E+G Latches

E+G GN 115-VH8 Hygienic lock

Elesa-Ganter GN 115-VH Hygienic locks
Lock housing and external square: AISI 316Ti stainless steel (A4) NI.
Locking, hexagon screw and fixing nut: AISI 304 stainless steel (A2).
Standard version available:
-Type VH8: Operation with external square spindle A/F8.
Accessories on request:
- Key GN 119.2.
- Opening handles GN 320.

E+G GN 115 Lock

Elesa+Ganter GN 115 Latch
Material: Lock housing versions in Zinc alloy die-cast. Finish - Chromium-plated (standard). - RAL 9005 black colour SW, matte finish, epoxy resin coating.
Metal elements: Zinc-plated steel, blue passivated.
Operating handles: Plastic, polyamide (PA), black matte finish.
Cover caps: Light grey (type RG, KG, HG).
Standard versions available:
- Type DK: Operation with triangular spindle.
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type VDE: Operation with double bit.
- Type SG: Operation with DIN 6336 polyamide-based (PA) technopolymer star knob with tapped blind hole.
- Type SK: Operation with polyamide-based (PA) technopolymer wrench.
- Type ST: Operation with polyamide-based (PA) technopolymer with T-handle.

E+G GN 115-NI st. steel

Elesa+Ganter GN 115-NI latch in stainless steel
Material latch: AISI 303 stainless steel NI.
Versions:
- Type DK: Operation with triangular spindle.
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type SCH: Operation with slot.
- Type VDE: Operation with double bit.
- Type SG: Operation with AISI 304 stainless steel lobe knob, type GN 5334.
Accessories on request (not included):
- Key GN 119.2.
- Protective caps GN 120.
- Opening handles GN 320.

E+G Latch CMT. AE-VO

Elesa+Ganter latches with fold-away knob CMT.AE-VO
Material: Rotor, stator, fold-away knob, closing lever and nut (M22x1.5) in glass-fibre reinforced polyamide based (PA) technopolymer, certified self-extinguish UL-94 V0.
Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Sealing washer: SBR rubber.
Self-tapping screw: AISI 304 stainless steel.
Rotation 90°.

E+G Latch CM

Elesa+Ganter CM Latch with knob.
Material: Rotor, stator and knob in nickel-plated zinc alloy.
Nut: Brass (M19x1).
Spring washer: Zinc-plated steel.
Washer (only for CML.): PVC.
Closing lever: Zinc-plated steel, 2.5 mm thickness.
Screw: Zinc-plated steel (M5x8).
Rotation 90°.
Special executions and accessories (For sufficient quantities):
- Closing levers in other dimensions.
- Brass threaded extension for prolonged positioning of the lever (code 421137 description C.PQ M5/58).

E+G Latch CM/L

Elesa+Ganter CM/L +G Latch
Material: Rotor, stator and knob in nickel-plated zinc alloy.
With knob provided with a transversal hole to insert a padlock with diameter from 5 to 7 mm.
Nut: Brass (M19x1).
Spring washer: Zinc-plated steel.
Washer (only for CML.): PVC.
Closing lever: Zinc-plated steel, 2.5 mm thickness.
Screw: Zinc-plated steel (M5x8).
Åbningsvinkel 90°.
Special executions and accessories (For sufficient quantities)
- Closing levers in other dimensions.
- Brass threaded extension for prolonged positioning of the lever (code 421137 description C.PQ M5/58).

E+G GN 119 & GN 119-Ni

Elesa+Ganter GN 119 Door lock
Material:Lock housing and operating spindle: Chromium-plated zinc alloy die-cast.
Standard versions available:
- Type SG: Operation with star knob.
- Type DK: Operation with triangular spindle.
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type VDE: Operation with double bit.
Accessories on request (not included):
- Key GN 119.2.
- Protective caps GN 120.
- Opening handles GN 320.
GN 119 door locks have a pulling-in range of 10mm. Locking is achieved by turning the door lock clockwise. The operating spindle is fitted with an O-ring to prevent the ingress of water.

E+G GN 117 door lock

Elesa+Ganter GN 117 Door locks Star knob DIN 6336
Material: Polyamide based (PA) technopolymer with tapped blind hole. Cam Sheet metal, zinc-plated and blue passivated.
Spindle and spacer tube: Tube steel, zinc-plated and blue passivated.
Assembly instructions: By turning the door clockwise the stepped and spring-loaded cam will move up behind the door frame.
GN 117 door locks are well known for their robust construction; they are vibration proof and they have a large pulling-in range of up to 10mm. Loking is achieved by turning the knob clockwise.
Simple and hence cost saving installation. Very high clamping force values.

E+G Latch VCK

Elesa+Ganter VCK Cam latches with knop type VC.192, phenolic based (PF) Duroplast.
Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, glossy finish.
Plain stud: Zinc-plated steel.
Helical latch: Sintered and vaporized steel with hole for pinning.
DIN 1481 spring dowel pin: Black-oxide steel, Ø 3x20 mm (included in the supply).
Latch spring to compensate door thickness: Zinc-plated steel.
Standard executions available:
- D: opening to the right side
- S: opening to the left side
- VCK.: assembly on doors with thickness S > 5 mm
- VCK+G: assembly on doors with thickness S ≤ 5 mm with the interposition of guide bush and nut.

E+G Security Latch BOCK., BOCK. INOX

Elesa+Ganter BOCK, BOCK INOX Latches with recessed key Shank Nickel-plated steel with triangular key mark.
Guide bush: Nickel-plated brass.
Locking nut (wrench 24): Nickel-plated brass.
DIN 6798 flat spring washer: Zinc-plated steel.
Helical latch: Sintered and vaporized steel with hole for pinning.
DIN 1481 spring dowel pin: Black-oxide steel, Ø 3x20 mm (included in the supply).
Latch spring to compensate door thickness: Zinc-plated steel.
Key: Polyamide based (PA) technopolymer, black colour, matte finish.
Resistant to solvents, oils, greases and other chemical agents.
Standard executions available:
- BOCK-D: opening to the right side.
- BOCK-S: opening to the left side.

E+G GN 218 cam latch

Elesa+Ganter GN 218 Cam latches
Material: Sintered steel.
- Execution L: with left turn clamping direction.
- Execution R: with right turn clamping direction.
GN 218 cam latches are available as right or left hand models according to the direction the door shuld be open.

E+G GN 116.1 door lock

Elesa+Ganter GN 116.1 Door lock
Materiale Housing: Zinc alloy die-cast, RAL 9005 black colour, matte finish, epoxy resin coating.
Metal elements: Zinc-plated steel, blue passivated.
Knurled knob: Polyamide based (PA) technopolymer (Type RG).
- Handle: RAL 9005 black colour, matte finish, epoxy resin coating.
- Cover caps: light grey, matte finish.

E+G Latch CQT. AE-VO

Elesa+Ganter CQT.AE-VO  latches with recessed key
Material: Stator, rotor, closing lever and nut (M22x1.5) in glass-fibre reinforced polyamide based (PA) technopolymer certified self-extinguish UL-94 V0.
Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Sealing washer: SBR rubber.
Self-tapping screw: Zinc-plated steel.
Key: Polyamide based (PA) technopolymer.
Rotation 90°.
Standard executions available:
- CQT/A: mark for two-wings key.
- CQT/T: mark for triangular key.

E+G Latch CQ

Elesa+Ganter CQ latches with recessed key
Material stator and rotor: Nickel-plated zinc alloy.
Nut: Brass (M19x1 or M22x 1.5).
Shaped closing lever: Zinc-plated steel, thicknesses 2.5 mm (for nut M19x1) or 3 mm (for nut M22x1.5).
Spring washer: Zinc-plated steel.
Sealing washer PVC (for nut M19x1) or SBR rubber (for nut M22x1.5).
Screw: Zinc-plated steel (M5x8).
Key: Polyamide based (PA) technopolymer.
Rotation 90°.
Standard executions available
- CQ/A: mark for two-wings key.
- CQ/T: mark for triangular key.

E+G Latch CQ. INOX

Elsa+Ganter CQ.INOX latch with recessed key.
Material rotor and stator: AISI 304 stainless steel.
Nut: AISI 304 stainless steel (M19x1 or M22x 1.5).
Shaped closing lever: Zinc-plated steel, thicknesses 2.5 mm (for nut M19x1) or 3 mm (for nut M22x1.5).
Spring washer: Zinc-plated steel.
Sealing washer in PVC (for nut M19x1) or SBR rubber (for nut M22x1.5).
Screw: AISI 304 stainless steel (M5x8).
Key: Polyamide based (PA) technopolymer.
Rotation 90°.
IP protection IP 65 protection class, according to IEC 529 table.
Standard executions available
- CQ/A: mark for two-wings key.
- CQ/T: mark for triangular key

E+G Latch CQT.FM

Elesa+Ganter CQT.FM Quick-assembly latches with recessed key
Material:
- CQT.FM-AE-V0: glass-fibre reinforced polyamide-based technopolymer (PA), colour black, certified self-extinguishing UL-94 V0.
- CQT.FM-CR: glass-fibre reinforced polyamide-based technopolymer (PA), chrome-plated, glossy finish.
Lever not chrome-plated.
Packing ring: Silicone directly applied onto the back side of the stator head.
Washer with elastic fixing wings and self-tapping screws: Stainless steel.
Key: Polyamide based (PA) technopolymer.
Rotation 90°.
Standard executions
- CQT/A: mark for two-wings key.
- CQT/T: mark for triangular key.
Maximum continuous working temperature:
- CQT.FM-AE-VO = 130°C.
- CQT.FM-CR. = 80°C.

E+G GN 115.1 - GN 115.6

Elesa+Ganter GN 115.1 og GN 115.6 compact mini-latch.
Material: Steel or stainless steel.

E+G Latch VC.308

Elesa+Ganter latch VC.308
Material: Knob High-resilience polypropylene based (PP) technopolymer.
Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Stator and rotor Zamac. Incorporated lock Stainless steel front plate.
Movement of the knob at 90°.
Nut: Brass.
Spring washer: Zinc-plated steel.
Positioning washer: Zinc-plated steel, thickness 1.2 mm to be welded to the sheet of the door in case of thin thickness.
Closing lever: Zinc-plated steel.
Two keys: Nickel-plated brass, removable in two positions at 180° (locked and unlocked position).
Standard executions available
- D: opening to the right side
- S: opening to the left side
- VC.: lock with 400 different combinations. Each lock has a key with different combination.
- VC.U: lock with one combination. All locks have a key with the same combination.
- VC.M: lock with 160 different combinations and master-key. Each lock has a different combination and a key with different combination. Two master-keys, which open all of them, are supplied for every purchase order.
- VC.SS: without lock. The knob can be used for opening to the right or to the left side without distinction.

E+G Latch VC.309

Elesa+Ganter VC.309 Latch-type knobs with lock.
Material, knob: High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Stator and rotor Zamac. Incorporated lock Stainless steel front plate.
Movement of the knob at 90°.
Nut: Brass.
Spring washer: Zinc-plated steel.
Positioning washer: Zinc-plated steel, thickness 1.2 mm to be welded to the sheet of the door in case of thin thickness.
Closing lever: Zinc-plated steel.
Two keys: Nickel-plated brass, removable in two positions at 180° (locked and unlocked position).
Standard executions available:
- D: opening to the right side
- S: opening to the left side
- VC.: lock with 400 different combinations. Each lock has a key with different combination.
- VC.U: lock with one combination. All locks have a key with the same combination.
- VC.M: lock with 160 different combinations and master-key. Each lock has a different combination and a key with different combination. Two master-keys, which open all of them, are supplied for every purchase order.
- VC.SS: without lock. The knob can be used for opening to the right or to the left side without distinction.

E+G Reprogrammable lock CS-RPR

Elesa+Ganter CS-RPR reprogrammable lock tatches
Lock: With opposing blades and double track key with internal profile, not supplied.
9.791 different combinations.
Stator: Glossy chrome-plated zinc alloy.
Rotor: Chrome-plated zinc alloy with drill-proof hardened steel plate and stainless steel front plate.
Nut: Brass (M19x1).
Internal toothed rings: Zinc-plated steel (the big one), steel (the small one).
Closing lever: Zinc-plated steel, thickness 2.5 mm.
Screw: Zinc-plated steel (only for executions CS-RPR.32-30 and CS-RPR.36-35).
Rotation 180°, with key removable in two positions.
Keys (to be ordered separately):
Programming key: brass.
Normal use key: nickel silver.
- KCR-05: kit with 1 programming key and 5 normal use key.
- KCR-10: kit with 1 programming key and 10 normal use key.
- KCR-01: kit with 25 normal use key.
KCR kit keys is not included in the supply of CS/RPR lock. To be ordered separately.

E+G Latch CS

Elesa+Ganter latch CS.
Stator: Brass-plated zinc alloy.
Rotor: Chrome-plated zinc alloy.
Front plate: Stainless steel.
Nut: Brass (M19x1).
Flat spring washer: Zinc-plated steel.
Closing lever: Zinc-plated steel, 2.5 mm thickness.
Assembly by means of hexagonal nut M6x0.75 (l1=13 and 16 mm), with screw M5x5 (l1=20 mm) or with screw M5x8 (l1=25 and 30 mm).
Two keys: Nickel-plated brass, removable in two positions at 180°.
Rotation 180°.
Standard executions available:
- CS.: lock with 400 different combinations. Each lock has a key with different combination.
- CSU.: lock with one combination. All locks have a key with the same combination.

E+G Latch CSMT/CSMTU

Elesa+Ganter CSMT/CSMTU Latch.
Handle and stator: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Rotor: Chrome-plated zinc alloy.
Front plate: Stainless steel.
Nut: Technopolymer (M22x1.5).
Flat closing lever: Zinc-plated steel, thickness 3 mm.
Retaining washer: NBR rubber.
Self-tapping screw: Zinc-plated steel.
Two keys: Nickel-plated brass, removable in two positions at 180°.
Rotation 90° right.
Standard executions available:
- CSMT.: lock with 400 different combinations. Each lock has a key with different combination.
- CSMTU.: lock with one combination. All locks have a key with the same combination.

E+G CSMTA Latch

Elesa+Ganter CSMT-A latch-type handles with lock and anti-rotation device
Handle and stator: Glass reinforced polyamide based (PA) technopolymer, black colour, RAL 3020 red colour mobile part. Resistant to solvents, oils, greases and other chemical agents.
Rotor: Zinc alloy with chrome plating superficial treatment.
Springs/Front plate: Stainless steel.
Nut: Technopolymer (M22x1.5).
Flat closing lever: Zinc-plated steel, thickness 3 mm.
Retaining washer: NBR rubber.
Self-tapping screw: Zinc-plated steel.
Two keys: Nickel-plated brass, removable in two positions at 180°.
Rotation 90° right.
Standard executions available:
- CSMT-A: lock with 400 different combinations. Each lock has a two keys with different combination.
- CSMTU-A: lock with one combination. All locks have two keys with the same combination.

E+G CSMTA Latch

Elesa-Ganter CSMT-A latch-type handles with lock and anti-rotation device
Handle and stator: Glass reinforced polyamide based (PA) technopolymer, black colour, RAL 3020 red colour mobile part. Resistant to solvents, oils, greases and other chemical agents.
Rotor: Zinc alloy with chrome plating superficial treatment.
Springs/Front plate: Stainless steel.
Nut: Technopolymer (M22x1.5).
Flat closing lever: Zinc-plated steel, thickness 3 mm.
Retaining washer: NBR rubber.
Self-tapping screw: Zinc-plated steel.
Two keys: Nickel-plated brass, removable in two positions at 180°.
Rotation 90° right.
Standard executions available:
- CSMT-A: lock with 400 different combinations. Each lock has a two keys with different combination.
- CSMTU-A: lock with one combination. All locks have two keys with the same combination.

E+G Latch CS/M

Elesa+Ganter CS/M latch
Handle and stator: Glossy chrome-plated zinc alloy.
Rotor: Chrome-plated zinc alloy.
Front plate: Stainless steel.
Nut: Brass (M22x1.5).
Spring washer: Black-oxide steel.
Washer: Zinc-plated steel.
Closing levers: Zinc-plated steel flat and two-point closing lever, thickness 3 mm.
Screw: Zinc-plated steel (M7x10).
Two keys: Nickel-plated brass, removable in two positions at 180°.
Rotation 90° right.
Standard executions available:
- CSM.: lock with 400 different combinations. Each lock has a key with different combination.
- CSMU.: lock with one combination. All locks have a key with the same combination.

E+G Latch CX

Elesa+Ganter CX latch lock with opposing blades and double track key with internal profile.
Stator: Glossy chrome-plated zinc alloy.
Rotor: Chrome-plated zinc alloy with drill-proof hardened steel plate and stainless steel front plate.
Nut: Brass (M19x1).
Spring washer: Zinc-plated steel.
Closing lever: Zinc-plated steel, thickness 2.5 mm.
Screw: Zinc-plated steel (M5x5).
Two reversible keys: Nickel-plated brass, removable in two positions at 180°.
Rotation 180°.
IP 65 protection class, according to IEC 529 table.
Standard executions available:
- CX.: lock with 15,660 different combinations. Each lock has a key with different combination.
- CXU.: lock with one combination. All locks have a key with the same combination.

E+G Latch CL+C

Elesa+Ganter CL+C  latches with handle and rod control for cabinets
Handle: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Base: Nickel-plated zamac with two NBR synthetic rubber O-ring.
Handle shank: Chrome-plated zinc alloy with NBR synthetic rubber O-ring.
Rod control: Chrome-plated zinc alloy.
European style stator
- CLC-EU: lock with different combinations. Each lock has two nickel-plated brass keys, with different combination, removable at 180°.
- CLCU-EU: lock with one combination. All locks have two nickel-plated brass keys, with the same combination, removable at 180°.
- CLCA-EU: lock for technopolymer key with zamac insert, with two-wings key mark.

E+G Latch CLT

Elesa+Ganter CLT Latches with handle for rod controls
Handle and base: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Handle shank: Zinc alloy with superficial chromate treatment and NBR synthetic rubber O-ring.
Sealing washer: Silicon directly applied under the handle base and NBR synthetic rubber O-ring (only for execution IP 65).
Screws: Zinc-plated steel.
Standard executions available:
- CLT.: lock with different combinations. Each lock has two nickel-plated brass keys, with different combination, removable at 180°.
- CLT-EU: lock with different combinations with European stator. Each lock has two nickel-plated brass keys, with different combination, removable at 180°.
- CLTU.: lock with one combination. All locks have two nickel-plated brass keys, with the same combination, removable at 180°.
- CLTU-EU: lock with one combination with European stator. All locks have two nickel-plated brass keys, with the same combination, removable at 180°.
- CLTA.: lock for technopolymer key with zamac insert, with two-wings key mark, included in the supply.
- CLTA-EU: lock with European stator, for technopolymer key with zamac insert, with two-wings key mark, included in the supply.

E+G GN 123 Puncher

Elesa+Ganter GN 123 Sheet metal puncher
Punch and die hardened steel (56÷58 HRC).
Axial ball bearing Hexagon nut: Black-oxide and hardened steel.
Pull and guide bolt: Hardened steel.
Locking nut: Steel.
These sheet metal punches GN 123 allow the operator to punch in a simple way fixing holes in sheet metal doors for locks of the types GN 115, GN 115-NI, GN 115-SC, GN 115.1 and GN 119.

E+G Locking bolt CKE

Elesa+Ganter CKE Locking bolt
Body: Glass-fibre reinforced polyamide based (PA) technopolymer with security anti-intrusion-profiled slot. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Closing button: Techopolymer, red colour.
Closing lever: AISI 304 stainless steel.
- CKE.40 CH: Assembly through holes for M5 cylindrical-head screws.
- CKE.40 B: Assembly through brass bosses, tapped blind holes. Key (to order separately)
- CSN (code 6951): acetal resin based (POM) technopolymer fold-away key, red colour, anti-intrusion-profiled stainless steel insert.
- CSF (code 6952): polyamide based (PA) technopolymer ball key, red colour, anti-intrusion-profiled stainless steel insert.

E+G BPS door lock

Elesa+Ganter BPS ball-shaped door lock is made from glass-fibre reinforced polyamide technopolymer in an black matte finish. It consists of a clamp to be fixed to a frame and a ball to be fixed to a door.
The clamp, in which the ball fixet to the closing door is inserted, is a menacial stop devicce also to the door movement, thanks to its shape. Itcan  be used with both shutter doors and sliding doors, and is resistant to solvents, oils, greases and other chemical agents.

E+G Handle with lock EBR

Elesa+Ganter EBR handle for doors with safety lock
Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Grey-black, matte finish.
Locking pin: AISI 304 stainless steel with technopolymer push button, cylindrical walls in red colour.
Key retention device AISI 316 stainless steel ball and spring.
Caps Technopolymer in Ergostyle colours, matte finish.
Supplied not assembled, press-fit assembly, removable by a screwdriver.
Standard execution: Pass-through assembly holes for cylindrical head screws with hexagon socket. Anti-intrusion profiled security key (to order separately)
- CSN (code 6951): acetal resin based (POM) technopolymer fold-away key, red colour, stainless steel insert.
- CSF (code 6952): polyamide based (PA) technopolymer ball key, red colour, stainless steel insert.
- CSL (code 6953): acetal resin based (POM) technopolymer size increased fold-away key, red colour, stainless steel insert.

E+G GN 120 Protective cap

Elesa+Ganter GN 120 Protective caps
Material: Plastic Technolpolymer (Polyethylen).
Colour: Black.
Protective caps GN 120 are usable for the following locks:
- Locks GN 115 (Steel, stainless steel).
- Mini-Locks GN 115.1.
- Door locks GN 119 (Steel). -
Door locks GN 119-NI (Stainless steel).

E+G GN 315 snap lock

Elesa+Ganter GN 315 snap locks
Lock housing: Zinc pressure die-cast, corrosion-resistant ZNDG Pass. Nano®-coating , anthracite coloured.
Locating ring: Additionally epoxy resin coating. RAL 9005 black, matte finish.
Slide: Polyamide based (PA) technopolymer, plastic, black matte finish.
Push button: Polyamide based (PA) technopolymer, plastic, light grey.
Hexagon nut: Zinc-plated steel.

E+G GN 315.1 snap lock

Elesa+Ganter GN 315.1 snap locks
Lock housing: Zinc pressure die-cast, corrosion-resistant ZNDG Pass. Nano®-coating , anthracite coloured.
Locating ring: Additionally epoxy resin coating. RAL 9005 black, matte finish.
Slide: Polyamide based (PA) technopolymer, plastic, black matte finish.
Push button: Polyamide based (PA) technopolymer, plastic, light grey.
Hexagon nut: Zinc-plated steel.

E+G BMS door lock

Elesa+Ganter BMS snap door lock.
Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Spring: Stainless steel.
Standard executions:
- BMS: snap lock and unlock. It consists of a return spring and a fixing plate. It is used for pull opening of doors by means of a handle.
- BMS.L: snap lock and lever for manual release. It consists of a return spring for manual operation and a fixing plate. It is used for pull opening of doors through the use of the release lever which also represents the handle grip. When the lever is locked, the maximum load at breakage of the door lock is = 2500 N.

E+G GN 720 Stop lock

Elesa+Ganter GN 720 Stop locks
Latch: Zinc alloy die-cast.
Latch colour:
- Version SW: RAL 9005 black, matte finish, epoxy resin coating.
- Version SR: RAL 9006 silver, matte finish, epoxy resin coating.
Indexing mechanism: Stainless Steel.
Countersunk screw DIN 7991 Stainless Steel A2.
Mounting with countersunk screw

E+G PR-CH handle with lock

Elesa+Ganter PR-CH Flush pull handles snap-in assembly.
Glass-fibre reinforced polyamide based (PA) technopolymer.
Resistant to solvents, oils, greases and other chemical agents.
Black colour, matte finish.
Type:
D: lock placed on the right.
S: lock placed on the left.
K: lock with key removable in to position, rotation by 90°
QE: electrical panel lock type with st. steel screw and washer.
Only for K execution:
F: different combination (400 combinations).
U: samm combination (all lock opnede with samm key).
M: differnt combination with master-key (160 combinations).
Only for QE execution:
T: lock with triangular groove.
Q: lock with square groove.

E+G GN 119.2 key

Elesa-Ganter GN 119.2 key
Material: Zinc die-casting, epoxy resin coating, RAL 9005 black.
Standard versions:
- Type VDE5: Operation with double bit d2 = 5.
- Type DK6,5: Operation with triangle h = 6.5.
- Type DK7: Operation with triangle h = 7.
- Type SCH: Operation with blade / slot.
- Type VK 6: Operation with square A/F6.
- Type VK7: Operation with square A/F7.
- Type VK8: Operation with square A/F8.

E+G CQTF.FM-AE-V0 lock

Elesa-Ganter CQTF.FM-AE-V0 Latches with recessed key for quick-assembly
Material: Glass-fibre reinforced polyamide-based technopolymer (PA), black colour, certified self-extinguishing UL-94 V0.
Packing ring: Silicone directly applied onto the back side of the stator head.
Washer with elastic fixing wings and self-tapping screw: Stainless steel.
Key: Polyamide based (PA) technopolymer.
Rotation 90°.
IP protection: IP 65 protection class according to IEC 529 table.
Standard executions:
- CQTF/A: two-wing groove for key.
- CQTF/T: triangular groove for key.
Maximum continuous working temperature: 130°C.

E+G CQTL.FM lock

Elesa-Ganter CQTL.FM lock with handle and recessed key for quick-assembly
Material: Glass-fibre reinforced polyamide-based technopolymer (PA), black colour.
Packing ring: Silicon directly applied onto the back side of the stator head.
Washer with elastic fixing wings and self-tapping screw: Stainless steel.
Key: Polyamide based (PA) technopolymer.
Rotation 90°.
IP protection: IP 65 protection class according to IEC 529 table.
Standardexecutions:
- CQTL/A: two-wing groove for key.
- CQTL/T: triangular groove for key.
Maximum continuous working temperature 130°C.

E+G CSL.FM lock

Elesa-Ganter CSL.FM Latch with handle and lock
Stator: Glass-fibre reinforced polyamide based (PA) technopolymer, black colour.
Front plate: Stainless steel.
Closing lever: Zinc-plated steel, 2.5 mm thickness.
Rotation 180°.
IP 65 protection class according to IEC 529.
Standard executions:
- CSL.: Lock with 400 different combinations. Each lock has a couple of keys with different combination.
- CSLU.: Lock with 1 combination. All locks have the same combination and can be opened with the same key.

E+G GN 115-SC latch with key

Elesa-Ganter GN 115-SC Latch with key
Lock housing: Chromium-plated zinc-pressure die cast.
Metal elements: Zinc-plated steel, blue passivated.
Standard executions available:
- Version SC: Operation with key (same lock).
- Version SU: Operation with key (different lock).
- Version SCK: Operation with wrench (same lock).
- Version SUK: Operation with wrench (different lock).
- Version SCT: Operation with mit T-Handle (same lock).
- Version SUT: Operation with T-handle (different lock).
- Version LCG: Operation with lever handle (same lock).
- Version LUG: Operation with lever handle (different lock).

E+G ELCK latch type lever with lock

Elesa-Ganter ELCK Latch-type lever with lock
Lever: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Grey-black, matte finish.
Lock:
- Die-cast zinc alloy stator and rotor;
- lock with stainless steel front plate, movement of the lever at 90°;
- brass locking nut;
- zinc-plated steel spring washer;
- zinc-plated steel positioning washer, thickness 1.2 mm to be welded to the sheet of the door in case of thin thickness;
- two nickel-plated brass keys, removable in two positions (locked or unlocked position).
Standardexecutions:
Lock with 400 different combinations. Each lock has a key with different combination.
- ELCK-1-D: with zinc-plated steel flat closing lever, opening on the right side.
- ELCK-1-S: with zinc-plated steel flat closing lever, opening on the left side.
- ELCK-1-SS: with zinc-plated steel flat closing lever (1), without lock.
Therefore, the control lever can be used for opening both on the right or on the left side.
- ELCK-2: available in all the above mentioned executions but with folded closing lever.

E+G CSM latch lever with lock

Elesa-Ganter CSM latch-type handles with lock
Handle: Glossy chrome-plated zinc alloy.
Front plate: Stainless steel.
Nut: Brass (M22x1.5).
Spring washer: Black-oxide steel.
Rotation 90° right.
Standard executions available:
- CSM.: lock with 400 different combinations. Each lock has a key with different combination.
- CSMU.: lock with 1 combination. All locks have a key with the same combination.

E+G CAR. rod control

Elesa-Ganter CAR. Rod controls
Material
- CAR-M:nickel-plated zinc alloy.
- CAR-TP: glass-fibre reinforced polyamide based (PA)technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Toothed wheel: Zinc alloy with superficial chromate treatment.

E+G LPR levers

Elesa-Ganter LPR levers for PR-CH flush pull handles
Standard executions
- LPR: zinc-plated steel lever.
- LPR-SST: AISI 304 stainless steel lever.

E+G ESC lock with handle

Elesa-Ganter ESC Door lock handles with/without built-in lock
Handle: Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
Acetal resin based (POM) technopolymer retention wings.
Resistant to solvents, oils, greases and other chemical agents.
Closing lever: Zinc-plated steel, thickness 2 mm.
Standard exeutions:
- BM: back mounting.
- FM: front mointing.
- K: with lock.
- SS: without lock.
Only for K exeutions:
- 90: lock with key (100 combinations) removable in the closing position, rotation by 90°.
- 180: lock with key (200 combinations) removable in tow positions at 180°, rotation by 180°.
- F: different combination.
- U: same combination (all locks can be opened with the same key).

E+G GN 702 Stop locks

Elesa-Ganter GN 702 stop locks

Latch: Zinc alloy die-cast.
Latch colour:
- Version SW: RAL 9005 black, matte finish, epoxy resin coating.
- Version RS: RAL 3000 red, matte finish, epoxy resin coating.

Fastening flange: Zinc alloy die-cast, black, RAL 9005, matte finish, epoxy resin coating.

Indexing mechanism:
- Steel / Plastic, Steel parts zinc plated, blue passivated (type A and B).
- Zinc alloy die cast / Plastic (type C).

Standard versions available:
- Type A: with flange for surface mounting.
- Type B: with female thread.
- Type C: with male thread.

E+G GN 516 rotary clamping latch

Elesa-Ganter GN 516 Rotary clamping latch

Lock housing: Zinc alloy die-cast.
Locating ring: Zinc alloy die-cast, epoxy resin coating RAL 9005 black matte finish.
Latch: Zinc-plated steel, blue passivated.
Knob, Wrench, Lever: Polyamide based (PA), black, matte finish.

Accessories: Key GN 119.2

Standard versions available
- Type DK: Operation with triangular spindle (DK7).
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type VDE: Operation with double bit.
- Type RG: Operation with knurled knob GN 7336.
- Type KG: Operation with wrench.
- Type HG: Operation with lever.

E+G GN 516.1 locks

Elesa-Ganter GN 516.1 Rotary clamping latch

Lock housing: Zinc alloy die-cast.
Locating: Zinc alloy die-cast, epoxy resin coating RAL 9005 black matte finish.
Latch: Zinc alloy die cast.
Knob, wrench, lever: Polyamide based (PA), black, matte finish.
Cover cap: Polyamide based (PA), light grey, matte finish.
Standard versions:
- Type DK: Operation with triangular spindle (DK7).
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type VDE: Operation with double bit.
- Type RG: Operation with knurled knob GN 7336.
- Type KG: Operation with wrench.
- Type HG: Operation with lever.

E+G GN 320 locks

Elesa-Ganter GN 320 Opening handles

Material: Polyamide based (PA) technopolymer.
Colour: Black, matte finish.

Opening handles GN 320 are suitable for locks, GN 115, GN 119 and GN 315.1.

E+G GN 516.5 lock

Elesa-Ganter GN 516.5 Rotary clamping latches

Lock housing: AISI 316 stainless steel.
Locking mechanism/bolt: AISI 316 stainless steel.
Latch: AISI 304 stainless steel.
Cover cap: Polyamide based (PA) light grey, matte.

Standard versions available:
- Type VK8: Operation with square spindle A/F8.
- Type SCH: Operation with slot.
- Type VDE: Operation with double bit (VDE5).
- Type RG: Operation with knurled knob GN 7336.
- Type KG: Operation with wrench.
- Type HG: Operatin with lever.

Accessories on requst: Key GN 119.2

E+G GN 115.7 lock

Elesa-Ganter GN 115.7 Latch with handle

Handle: Zinc alloy die-cast.

Finish
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version SR: RAL 9006 silver colour, matte finish, epoxy resin coating.

Metal parts: Zinc-plated steel, blue passivated.

Standard versions available
- Type DK: Operation with triangular spindle (DK7).
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type SCH: Operation with slot.
- Type VDE: Operation with double bit.

Accessories on request: Key GN 119.2.

E+G GN 119.3 lock

Elesa-Ganter GN 119.3 Latch with handle

Handle: Zinc alloy die-cast.
- Version SW: RAL 9005 black colour, matte finish epoxy resin coating.
- Version SR: RAL 9006 silver colour, matte finish, epoxy resin coating.

Cam: Sheet steel zinc-plated, blue passivated.
Distance piece: Aluminium
Other parts: Zinc-plated steel, blue passivated.

Standard versions available
- Type DK: Operation with triangular spindle (DK7).
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type VDE: Operation with double bit.

Accessories on request: Key GN 119.2.

E+G GN 115.8 latch for key

Elesa-Ganter GN 115.8 for hook and key

Lock housing versions: Zinc alloy die-cast.
Locating ring
- Chromium-plated CR
- RAL 9005 black colour SW, matte finish, epoxy resin coating.

Metal elements: Zinc-plated steel, blue passivated.
Key: Nickel silver with plastic hand piece.
Wrench / T-Handle: Plastic (Polyamide PA), black matte.

Standard versions available
- Type SC: Operation with key (same lock).
- Type SU: Operation with key (different lock).
- Type SCK: Operation with wrench (same lock).
- Type SUK: Operation with wrench (different lock).
- Type SCT: Operation with T-Handle (same lock).
- Type SUT: Operation with T-Handle (different lock).

Identification no.
- Identification no. 1 without latch bracket
- Identificaiton no. 2 with latch bracket

E+G GN 115.8 with knobs

Elesa-Ganter GN 115.8 with clamping knob

Locating ring
- Chromium-plated CR
- RAL 9005 black colour SW, matte finish, epoxy resin coating.

Metal elements: Zinc-plated steel, blue passivated.
Handle: Plastic (Polyamide PA), black matt.
Cover cap (type RG, KG, HG): light grey

Standard versions available
- Type SG: Operation with star knob.
- Type SK: Operation with wrench.
- Type ST: Operation with T-Handle.
- Type RG: with knurled knob (GN 7336).
- Type KG: Operation with wrench.
- Type HG: Operation with Lever.

Identification no.
- Identification no. 1 without latch bracket
- Identification no. 2 with latch bracket

E+G GN 115.8 for speciel keys

Elesa-Ganter GN 115.8 for speciel keys
Lock housing: Zinc alloy die-cast.
Locating ring
- Chromium-plated CR
- RAL 9005 black colour SW, textured finish, epoxy resin coating.
All other parts: Zinc plated steel, blue passivated.
- Type DK: Operation with triangular spindle (DK7).
- Type VK7: Operation with square spindle A/F7.
- Type VK8: Operation with square spindle A/F8.
- Type SCH: Operation with slot.
- Type VDE: Operation with double bit (VDE5).
Identification no.
- Identification no. 1 without latch bracket
- Identification no. 2 with latch bracket

E+G GN 115.10 for speciel keys

Elesa-Ganter GN 115.10 for speciel keys

Type
- Type DK: Operation with triangular spindle (DK7)
- Type VK7: Operation with square spindle A/F7
- Type VK8: Operation with square spindle A/F8
- Type SCH: Operation with slot
- Type VDE: Operation with double bit

Identification no.
- Version 1: Operation in standard mounting position, at the top left
- Version 2: Operation in standard mounting position, at the top right

Front frame: Zinc die casting, plastic coated
black, RAL 9005, textured finish SW
silver, RAL 9006, textured finish SR

Tray: Plastic
- black grey (for SW)
- light grey (for SR)

Operating part: Zinc die casting
- plastic coated, black (for SW)
- chrome-plated (for SR)

Other parts: Steel, zinc plated, blue passivated

E+G GN 115.10 with keys

Elesa-Ganter GN 115.10 with keys

Type
- Type SC: Operation with key (same lock)
- Type SU: Operation with with key (different lock

Identification no.
- Version 1: Operation in standard mounting position, at the top left
- Version 2: Operation in standard mounting position, at the top right

Front frame: Zinc die casting, plastic coated in black, RAL 9005, textured finish SW, or in silver colour, RAL 9006, textured finish SR
Tray: Plastic in black grey (for SW) or light grey (for SR)
Key: Nickel silver with plastic hand piece
Other parts: Steel, zinc plated, blue passivated

E+G GN 4490 Ball catches

Elesa+Ganter GN 4490 Ball catches

Ball catches GN 4490 are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily.
They consist of a ball housing and a retaining element that engages in the ball housing from the side or front.
The installation orientation can be chosen as desired.
Beyond the typical uses, these solid and attractively designed ball catches are also utilized in technical environments.
For example, thanks to the centered 90° countersunk holes, they can also be used with profile systems.

Material:
- Zinc die casting ZD
- plastic coated
- black, RAL 9005, textured finish SW
- silver, RAL 9006, textured finish SR

Ball
- Stainless Steel A2

Spring
- Stainless Steel AISI 301

Ball guide
- Plastic

E+G GN 115-VH8 Hygienic lock

E+G GN 115-VH8 Hygienic lock

(0)

E+G GN 115 Lock

E+G GN 115 Lock

(205)

E+G GN 115-NI st. steel

E+G GN 115-NI st. steel

(40)

E+G Latch CMT. AE-VO

E+G Latch CMT. AE-VO

(4)

E+G Latch CM

E+G Latch CM

(2)

E+G Latch CM/L

E+G Latch CM/L

(2)

E+G GN 119 & GN 119-Ni

E+G GN 119 & GN 119-Ni

(72)

E+G GN 117 door lock

E+G GN 117 door lock

(211)

E+G Latch VCK

E+G Latch VCK

(38)

E+G Security Latch BOCK., BOCK. INOX

E+G Security Latch BOCK., BOCK. INOX

(10)

E+G GN 218 cam latch

E+G GN 218 cam latch

(8)

E+G GN 116.1 door lock

E+G GN 116.1 door lock

(30)

E+G Latch CQT. AE-VO

E+G Latch CQT. AE-VO

(8)

E+G Latch CQ

E+G Latch CQ

(14)

E+G Latch CQ. INOX

E+G Latch CQ. INOX

(4)

E+G Latch CQT.FM

E+G Latch CQT.FM

(18)

E+G GN 115.1 - GN 115.6

E+G GN 115.1 - GN 115.6

(24)

E+G Latch VC.308

E+G Latch VC.308

(7)

E+G Latch VC.309

E+G Latch VC.309

(7)

E+G Reprogrammable lock CS-RPR

E+G Reprogrammable lock CS-RPR

(9)

E+G Latch CS

E+G Latch CS

(20)

E+G Latch CSMT/CSMTU

E+G Latch CSMT/CSMTU

(2)

E+G CSMTA Latch

E+G CSMTA Latch

(2)

E+G CSMTA Latch

E+G CSMTA Latch

(2)

E+G Latch CS/M

E+G Latch CS/M

(2)

E+G Latch CX

E+G Latch CX

(12)

E+G Latch CL+C

E+G Latch CL+C

(6)

E+G Latch CLT

E+G Latch CLT

(12)

E+G GN 123 Puncher

E+G GN 123 Puncher

(2)

E+G Locking bolt CKE

E+G Locking bolt CKE

(2)

E+G BPS door lock

E+G BPS door lock

(4)

E+G Handle with lock EBR

E+G Handle with lock EBR

(6)

E+G GN 120 Protective cap

E+G GN 120 Protective cap

(2)

E+G GN 315 snap lock

E+G GN 315 snap lock

(2)

E+G GN 315.1 snap lock

E+G GN 315.1 snap lock

(2)

E+G BMS door lock

E+G BMS door lock

(2)

E+G GN 720 Stop lock

E+G GN 720 Stop lock

(4)

E+G PR-CH handle with lock

E+G PR-CH handle with lock

(10)

E+G GN 119.2 key

E+G GN 119.2 key

(0)

E+G CQTF.FM-AE-V0 lock

E+G CQTF.FM-AE-V0 lock

(0)

E+G CQTL.FM lock

E+G CQTL.FM lock

(0)

E+G CSL.FM lock

E+G CSL.FM lock

(0)

E+G GN 115-SC latch with key

E+G GN 115-SC latch with key

(0)

E+G ELCK latch type lever with lock

E+G ELCK latch type lever with lock

(0)

E+G CSM latch lever with lock

E+G CSM latch lever with lock

(0)

E+G CAR. rod control

E+G CAR. rod control

(0)

E+G LPR levers

E+G LPR levers

(0)

E+G ESC lock with handle

E+G ESC lock with handle

(0)

E+G GN 702 Stop locks

E+G GN 702 Stop locks

(0)

E+G GN 516 rotary clamping latch

E+G GN 516 rotary clamping latch

(0)

E+G GN 516.1 locks

E+G GN 516.1 locks

(0)

E+G GN 320 locks

E+G GN 320 locks

(0)

E+G GN 516.5 lock

E+G GN 516.5 lock

(0)

E+G GN 115.7 lock

E+G GN 115.7 lock

(0)

E+G GN 119.3 lock

E+G GN 119.3 lock

(0)

E+G GN 115.8 latch for key

E+G GN 115.8 latch for key

(0)

E+G GN 115.8 with knobs

E+G GN 115.8 with knobs

(0)

E+G GN 115.8 for speciel keys

E+G GN 115.8 for speciel keys

(1)

E+G GN 115.10 for speciel keys

E+G GN 115.10 for speciel keys

(0)

E+G GN 115.10 with keys

E+G GN 115.10 with keys

(0)

E+G GN 4490 Ball catches

E+G GN 4490 Ball catches

(16)

Close

Share site

Please fill in the form below with your details. Fields marked with must be completed

Share site

Thank you for sharing this page. Your friend will shortly receive an email.
Close

Newsletter

Subscribe

Close

Send us an email

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Call me request

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Log in

Please fill in the form with your username and password to log in at Brd. Klee



Have you forgotten your password?
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • Own profile with own lot number, reordering and favourites
  • 24 hours service
Close

Lost Password

Please give us your email, and we will send you instructions on how to reset your password to your mail.


Recover password
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • My profile with own lot number, reordering and favorites
  • 24 hours emergency service
Close

Create profile

Please fill in the form below with your request. Fields marked with must be completed




Close

Complete

There is now sent a request for inclusion in our customer base.

If your company is recognized for the terms you will within 24 hours receive an email with your password.

Welcome to Brd. Klee

Close