Elesa+Ganter GN 7237-NI stainless Steel-Multiple-joint hinges
are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism.
The hinges have a maximum opening angle of 180°, which provides optimal accessibility and avoids the blocking of escape routes by open doors, for example.
Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy
cleaning.
Stainless Steel-Multiple-joint hinges are generally used in pairs, meaning that one type L and one type R are used per opening.
For higher loads, e.g. from large
hatches, these can be supplemented with additional hinges of either type.
Specification
Types:
– Type L: Fixing angle piece left
– Type R: Fixing angle piece right
Friction bearing in bronze, self lubricated
Design variants
– 1. Fixing angle pieces mounted to the housing with slotted holes perpendicular to the hinge axis
– 2. Fixing angle pieces mounted to the housing with slotted holes parallel to the hinge axis
Elesa+Ganter GN 2376
Stainless Steel-Plate with threaded studs. GN 2376 is designed as accessories for Stainless Steel Multiple-joint hinges GN 7237 as well as hinges GN 235 making additional threads, bolts, nuts and washers unnecessary during installation. This eliminates the labor-intensive preinstallation of such parts as well as the need to hold them in place during tightening or loosening.
The Stainless Steel-Plates with threaded studs are fastened from the outside via through-holes in the housing wall or alternatively by welding to the inside of the wall. This results in effective protection against vandalism, and the outsides of the housing remain free of attachments that do not match the design or that should be avoided entirely in the interests of easy cleaning.
Specifications
Stainless Steel NI
- AISI 304
- matte, tumbled finish MT
Threaded studs in Stainless Steel AISI 304, pressed in
Elesa+Ganter Hinges GN 129
Material: Zinc-plated steel, blue passivated.
Rotation pin and washers: Nickel-plated brass.
Hexagon nuts: ISO 4032 Zinc-plated steel, blue passivated.
Serrated washer DIN 6797 For securing screws, Zinc-plated steel, blue passivated.
Standard versions:
- Type D: consisting of three parts.
- Type Z: consisting of two parts.
Hinges GN 129 are used for top-hung doors. The hinges are normally arranged to the side of the door. In the two-part design, the door can be unhinged with two identically arranged hinges. The three-part hinges, which generally cannot be unhinged and are mounted inside, are suitable for doors and flaps which, as anti-tamper precaution, must not be dismountable from the outside.
Elesa+Ganter GN 129.2 Hinge
For doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.
Material: Zinc-plated steel, blue passivated.
Rotation pin and washers: Nickel-plated brass.
Hexagon nuts ISO 4032: Zinc-plated steel, blue passivated.
Serrated washer DIN 6797: For securing screws, Zinc-plated steel, blue passivated.
Standard version available:
- Type C: Fixing from the back side.
Elesa+Ganter GN 129.2-A4 Hinge in stainless steel
For doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.
Material: AISI 316 Stainless Steel A4.
Hexagon nuts ISO 4032: AISI 304 Stainless Steel.
Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.
Standard version available
- Type C: Fixing from the back side.
Elesa+Ganter GN 129.2-NI Hinge
For doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the
outside as an anti-tamper device.
Material: AISI 303 Stainless Steel NI.
Hexagon nuts ISO 4032: AISI 304 Stainless Steel.
Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.
Standard version available
- Type C: Fixing from the back side.
Elesa+Ganter GN 129.3 Hinge
For doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. By using cylinder screws DIN 912, they are conveniently fixed using threads on the user side or by using through screws for different clamping thicknesses.
Material: Zinc-plated steel, blue passivated.
Pin and Washer: Nickel-plated brass.
Standard version available
- Type A: Fixing from the front side.
Elesa+Ganter GN 129.5-A4 Hinge
Used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device
Material: AISI 316 Stainless Steel A4.
Hexagon nuts ISO 4032: AISI 304 Stainless Steel
Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.
Standard version available
- Type D: consisting of three parts.
Elesa+Ganter GN 129.5-NI Hinge stainless steel
For doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device
Material: AISI 303 Stainless Steel NI.
Hexagon nuts ISO 4032: AISI 304 Stainless Steel.
Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.
Standard version available
- Type D: consisting of three parts.
Elesa+Ganter GN 136 Sheet metal hinge
Sheet metal hinges GN 136 are low-cost designs for low-load applications.
Material: Zinc-plated steel, blue passivated.
Pin: AISI 304 stainless steel.
Assembly
- Type B: with bores for cylinder head screws / pan head screws.
- Type C: with bore for countersunk screws.
Elesa+Ganter GN 136-NI Sheet metal hinge
Sheet metal hinges GN 136-NI are low-cost designs for low-load applications.
Material: AISI 304 stainless steel.
Pin: AISI 304 stainless steel.
Assembly
- Type A: without holes
- Type B: with bores for cylinder head screws / pan head screws.
- Type C: with bore for countersunk screws.
Elesa+Ganter GN 138 Hinge
With their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylish
appearance is important.
Specification:
Type A: 2x2 threaded blind bores.
plastic coated
black, RAL 9005, textured finish SW
silver, RAL 9006, textured finish SR
Pin in Stainless Steel
Elesa+Ganter GN 139.6 Hinge
The compact design combines safety and attractive appearance. The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.
Material: Polished Stainless Steel AISI 316L precision casting
Pin in Stainless Steel AISI 316L
Elesa+Ganter GN 161 Hinge
Material
Zinc alloy die-cast, black matte textured, epoxy resin coating.
Rotation pin
AISI 303 stainless steel.
Features and applications
Hinges GN 161 have been designed for commercially available aluminium profiles. With three different types of hinges only, 66
different slot widths 'n' can be accommodated. To achieve this the positioning components are set in specially marked recesses
in the hinge wings.
The rectangular (8x10 mm) positioning components, two pieces hinge wing, will prevent a misalignment. They will also carry
the weight of the door.
Elesa+Ganter GN 161.1 Hinge
Material: Zinc alloy die-cast, plastic coated.
With invisible fixing screws.
Versions:
- Version SW: RAL 9005 black, matte epoxy resin coating.
- Version SR: RAL 9006 silver, matte epoxy resin coating.
Elesa+Ganter GN 161.2 Hinge
Material: Zinc alloy die-cast, plastic coated.
With invisible fixing screws.
Surface:
- Version SW: RAL 9005 black, matte epoxy resin coating.
- Version SR: RAL 9006 silver, matte epoxy resin coating.
Assembly:
- Type R: Fixed bearing (pin) right.
- Type L: Fixed bearing (pin) left.
Elesa+Ganter GN 238 Adjustable hinge with screw-covers
Material: Zinc alloy die-cast.
Version SW: RAL 9005 black, matte finish, epoxy resin coating.
Version SR: RAL 9006 silver, matte textured finish, epoxy resin coating.
Adjustable bushes: Hardened steel.
- Type BJ: two-sided adjustable.
- Type EJ: one-sided adjustable.
- Type NJ: not adjustable.
Plastic cover: Black-grey.
Rotation pin: AISI 303 stainless steel.
GN 238 offer a technically and optically perfect aligenment of the door to its frame.
Rotation angle Max. 180°, between 0° and -20° and between 0° and 160°
Elesa+Ganter GN 337 Hinges
Material: AISI CF-8 Stainless steel NI
- Version GS: San-blasted, matte finish GS Zinc-alloy die-cast ZD, black matte epoxy resin coating.
- Version SW: RAL 9005, black, matte finish.
- Version SR: RAL 9006, silver, matte finish.
Rotation pin AISI 303 stainless steel.
- Identification no. 1: fixed bearing (pin) right.
- Identification no. 2: fixed bearing (pin) left.
Assembly: Version A: two couples of through holes for countersunk-head screws.
Rotation angle: Max. 270°, between 0° and -90° and between 0° and 180°
Elesa+Ganter GN 437 Hinge
Owing to the structure and the prestress of the friction cones, the hinge has virtually no radial play and no play at all in axial direction.
Specification
- Type A: 2x2 bores for countersunk head screw
Zinc die casting ZD
Plastic coating:
black, RAL 9005, textured finish SW
silver, RAL 9006, textured finish SR
Friction cone: Plastic (Polyacetal POM)
temperature resistant up to 80 °C
Set screw / Hexagon nut:
Steel, zinc plated, blue passivated
The setscrew in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating range. The rotation of doors and flaps is so inhibited, also preventing the inadvertent movement.
The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness.
Elesa+Ganter GN 437.1 Hinges of zinc die casting fit perfectly into a wide range of environments thanks to their timeless design. Moreover, they are matched with the GN 437 functional hinge family as complementary hinges.
Specifikationer
Type
- Type A: 2x2 bores for countersunk screws
Material:
Hinge
- Zinc die casting ZD
- plastic coated
Cover cap
- Plastic (Polyacetal POM)
- temperature resistant up to 80 °C
Color:
- Black, RAL 9005, textured finish SW
- Silver, RAL 9006, textured finish SR
Elesa+Ganter GN 437.2 hinge, lockable, with adjustable hand lever
With GN 437.2 Hinges, doors and covers can be secured at any desired angular position. In its rest position, the hand lever is not connected to the locking thread of the hinge axis, i.e., it can be freely rotated. The serration only engages when the handle is pressed down, allowing the hinge to be clamped. This prevents the engagement from releasing unintentionally. It additionally ensures that the hand lever does not hinder the movement of the door or cover. To adjust to the door or cover, the clamp must be disengaged before the hinge can be swung into the new position.
Type:
Type A: 2x2 bores for countersunk screws
Material:
- ZD: Zinc die casting, plastic coated
- Guide sleeve in Plastic (Polyacetal POM), temperature resistant up to 80 °C
- Adjustable hand lever in zinc die casting, plastic coated, (black for SW, silver for SR)
- Threaded stud and retaining screw, Steel zinc plated, blue passivated
Colours:
- SW: Black, RAL 9005, textured finish
- SR: Silver, RAL 9006, textured finish
Elesa+Ganter GN 437.3 hinge with springloaded return
GN 437.3 Hinges with a spring-loaded return allow doors to be automatically opened and closed by means of the torsion spring. The return torque varies with the hinge opening angle. Endurance tests have shown that the torque does not change even after 100,000 opening / closing cycles.
Types:
Type L2: Spring-loaded return, closing, medium spring force
Type R2: Spring-loaded return, opening, medium spring force
Material:
- ZD: Zinc die casting, plastic coated
- Spring guide and cover cap in plastic (Polyacetal POM), temperature resistant up to 80 °C
- Torsion spring in spring steel
Farver:
- Black, RAL 9005, textured finish SW
- Silver, RAL 9006, textured finish SR
Elesa+Ganter GN 437.4 hinge.
GN 437.4 Hinges with detent hold door and covers in the given indexing position without additional mechanics.
This is particularly advantageous when machines and systems must be frequently opened and closed for loading and unloading, and it is also useful for servicing or repairs. Undesirable independent closing and opening is prevented. The -3° of the type C2 moreover ensures that the door or cover presses slightly against the housing frame when closed.
Types:
- Type A2: Indexing position, -90°, 0°, 90° and 180°, medium holding torque
- Type C2: Indexing position, -3° and 117°, medium holding torque
Material:
- Zinc die casting ZD with plastic coating
- Locking elements / Cover cap in plastic (Polyacetal POM), temperature resistant up to 80 °C
- Pin in Stainless Steel AISI 303
- Compression spring in Spring steel
Colours:
- Black, RAL 9005, textured finish SW
- Silver, RAL 9006, textured finish SR
Elesa+Ganter GN 2370 Stainless Steel spacer plate
Material: Stainless Steel NI, AISI 304
With plain, matte tumbled finish MT
Elesa+Ganter GN 2372 Stainless Steel plates with tapped holes.
Dimensionally, Stainless Steel plates GN 2372 are designed as accessories for the GN 237 family of hinges, eliminating the need for nuts and washers for mounting.
Material: Stainless Steel NI AISI 304.
With matt, tumbled finish MT.
Elesa+Ganter CMD.AL hinge
Material: Anodised aluminium.
Colour: Natural, matte finish.
Rotation pin: AISI 303 stainless steel.
Guide bushings for pin: Polyamide based (PA) technopolymer.
Self-tapping screws 4.2x15.9 DIN 7982, stainless steel (narrow body of the hinge) and M5x10 semi-rounded head screws, stainless steel (large body of the hinge), supplied.
Elesa+Ganter CMM-AL Hinge
Material: Anodised aluminium.
Rotation pin: AISI 304 stainless steel.
Colour: Natural, matte finish.
Assembly: Through holes for countersunk head screws.
Rotation angle: Max 270°, between 0° and -90° and between 0° and 180°
(0°= condition where the two interconnected surfaces are on the same plane).
Elesa+Ganter GN 1362 Weld-on hinge
Information:
Stainless Steel-Sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments.
Type A is fastened via welding or holes created by the customer.
Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.
Material:
- Stainless Steel NI AISI 304
- Blank BL.
Pin:
- Stainless Steel AISI 304
- Riveted
Elesa+Ganter GN 1364 Hinge
Pointed Stainless Steel-Sheet metal hinges GN 1364 are characterized by their compact and universal dimensioning as well as their attractively shaped design. The materials used also permit applications in aggressive environments.
Type B is fastened via the existing through-holes using screws or rivets.
Material:
- Stainless steel AISI 304
- Blank BL.
Pin:
- Stainless steel AISI 304
- Riveted
Elesa+Ganter HN 237.3 Stainless Steel-Heavy duty hinges
Designed for use under tough conditions and are distinguished by a compact design. The hinge pins are integral and allow the hinges to be used in environments with strong vibrations and shocks. The selected materials allow the hinges to be used in aggressive environments. Wear is minimized by the effective friction pairing of the hinge components and lubrication.
The type B hinge has centering attachments that prevent lateral slippage under high loads and protect the mounting screws from impermissible transverse force.
Opening angle is 180 degree.
Types:
Type A: with bores for countersunk screws
Type B: with bores for countersunk screws and centering attachments
Material:
- NI: Stainless Steel German Material No. 1.4405
- GS: Matte shot-blasted
- SW: Plastic coated RAL 9005, textured finish
Hinge pin in Stainless Steel, German Material No 1.4542, Tempered, With special grease lubricated
Shim washers in Stainless Steel AISI 301, Tempered, With special grease lubricated
Elesa+Ganter GN 2294 Hinge
Elesa&Ganter GN 2294 hinges are made of drawn profiled aluminum and are used on doors and covers, for example.
Given the external hinge wing, type A hinges allow mounting with a very small door gap.
The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed.
The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be realized thanks to the modular design and available accessories.
Types:
Type A: exterior hinge wings
Type I: interior hinge wings
Material:
Hinge:
- Aluminum EL, anodized, natural color
Bearing bushing / cover cap:
- Plastic, Technopolymer (Polyamide PA) gray, RAL 7035
- Tapered dowel pin ISO 8741 Steel zinc plated, blue passivated
Elesa+Ganter GN 2290 bolt sets for hinges
GN 2290 Bolt sets are designed as accessories for GN 2291 hinge wings for mounting individual hinge versions.
Specification:
- Bolt sets with identification no. 1 are designed for hinges with two hinge wings.
- bolt sets with identification no. 2 and 3 are designed for hinges with three hinge wings.
- Bolt sets with identification no. 2 are used exclusively for short middle wings with a length of 40 mm.
- Bolt sets with identification no. 3 must be used for longer middle wings.
Material:
Bearing bushing / cover cap in Plastic, Technopolymer (Polyamide PA), gray colour, RAL 7035
Tapered dowel pin ISO 8741 in Steel zinc plated, blue passivated
Elesa+Ganter GN 2291
GN 2291 Hinge wings can be combined with GN 2290 bolt sets into individualized hinge versions.
As of a hinge wing length of l2 ≥ 250 mm, individual lengths can be realized by shortening the hinge wing given the greater hole spacings
Types:
- AF: exterior hinge wing
- AN: exterior hinge wing, with guide step
- IF: interior hinge wing
- IN: interior hinge wing, with guide step
No. A: without bores
No. C: with countersunk holes
Material:
- Anodized aluminum EL
Elesa+Ganter GN 2292 hinge for aluminum profiles.
GN 2292 Hinges are made of drawn profiled aluminum and are used on doors and covers, for example.
The guide step allows them to be quickly and easily mounted to all commercially available profile systems with a nominal size of 40 mm and groove width “n”. Given the external hinge wing, type A hinges allow mounting with a very small door gap. The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed. The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be realized thanks to the modular design and available accessories.
Types:
- Type A: exterior hinge wings
- Type I: interior hinge wings
Version C is with countersunk holes.
Material:
Aluminum anodized, natural color
Bearing bushing / cover cap in plastic, Technopolymer (Polyamide PA) gray, RAL 7035
Tapered dowel pin ISO 8741 in steel zinc plated, blue passivated
Elesa+Ganter GN 7231 stainless steel multiple joint hinge.
Stainless Steel-Multiple-joint hinges GN 7231 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick doors.
Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.
Stainless Steel-Multiple-joint hinges are generally used in pairs, meaning that one L type and one R type are used per opening. For higher loads, e.g. from large flaps or hatches, these can be supplemented with additional hinges of any type.
Types:
- Type L: Fixing angle piece, left
- Type R: Fixing angle, piece, right
Material:
- Stainless Steel 304 NI matte, ground MT
- Friction bearing in bronze, self lubricated
Elesa+Ganter GN 7233 stainless steel multiple-joint hinge.
Stainless Steel-Multiple-joint hinges GN 7233 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 120°, allowing for easy accessibility and making them suitable for use with medium-thick doors. Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning. Stainless Steel-Multiple-joint hinges are generally used in pairs, meaning that one L type and one R type are used per opening. For higher loads, e.g. from large flaps or hatches, these can be supplemented with additional hinges of any type.
Types:
Type L: Fixing angle piece, left
Type R: Fixing angle, piece, right
Material:
Stainless Steel 304 NI matte, ground MT
Friction bearing: Bronze, self lubricated
Elesa+Ganter GN 7241 multiple-joint hinge.
Stainless Steel-Multiple-joint hinges GN 7241 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick doors. Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning. Stainless Steel-Multiple-joint hinges are generally used in pairs. For higher loads, e.g. from large doors, these can be supplemented with additional hinges. Four reinforced washers are supplied, which can be used with fastening screws of thread size M6.
Material:
Aluminum AL, Anodized, natural color EL
Hinge pins / washers in Stainless Steel 304
Friction bearing in Plastic, self lubricated
temperature resistant -40 °C to 90 °C
Elesa+Ganter GN 7247 multiple joint hinges.
GN 7247 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 180°, making them perfect for use with thick doors. Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.
Stainless Steel-Multiple-joint hinges are generally used in pairs. For higher loads, e.g. from large doors, these can be supplemented with additional hinges. Four reinforced washers are supplied, which can be used with fastening screws of thread size M6.
Material:
Aluminum, Anodized, natural color
Hinge pins/washers in Stainless Steel 304
Friction bearing in Plastic, self lubricated, temperature resistant -40 °C to 90 °C
Elesa+Ganter GN 7247.2 stainless steel spacer plates.
Tolerances of chamfers, different sheet metal thicknesses or the use of seals could mean that the mounting surfaces of multiple-joint hinges on the frame and door do not have the desired separating distance.
Stainless Steel-Spacer plates GN 7247.2 are designed with appropriate dimensions as accessories for multiple-joint hinges GN 7241 GN 7243 and GN 7247 . They allow for adjustment in the third plane during mounting. Shimmed individually or in combination, they provide the desired position or height compensation on the fastening surfaces. The holes d2 receive tensioning or positioning pins, if necessary, making it easy to position the spacer plates and the multiple-joint hinges.
Material:
Stainless Steel AISI 304 NI matte MT: Ground
Elesa+Ganter GN 7247.4 stainless steel spacer plate.
Stainless Steel-Plates with tapped holes GN 7247.4 are designed with appropriate dimensions to be used as accessories for the fastening flanges of multiple-joint hinges GN 7241 GN 7243 and GN 7247. The Stainless Steel-Plates are fastened from the outside via through-holes in the housing wall or alternatively by welding to the inside of the wall. This results in effective protection against vandalism, and the outsides of the housing remain free of attachments that do not match the design or that should be avoided entirely in the interests of easy cleaning. They make threaded holes, nuts and washers unnecessary during installation. This eliminates the labor-intensive pre-installation of such parts as well as the need to hold them in place during tightening or loosening. The plate thickness s corresponds to the minimum screw-in depth of thread d1, which should be fully achieved. The holes d2 receive tensioning or positioning pins, if necessary, making it easy to position the plates and the multiple-joint hinges.
Material:
Stainless Steel AISI 304 NI matte, ground MT
Elesa+Ganter GN 7247.6 Spacer plate for hinges.
Stainless Steel-Plates GN 7247.6 are designed with appropriate dimensions to be used as accessories for the fastening flanges of multiple-joint hinges GN 7241 GN 7243 and GN 7247. The Stainless Steel-Plates are fastened from the outside via through-holes in the housing wall or alternatively by welding to the inside of the wall. This results in effective protection against vandalism, and the outsides of the housing remain free of attachments that do not match the design or that should be avoided entirely in the interests of easy cleaning. They make threaded holes, nuts and washers unnecessary during installation. This eliminates the labor-intensive pre-installation of such parts as well as the need to hold them in place during tightening or loosening. The holes d2 receive tensioning or positioning pins, if necessary, making it easy to position the plates and the multiple-joint hinges.
Material:
Stainless Steel AISI 304 NI, matte, ground MT
Threaded studs in Stainless Steel AISI 304, pressed-in
Benifits for you as a customer at Brd. Klee
Benifits for you as a customer at Brd. Klee
