E+G Hinge with signal

E+G GN 330 wire

Elesa+Ganter GN 330 cable with connector coupling
Handle: Plastic, Polyurethan-Elastomer-TPU, black colour.
Cable (Outer sheath): Polyurethan PUR, black colour.
Working temperature:
From -40 °C to +90 °C.
Assembly:
- Type G: Connector coupling straight.
- Type W: Connector coupling 90° angled.
Technical data:
- Insulating resistance: >109 Ω.
- Degree of polution: 3/2 according to ICE 60 664-1.
- Protection class: IP67 (in screwed condition) according to ICE 60 529.
Connecting nut M12x1 Nickel plated brass.

Compatible with E+G GN 331 handle with switch.

E+G GN 139.1 to GN 139.4

Elesa+Ganter Hinges GN 139.1/GN 139.2
Zinc alloy die-cast, silver metallic epoxy resin coating.
Pin: AISI 303 stainless steel.
Assembly:
- Type A: Connector plug at the top.
- Type B: Connector plug from the bottom.
- Type C: Connector plug on the backside, with 0,2 m cable
Mounting plate GN 139.3 (flat)/GN 139.4 (angle)
Steel plastic-coated, silver metallic epoxy resin coating.

E+G Hinge CFSW & CFMW

Elesa+Ganter CFSW and CFMW Hinges
Hinge body: self-extinguish high-rigidity SUPER-technopolymer, black colour. Resistant to solvents, oils, greases and other chemical agents.
Rotation pin: glass-fibre reinforced polyamide-based tecnopolymer (PA), black colour.
Standard executions
- C-A: 8 pole male connector, top axial output.
- C-C: 8 pole male connector, bottom axial output.
- C-B: 8 pole male connector, back output.
- F-A: 2 or 5 m cable, 8 conductors, top axial output.
- F-C: 2 or 5 m cable, 8 conductors, bottom axial output.
- F-B: 2 or 5 m cable, 8 conductors, back output.
- FC-B: 0,2 m cable, with 8 pole male connector, back output.
Cable type: UL/CSA STYLE 2587 8X AWG 22.
Contact blocks in the standard execution:
- NO-NC-NO-NC: 2 NO contacts + 2 NC contacts.
- NO-NC-NC-NC: 1 NO contact + 3 NC contacts.

Guidelines of plastic hinges

E+G Hinge CFSQ

Elesa+Ganter CFSQ hinge with built-in safety switch. UL compliant

Material: Self-extinguish high-rigidity SUPER-technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Rotation pin: AISI 303 stainless steel.
Standard executions:
Assembly by means of pass-through holes for M6 countersunk-head screws UNI 5933, DIN 7991.
- C-A-D: axial connector, microswitch on the right.
- C-A-S: axial connector, microswitch on the left.
- C-B-D: rear connector, microswitch on the right.
- C-B-S: rear connector, microswitch on the left.
- F-A-D: axial cable, 2 or 5 m length, microswitch on the right.
- F-A-S: axial cable, 2 or 5 m length, microswitch on the left.
- F-B-D: rear cable, 2 or 5 m length, microswitch on the right.
- F-B-S: rear cable, 2 or 5 m length, microswitch on the left.

Guidelines of plastic hinges

E+G PMW. Plates

Elesa+Ganter PMW. assembly plate on profiles with T-slot for CFSW. and CFMW. hinges

Plate: Polyamide based (PA) high-rigidity SUPER-technopolymer, black colour, matte finish.
Resistant to solvents, oils, greases and other chemical agents.
Screws and nuts: AISI 304 stainless steel.

Features and applications:
PMW assembly plates allow the mounting of CFSW.110 and CFMW.110 hinges on standard aluminium profiles of 30, 35, 40, 45 and 50 mm with T-slot.
The mounting on aluminium profiles of 40 mm can also be performed without the use of assembly plates.
The fixing screws of the plates to the profile are not accessible after the assembly of the hinges. Therefore, even with the use of PMW assembly plates, CFSW. and CFMW. hinges remain tamperproof.

The supply of the plate includes:
- PMW: 2 countersunk screws M6x12 (for CFSW.110).
- PMW-M: 2 countersunk screws M6x14 (for CFMW.110).
- 2 M6 hexagonal nuts, assembled into the plate, necessary for the fixing of the hinge to the plate.

Plates of different dimensions can be combined in case of door and doorframe made with profiles of different dimensions.

Assembly instructions
- Fix the plates on the profile in the desired position by using M6 countersunk head screws (not included in the supply) and the relative dowels for T-slot type GN 505 (not included in supply).
- Fit CFSW.110 or CFMW.110 hinge (fig. 1) on the relative plates by using M6 countersunk head screws (included in the supply).
- Place the closing caps properly (included in the supply of the hinge).

Technical data:
The use of PMW plates, properly assembled as indicated in the assembly instructions, guarantees the max limit static load of
CFSW. and CFMW. hinges.

E+G GN 139.5 Hinge

Elesa+Ganter GN 139.5 Hinge with safety switch

Type
- Type A: Connector plug at the top
- Type B: Connector plug from the bottom
- Type C: Connector plug at the back (with 0.2 m cable)
- Type CK: Cable from the back

Material: Stainless Steel precision casting,  AISI 316L, polished
Pin in Stainless Steel AISI 316L