with engagement system by pushing.
- Version ZI: with engagement system by pulling.
GN 321.5-D
Material
Aluminium, fine sandblasted matte surface, turned and mirror-polished rim.
Revolving handle
Type GN 598 steel with black epoxy resin coating.
Assembly
Hub with keyway in compliance with DIN 6885/2 P9 tolerance.
GN 000.5 safety coupling bushing with needle bearings.
- Version DR: with engagement system by pushing.
- Version ZI: with engagement system by pulling.
Elesa+Ganter VBR.2 Two-arm handwheels
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Black-oxide steel boss, uncovered front end with pre-drilled through hole.
Arms
Matte chrome-plated steel complete with handles type I.622 polyamide based (PA) technopolymer, black colour, glossy finish.
Resistant to solvents, oils, greases and other chemical agents.
Elesa+Ganter VB.198 Four-arm handwheel
Material
High-strength, reinforced phenolic based (PF) Duroplast. Resistant to
solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Standard execution
Black-oxide steel hub, uncovered front end with pre-drilled pass-through
hole.
Elesa+Ganter GN 213 Four-arm handwheels
Material
Black-oxide and fine turned steel body.
Ball knob
DIN 319 black phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
- Version V: H11 tolerance square hole in compliance with details for square DIN 79.
Elesa+Ganter VBR.4 Four-arm handwheels
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Black-oxide steel boss, uncovered front end with pre-drilled through hole.
Arms
Matte chrome-plated steel complete with handles type I.622 polyamide based (PA) technopolymer, black colour, glossy finish.
Resistant to solvents, oils, greases and other chemical agents.
Elesa+Ganter MT. Crank handles with revolving handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
Black-oxide steel hub:
- with H9 pre-drilled blind hole.
- with H7 reamed through hole.
Self-adhesive front plate
Anodised aluminium.
Revolving handle
Type I.601+x high-resilience polypropylene based (PP) technopolymer, black colour, matte finish.
Elesa+Ganter MT+IR Crank handles with fold-away handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
Black-oxide steel hub:
- with H9 pre-drilled blind hole
- with H7 reamed through hole.
Self-adhesive front plate
Anodised aluminium.
Elesa+Ganter MT-AS Crank handles with revolving handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
- Black-oxide steel boss, H9 square through hole.
- For MT.50-AS H9 square through hole with brass reinforcement.
Elesa+Ganter MT-AT Crank handles with revolving handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
H9 reamed black-oxide steel boss.
Revolving handle
Type I.621 in technopolymer, non-dismountable.
Elesa+Ganter MT-AT+IR Crank handles with fold-awya handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Assembly
H9 reamed black-oxide steel boss.
Fold-away handle
Type IR.620 in technopolymer, black colour, matte finish.
Elesa+Ganter EKH. Crank handles with revolving handle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Grey-black, matte finish.
Assembly
Black-oxide steel hub, H7 reamed hole.
Hub cap
Glass-fibre reinforced polyamide based (PA) technopolymer in Ergostyle colours, matte finish; supplied not assembled, pushfit
assembly, removable by a screwdriver.
Available also as accessory sold separately (see table below).
Elesa+Ganter GN 471.1 Crank handles with revolving handle
Material
Aluminium, epoxy resin coating.
Colour
RAL 9005 black, matte, textured finish.
Assembly
- Version B: hub with H7 reamed through hole.
- Version V: hub with H11 square through hole, in compliance with details for square DIN 79.
For fixing GN 471 and GN 471.1 on shafts by a grub screw see Technical Data.
Elesa+Ganter GN 471.3 Crank handles with fold-away handle
Material
Aluminium, RAL 9005 black, matte epoxy resin coating with textured finish.
Assembly
- Version B: hub with H7 tolerance plain bore.
- Version V: hub with H11 tolerance square bore in compliance with details for square DIN 79.
For fixing GN 471.3 on shafts by a grub screw see Technical Data.
Fold-away handle
Type GN 598.3 (type KU) black phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Elesa+Ganter GN 472.3 Crank handles with fold-away handle
Specification
Body
Aluminium
- plastic coated
black, RAL 9005, textured finish SW
silver, RAL 9006, textured finish SR
- hub machined
Hub cover
light grey
Retractable handles GN 798.3
- Plastic, Technopolymer
black, matt finish
- Retractable mechanism
Steel, blackened
Stainless Steel-Cranked handles GN 269 have been designed to comply with stringent hygiene requirements. The cylindrical handles are made of Duroplast which in general provides good stability when exposed to chimicals.
Elesa+Ganter GN 369 stainless crank handles with revolving handle
Material
Sandblasted stainless 1.4301.
Handle: Duroplast GN 598, (max. 110oC)
Hub, H9 reamed hole.
- Execution N: with end grooving.
- Execution A: without end grooving.
GN 369.5 is mounted on shafts with a DIN 912 quill screw.
Elesa+Ganter DIN 468 Crank handles
Material
Nodular deburred cast iron, black colour, matte finsih epoxy resin coating.
Assembly
- Version B: hub with H7 reamed through hole.
- Version V: hub with H11 square through hole in compliance with details for square DIN 79.
Handle
- Type D: turned and mirror-polished steel revolving handle DIN 98.
- Type F: turned and mirror-polished steel fixed handle DIN 39.
Elesa+Ganter DIN 469 Crank handles
Material
Nodular deburred cast iron, black colour, matte finsih epoxy resin coating.
Assembly
- Version B: hub with H7 reamed through hole.
- Version V: hub with H11 square through hole in compliance with details for square DIN 79.
Handle
- Type D: turned and mirror-polished steel revolving handle DIN 98.
- Type F: turned and mirror-polished steel fixed handle DIN 39.
Elesa+Ganter ME. Balanced crank handles with revolving handle
Material
Reinforced phenolic based (PF) Duroplast. Polyamide based (PA) technopolymer for ME.95.
Resistant to solvents, oils, greases and other chemical agents.
Balancing by means of an incorporated counterweight.
Colour
Black, glossy finish.
Assembly
Black-oxide steel hub, H7 reamed hole.
ME. balanced crank handles are provided with centres already drilled for pinning to shaft. Use pins with smaller diameter than
that of the hole already drilled in the plastic material to avoid local stress.
Front plate
Matte anodised aluminium.
Elesa+Ganter METP. Balanced crank handle with revolving haandle
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Balancing by means of an incorporated counterweight.
Colour
Black, matte finish.
Assembly
Black-oxide steel boss, H7 reamed hole.
METP. balanced crank handles are provided with centres already drilled for pinning to shaft.
Centre closing cap
Technopolymer, black colour. On request and for sufficient quantities it can be supplied in other colours and customised with
marks or words.
Elesa+Ganter GN 112.1 Balanced handles with revolving handle
Material
Die cast zinc alloy, epoxy resin coating.
Colour
RAL 9005 black, matte, textured finish.
Assembly
H7 reamed blind hole.
Revolving handle
Polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemical
agents.
Elesa+Ganter GN 10 Tri-ball handles
Material
Zinc-plated turned steel, blue passivated.
Assembly
Passing through hole with H7 tolerance.
Elesa+Ganter GN 924-A Spoked handwheel
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 924 on shafts by a grub screw see Technical Data.
Elesa+Ganter GN 924-R Spoked handwheel
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly.
Revolving handle: Type GN 798 in polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other
chemical agents.
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 924 on shafts by a grub screw see Technical Data.
The two-volume special design of the handle provides the operator's hand with a safe and ergonomic grip when turning the handwheel.
Elesa+Ganter GN 924.3 Spoked handwheels with fold-away handle
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly.
Fold-away handle: Type GN 798.3 in polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and
other chemical agents.
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 924.3 on shafts by a grub screw see Technical Data.
The two-volume special design of the handle provides the operator's hand with a safe and ergonomic
grip when turning the handwheel.
Elesa+Ganter GN 924.7 Spoked handwheels with safety fold-away handle
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly.
Safety fold-away handle: Type GN 798.7 in polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and
other chemical agents.
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 924.7 on shafts by a grub screw see Technical Data.
The two-volume special design of the handle provides the operator's hand with a safe and ergonomic
grip when turning the handwheel.
Elesa+Ganter GN 923-A Solid handwheels
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 923 on shafts by a grub screw see Technical Data.
Elesa+Ganter GN 923-R Solid handwheels with revolving handle
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly
Revolving handle: Type GN 798 in polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other
chemical agents.
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 923 on shafts by a grub screw see Technical Data.
The two-volume special design of the handle provides the operator's hand with a safe and ergonomic grip
when turning the handwheel.
Elesa+Ganter GN 923.3 Solid handwhell with fold-away handle
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly.
Fold-away handle: Type GN 798.3 in polyamide based (PA) technopolymer, black colour, matte finish.
Resistant to solvents, oils, greases and
other chemical agents.
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 923.3 on shafts by a grub screw see Technical Data.
The two-volume special design of the handle provides the operator's hand with a safe and ergonomic
grip when turning the handwheel.
Elesa+Ganter GN 923.7 Solid hanwheels with safety fold-away handle
Material:
Handwheel: Aluminium pressure die casting, hub machined, rim turned.
Plastic cover: Polyamide based (PA) technoploymer, light-grey colour, push-fit assembly.
Fold-away handle: Type GN 798.7 in polyamide based (PA) technopolymer, black colour, matte finish.
Resistant to solvents, oils, greases and
other chemical agents.
Type R: with revolving handle.
Colour
- Version SW: plastic coated, black RAL 9005, textured finish.
- Version SR: plastic coated, silver RAL 9006, textured finish.
Assembly
- Version B: hub with H7 tolerance plain hole.
- Version K: hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing GN 923.7 on shafts by a grub screw see Technical Data.
The two-volume special design of the handle provides the operator's hand with a safe and ergonomic
grip when turning the handwheel.
Elesa+Ganter GN 321.6-A Safety solid handwheel
Material:
Handwheel: Aluminium, black epoxy resin coating.
Rim: Aluminium, mirror-polished.
Hub cap: Light grey acetal resin based (POM) technopolymer.
Assembly: Hub with keyway in compliance with DIN 6885/2 P9 tolerance.
Elesa+Ganter GN 321.6-D Safety solid handwheels with revolving handle
Material:
Handwheel: Aluminium, black epoxy resin coating.
Rim: Aluminium, mirror-polished.
Hub cap: Light grey acetal resin based (POM) technopolymer.
Revolving handle type GN 598: Steel black epoxy resin coating, matte finish.
Assembly: Hub with keyway in compliance with DIN 6885/2 P9 tolerance.
Elesa+Ganter GN 000.4 Safety coupling bushings for handwheels with friction bearing
Material:
Steel with PTFE-coated sliding surfaces.
Assembly:
Hardened steel hub with H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance, sheet 2 and tab for
fitting on handwheel hub.
The PTFE-coated surfaces provide minimal friction between bearing surfaces even when lubrication is being neglected. An oilhole
is provided which in the completely assembled safety handwheel connects the wheel to the hub.
Elesa+Ganter GN 000.5 Safety coupling bushings for handwheels with needle bearing
Material
Hardened steel with ground sliding surfaces.
Bushing with H7 reamed hole and keyway in compliance with DIN 6885/2 P9 tolerance.
GN 000.5 safety coupling bushings are designed in accordance with accident prevention rules: in case of push or accidental
pressure when the machine is operating, the handwheel is disengaged is in the rest position. Two roller bearings guarantee a
smooth coupling to the shaft. The two toothed elements inside the bushing fit into each other in order to couple the handwheel
to the shaft. The handwheel returns automatically to its rest position when it is released after the operation. Moreover, it is
particularly suitable on shafts with a high number of turns since friction is reduced to a minimum and therefore the handwheel
is not entrained by the rotation. GN 000.5 safety coupling bushings are suitable for assembly on handwheels in order to
guarantee maximum accident prevention safety.
Assembly instruction into the handwheel:
Make H7 reamed a hole in the hub (see table) and a keyway for coupling. Remove the threaded nut of the bushing; insert the supplied keyway in its hole; insert the bushing into the hub and screw-on the nut.
A "Push-coupling" or a "Pull-coupling" are possible following two different ways of assembling the bushing (see drawing).
Lubrication is possible through the special holes.
Elesa+Ganter ERFW+I Crank handles with revolving handle
Material:
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Grey-black, matte finish.
Standard execution: Brass boss, cylindrical blind hole, transversal semi-machined hole for pinning to shaft.
Revolving handle I.741+x in polyamide based (PA) technopolymer, black colour, matte finish.
The grooves cut into the cylindrical surface allow an effective and ergonomic grip, though necessarily limited to the fingertips, due to the small size of the handle.
Elesa+Ganter GN 327-A safety handwheels
Material:
Aluminium, rim turned and polished.
Coupling attachments
- nitrided Steel.
- Bearing surface ground and / or PTFE-coated.
- Blackened bearing flange.
Assembly
- Identification no. 1: with bearing bush.
- Identification no. 2: with centring ring.
Elesa+Ganter GN 327-D Safety handwheels with revolving handle
Material
Handwheel: Aluminium, rim turned and polished.
Revolving handle tType GN 598: Phenolic based (PF) Duroplast, black colour, glossy finish.
Coupling attachments
– nitrided Steel.
– Bearing surface ground and / or PTFE-coated.
– Blackened bearing flange.
Assembly
– Identification no. 1: with bearing bush.
– Identification no. 2: with centring ring.
Elesa+Ganter GN 228 handwheels in steel and stainless steel.
Handwheels GN 228 of sheet steel or stainless sheet steel are robust and unaffected by shocks and knocks.
The hub lengths l1 and the diameter d3 correspond to DIN 950. The Stainless Steel design is suitable for applications in highly corrosive environments thanks to the A4 materials used. On the revolving handles of type D, the O-rings minimize the radial play, protect the handle bearing from penetrating dirt and prevent noises resulting from vibration.
Types:
- Type A: without handle
- Type D: with revolving handle (only for Stainless Steel A4)
Bore codes:
- Version B: without keyway
- Version K: with keyway
- Version V: with square
Material version in Steel ST:
- Plastic coated
- Black, RAL 9005, textured finish SW
- Wheel body of sheet steel
- Hub welded
Material version in Stainless Steel AISI 316 L A4:
- Matte shot-blasted GS
- Wheel body of stainless sheet steel
- Hub welded
Revolving handle similar to I.281:
- Plastic, Duroplast black, shiny finish
- Spindle, Stainless Steel AISI 316 L
- O-Ring Rubber NBR (Perbunan)
Benifits for you as a customer at Brd. Klee
Benifits for you as a customer at Brd. Klee
