E+G Levelling Elements

E + G GN 20 Levelling foot

GN 20 levelling feet with mounting holes are intended for use in hygiene areas. The bottom seal protects the area beneath the foot plate from
dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings and the correct position of
the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball
seal, the moving components are sealed against the environment. The high quality finish prevents adherence of dirt and facilitates cleaning.

The values listed in the table (datasheet) for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.

RoHS compliant

E+G GN 1580 Hygienic Screw

 

E+G GN 1580 Hygienic Nut

 

E+G Base and Threaded stem

Build your own Levelling.

Select foot and screw in desired size and combine themselves.

E+G GN 30 levelling foot

Ganter Levelling feet GN 30

(ex GN 340)
Technical informations
Type (Base plate)
- Type A1: Steel, zinc plated, rubber, inlaid black
- Type A2: Steel, zinc plated, rubber, inlaid White
Version of the threaded stem
- Version S: without nut, External hexagon at the bottom
- Version SK: with nut, External hexagon at the bottom
- Version U: without nut,Hexagon socket at the top, Wrench flat at the bottom
- Version UK: with nut, Hexagon socket at the top, Wrench flat at the bottom
- Version X: with female thread, External hexagon
Base plate, sheet metal
Steel, zinc plated, blue passivated
Threaded stem
Steel, zinc plated, blue passivated
SpecificationHexagon nut ISO 4302
Steel, zinc plated, blue passivated
Rubber underlay, inlaid
- black: (NBR)80±5 Shore A
- white: (NBR)80±5 Shore A

E+G GN 31 levelling foot

Ganter levelling foot GN 31
(EX. GN 341 GN 341.1 GN 341.2 GN 340.5)
ST. Steel-levelling feet.
technical informations
Type (Base plate)
- Type B1: matt shot-blasted, rubber, inlaid, black
- Type B2: matt shot-blasted, rubber, inlaid, white
- Type B3: matt shot-blasted, rubber, vulcanised, black
- Type B4: matt shot-blasted, rubber, vulcanised, white
- Type C3: polished, rubber, vulcanised, black
- Type C4: polished, rubber, vulcanised, white
SpecificationVersion of the threaded stem
- Version S: without nut, External hexagon at the bottom
- Version SK: with nut, External hexagon at the bottom
- Version T: without nut, Wrench flat at the bottom, "not dipping" version
- Version TK: with nut, Wrench flat at the bottom, "not dipping" version
- Version U: without nut, Hexagon socket at the top, Wrench flat at the bottom
- Version UK: with nut, Hexagon socket at the top, Wrench flat at the bottom
- Version V: without nut, External hexagon at the top, Wrench flat at the bottom
- Version VK: with nut, External hexagon at the top, Wrench flat at the bottom
- Version W: with adjustable sleeve, Hygienic Version, Wrench flat at the bottom
- Version X: with female thread, External hexagon
Base plate, sheet metal
Stainless Steel AISI 304
Threaded stem
Stainless Steel AISI 303
Hexagon nut ISO 4302
Stainless Steel AISI 304
Rubber underlay, inlaid
- black: Perbunan® (NBR)80±5 Shore A
- white: Perbunan® (NBR)80±5 Shore A
Rubber underlay, vulcanised
- black: Perbunan® (NBR)80±5 Shore A
- white: Perbunan® (NBR)80±5 Shore A

E+G GN 339 Levelling elements

Elesa+Ganter GN 339 Levelling elements
Material
Version ST: zinc-plated steel (tensile strength 500 N/mm2), blue passivated.
Plastic caps
- Version KS: technopolymer Polyacetal (POM), white natural colour, gliding.
- Version KR: technopolymer rubber (TPE), 78 Shore A ≈ hardness, black colour, non-gliding.
Hexagon nut
Zinc-plated steel, blue passivated.

E+G GN 343.2

Elesa+Ganter GN 343.2 Levelling elements
Base
Zinc-plated steel, class 5.8 (tensile strength 500 N/mm2), blue passivated.
- Version OS: without plastic cap.
- Version KS: with plastic cap, gliding.
- Version KR: with plastic cap, not-gliding.
- Version KSE: with plastic cap, gliding, electrically conductive (antistatic).
- Version KRE: with plastic cap, not-gliding, electrically conductive (antistatic).
Threaded stem
Zinc-plated steel, blue passivated, supplied assembled.
Hexagon nut
Zinc-plated steel, blue passivated, DIN EN 61340-5-1 / 61340-2-3, supplied assembled.
Specification of KSE / KRE
Surface resistivity: < 106 Ω
Volume resistivity: <107 Ω
DIN EN 61340-5-1 / 61340-2-3

E+G GN 343.6 st. steel

 

E+G GN 342.2 Levelling elements

Elesa+Ganter GN 342.2 Levelling elements Base Zinc-plated steel, class 5.8 (tensile strength 500 N/mm2), blue passivated. - Version OS: without plastic cap. - Version KS: with plastic cap, gliding. - Version KR: with plastic cap, not-gliding. - Version KSE: with plastic cap, gliding, electrically conductive (antistatic). - Version KRE: with plastic cap, not-gliding, electrically conductive (antistatic). Threaded stem Zinc-plated steel, blue passivated, supplied assembled. Hexagon nut Zinc-plated steel, blue passivated, DIN EN 61340-5-1 / 61340-2-3, supplied assembled.

E+G GN 21 Levelling elements

Elesa+Ganter GN 21 Stainless Steel-Levelling feet
Specification
Type (Base plate)
- Type D0: fine turned, without rubber underlay
- Type D1: fine turned, with rubber underlay, inlaid, black
Version
- Version S: without nut, external hexagon at the bottom
- Version SK: with nut, external hexagon at the bottom
- Version T: without nut, wrench flat at the bottom, "not dipping" version
- Version TK: with nut, wrench flat at the bottom, "not dipping" version
- Version U: without nut, hexagon socket at the top, Wrench flat at the bottom
- Version UK: hexagon socket at the top, wrench flat at the bottom
- Version V: without nut, external hexagon at the top, Wrench flat at the bottom
- Version VK: with nut, external hexagon at the top, Wrench flat at the bottom
- Version W: with adjustable sleeve, hygienic version, Wrench flat at the bottom
- Version X: with female thread, external hexagon
Base plate
Stainless Steel AISI 303
Threaded stem
Stainless Steel AISI 303
Hexagon nut ISO 4032
Stainless Steel AISI 304
Rubber underlay, inlaid
Perbunan ®(NBR), 70 Shore A

E+G GN 40 Levelling elements

Elesa+Ganter GN 40 (ex GN 440) Levelling feet
Specification
Type (Base plate)
- Type A0: Steel, zinc plated, without rubber underlay
- Type A1: Steel, zinc plated, rubber clipped on, black
- Type A3: Stainless Steel, blank, rubber vulcanised, black
Version of threaded stem
- Version S: without nut, external hexagon at the bottom
- Version SK: with nut, external hexagon at the bottom
- Version U: without nut, hexagon socket at the top,wrench flat at the bottom
- Version UK: hexagon socket at the top, wrench flat at the bottom
- Version X: with female thread, external hexagon
Base plate
- Type A0 / A1: Steel, zinc plated
- Type A3: Stainless Steel AISI 303
Threaded stem
Steel, zinc plated, blue passivated
Hexagon nut ISO 4032
Steel, zinc plated, blue passivated
Rubber cap, clipped on
black, Santoprene® (TPE)
80≈ Shore A
Rubber underlay, vulcanised
black, Perbunan® (NBR)
70± Shore A

E+G GN 41 Levelling elements

Elesa+Ganter GN 41 (ex GN 440.5) Stainless Steel-Levelling feet
Specification
Type (Base plate)
- Type D0: blank, ground, without rubber underlay
- Type D1: blank, ground, rubber, clipped on, black
- Type D3: blank, ground, rubber vulcanised, black
Version of threaded stem
- Version S: without nut, External hexagon at the bottom
- Version SK: with nut, External hexagon at the bottom
- Version T: without nut, Wrench flat at the bottom, "not dipping" version
- Version TK: with nut, Wrench flat at the bottom, "not dipping" version
- Version U: without nut, Hexagon socket at the top, Wrench flat at the bottom
- Version UK: Hexagon socket at the top, Wrench flat at the bottom
- Version V: without nut, External hexagon at the top, Wrench flat at the bottom
- Version VK: with nut, External hexagon at the top, Wrench flat at the bottom
- Version W: with adjustable sleeve, Wrench flat at the bottom
- Version X: with female thread, External hexagon
Base plate
Stainless Steel AISI 304
Threaded stem
Stainless Steel AISI 303
Hexagon nut ISO 4032
Stainless Steel AISI 304
Rubber cap, clipped on
black, Santoprene ®(TPE)
80 ≈ Shore A
Rubber underlay, vulcanised
black, Perbunan®(NBR)
70 ≈ Shore A

E+G GN 33 Levelling elements

Elesa+Ganter GN 33 (ex GN 340.6) Stainless Steel-Levelling feet
Specification
- Type B1: matt shot-blasted, rubber, inlaid, black
Version of threaded stem
- Version S: without nut, External hexagon at the bottom
- Version SK: with nut, External hexagon at the bottom
- Version T: without nut, Wrench flat at the bottom, "not dipping" version
- Version TK: with nut, Wrench flat at the bottom, "not dipping" version
- Version U: without nut, Hexagon socket at the top, Wrench flat at the bottom
- Version UK: Hexagon socket at the top, Wrench flat at the bottom
- Version V: without nut, External hexagon at the top, Wrench flat at the bottom
- Version VK: with nut, External hexagon at the top, Wrench flat at the bottom
- Version W: with adjustable sleeve, Wrench flat at the bottom
- Version X: with female thread, External hexagon
Base plate / lug, sheet metal
Stainless Steel AISI 304
Threaded stem
Stainless Steel AISI 303
Hexagon nut ISO 4032
Stainless Steel AISI 304
Rubber underlay, inlaid
black, Perbunan ®(NBR) 80±5 Shore A

E+G GN 32 Levelling elements

Elesa+Ganter GN 32 (ex GN 340.1) Levelling feet
Specificaiton
Type (Base plate)
Type A1: Steel, zinc plated, Rubber, inlaid, black
Version of threaded stem
- Version S: without nut, External hexagon at the bottom
- Version SK: with nut, External hexagon at the bottom
- Version U: without nut, Hexagon socket at the top, Wrench flat at the bottom
- Version UK: with nut, Hexagon socket at the top, Wrench flat at the bottom
- Version X: with female thread, External hexagon
Base plate / lug, sheet metal
Steel, zinc plated, blue passivated
Threaded stem
Steel, zinc plated, blue passivated
Hexagon nut ISO 4032
Steel, zinc plated, blue passivated
Rubber underlay, inlaid
black, Perbunan® (NBR)
80±5 Shore A

E+G GN 42 Levelling elements

Elesa+Ganter GN 42 (ex GN 440.1) Levelling feet
Specification
Type
- Type A0: Steel, zinc plated, without rubber underlay
- Type A1: Steel, zinc plated, rubber clipped on, black
- Type D3: Stainless Steel, blank, rubber vulcanised, black
Version of threaded stem
- Version S: without nut, External hexagon at the bottom
- Version SK: with nut, External hexagon at the bottom
- Version U: without nut, Hexagon socket at the top, Wrench flat at the bottom
- Version UK: Hexagon socket at the top, Wrench flat at the bottom
- Version X: with female thread, External hexagon
Base plate
- Type A0 / A1: Steel, zinc plated
- Type D3: Stainless Steel AISI 303
Threaded stem
Steel, zinc plated, blue passivated
Hexagon nut ISO 4032
Steel, zinc plated, blue passivated
Rubber cap, clipped on
black, Santoprene ®(TPE)
80 ≈ Shore A

E+G GN 43 Levelling elements

Elesa+Ganter GN 43 (ex GN 440.6) Stainless Steel-Levelling feet
Specification
Type (Base plate)
- Type D0: blank, ground, without rubber underlay
- Type D1: blank, ground, rubber, clipped on, black
- Type D3: blank, ground, rubber vulcanised, black
Version of threaded stem
- Version S: without nut, External hexagon at the bottom
- Version SK: with nut, External hexagon at the bottom
- Version T: without nut, Wrench flat at the bottom, "not dipping" version
- Version TK: with nut, Wrench flat at the bottom, "not dipping" version
- Version U: without nut, Hexagon socket at the top, Wrench flat at the bottom
- Version UK: Hexagon socket at the top, Wrench flat at the bottom
- Version V: without nut, External hexagon at the top, Wrench flat at the bottom
- Version VK: with nut, External hexagon at the thop, Wrench flat at the bottom
- Version W: with adjustable sleeve, Wrench flat at the bottom
- Version X: with female thread, External hexagon
Base plate
Stainless Steel AISI 304
Threaded stem
Stainless Steel AISI 303
Hexagon nut ISO 4032
Stainless Steel AISI 304
Rubber cap, clipped on
black, Santoprene ®(TPE)
80 ≈ Shore A
Rubber underlay, vulcanised
black, Perbunan®(NBR)
70 ≈ Shore A .

E+G GN 343.1

 

E+G Levelling element LW.A

Elesa+Ganter LW.A vibration-damping levelling elements Base Zinc-plated steel. Vibration-damping disk Natural rubber NR, hardness 80 Shore A, black colour, matte finish. Levelling plate Zinc-plated steel. Packing ring OR in NBR synthetic rubber. Threaded stem Zinc-plated steel, supplied not assembled. Nut and washer Zinc-plated steel.

E+G GN 343.3

Elesa+Ganter GN 343.3 Levelling elements in Zinc-plated steel
Base
Glass-fibre reinforced polyamide-based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and
other chemical agents.
Ball joint
Zinc-plated steel.
No-slip disk
- Execution A: without no-slip disk.
- Execution G: with NBR synthetic rubber, hardness 70 Shore A, no-slip disk, supplied assembled.

E+G GN 343.7 st. steel

Elesa+Ganter GN 343.7 Levelling elements in Stainless steel
Base
Glass-fibre reinforced polyamide-based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and
other chemical agents.
Ball joint
AISI 303 stainless steel.
No-slip disk
- Execution A: without no-slip disk.
- Execution G: with NBR synthetic rubber, hardness 70 Shore A, no-slip disk, supplied assembled.

E+G GN 343.5 st. steel

 

E+G GN 342.1 Levelling elements

Elesa+Ganter GN 342.2 Levelling elements Base Zinc-plated steel, class 5.8 (tensile strength 500 N/mm2), blue passivated. Threaded stem Zinc-plated steel, blue passivated, supplied assembled. Hexagon nut Zinc-plated steel, blue passivated, DIN EN 61340-5-1 / 61340-2-3, supplied assembled.

E+G Round end-caps NDX.T

Elesa+Ganter NDX.T round end-caps Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Boss Brass boss, tapped through hole. M24 nickel-plated brass, tapped through hole.

E+G End-cap ND.Q

Elesa+Ganter ND.Q square end-caps for heavy loads Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Standard execution Nickel-plated brass with threaded pass-through hole. Features They can also bear slipping loads contrariwise.

E+G Square end-caps NDX.Q

Elesa+Ganter NDX.Q square end-caps Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Boss Brass, tapped through hole.

E+G Nut NT

Elesa+Ganter NT. nuts for levelling elements Standard executions - NT: zinc-plated steel. - NT-SST: AISI 304 stainless steel. Conformity UNI 5588 DIN 934. Features and applications AISI 304 stainless steel, with low sulphur contents (less than 0.030%) is particularly resistant to corrosion. NT. nuts are particularly suitable for applications on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.

E+G LV.A-ESD-C bases

Elesa+Ganter LV.A-ESD-C Antistatic bases for levelling elements
• Material
Special conductive glass-fibre reinforced polyamide based (PA)
technopolymer. Resistant to solvents oils, greases and other chemical
agents.
Surface resistivity = 103 Ω (ASTM D257 measuring method).
Volume resistivity = 103 Ωcm (ASTM D257 measuring method).
• Colour
Black, matte finish.
• Bases without no-slip disk
LV.A-ESD-C: without ground mounting.
LV.F-ESD-C: with two holes at 180° for grund mounting.
• Bases with no-slip disk
LV.AS-ESD-C: without ground mounting.
LV.FS-ESD-C: with two holes at 180° for grund mounting.

E+G GN 343.4

 

E+G GN 343.8 st. steel

 

E+G Levelling element LV.A-125-ACV

Elesa+Ganter LV.A-125-ACV Levelling elements for ground mounting
Base
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Threaded zinc-plated steel and regulation hexagon with black-oxide steel retaining ring and zinc-plated steel plain washer.
No-slip disk
NBR synthetic rubber, hardness 90 Shore A.
- LV.A: without no-slip disk.
- LV.A-AS: with no-slip disk, supplied assembled, reinforced with a zinc-plated steel plate and fixed by means of two screws.
Ground mounting
By means of two holes at 180°, covered by breakable plastic diaphragms which can be easily removed by a metal tool. They
avoid all unhealthy deposits of dirt and dust when the ground mounting is not required (see below Assembly Instructions).

E+G Levelling element LV.F-125-ACV

Elesa+Ganter LV.F-125-ACV Levelling elements for ground mounting
Base
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Threaded zinc-plated steel and regulation hexagon with black-oxide steel retaining ring and zinc-plated steel plain washer.
No-slip disk
NBR synthetic rubber, hardness 90 Shore A.
- LV.F: without no-slip disk.
- LV.F-AS: with no-slip disk, supplied assembled, reinforced with a zinc-plated steel plate and fixed by means of two screws.
Ground mounting
By means of two holes at 180°, covered by breakable plastic diaphragms which can be easily removed by a metal tool. They
avoid all unhealthy deposits of dirt and dust when the ground mounting is not required (see below Assembly Instructions).

E+G Levelling element LV.A-125-APS

Elesa+Ganter LV.A-125-APS Levelling elements for ground mounting
Base
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Threaded zinc-plated steel and regulation hexagon with black-oxide steel retaining ring and zinc-plated steel plain washer.
No-slip disk
NBR synthetic rubber, hardness 90 Shore A.
- LV.A: without no-slip disk.
- LV.A-AS: with no-slip disk, supplied assembled, reinforced with a zinc-plated steel plate and fixed by means of two screws.
Ground mounting
By means of two holes at 180°, covered by breakable plastic diaphragms which can be easily removed by a metal tool. They
avoid all unhealthy deposits of dirt and dust when the ground mounting is not required (see below Assembly Instructions).

E+G Levelling element LV.F-125-APS

Elesa+Ganter LV.F-125-APS Levelling elements for ground mounting
Base
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Threaded zinc-plated steel and regulation hexagon with black-oxide steel retaining ring and zinc-plated steel plain washer.
No-slip disk
NBR synthetic rubber, hardness 90 Shore A.
- LV.F: without no-slip disk.
- LV.F-AS: with no-slip disk, supplied assembled, reinforced with a zinc-plated steel plate and fixed by means of two screws.
Ground mounting
By means of two holes at 180°, covered by breakable plastic diaphragms which can be easily removed by a metal tool. They
avoid all unhealthy deposits of dirt and dust when the ground mounting is not required (see below Assembly Instructions).

E+G Levelling element LV.A-ELK

Elesa+Ganter LV.A-ELK Levelling elements
Base
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Articulated stem with built-in regulation knob
Threaded zinc-plated steel stem complete with regulation knob in technopolymer type ELK.
Washer and retaining screw (M4x10)
Black-oxide steel.
No-slip disk
NBR synthetic rubber, hardness 70 Shore A.
- LV.A: without no-slip disk.
- LV.A-AS: with no-slip disk, supplied assembled.

E+G LX Levelling elements

Elesa+Ganter LX Levelling elements
Base
Polyamide based (PA) technopolymer with adjusting hexagon. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Standard executions
- LX: zinc-plated steel threaded stem.
- LX-S: zinc-plated steel threaded stem, base with cross mark for screwdriver.
- LX-SST: AISI 304 stainless steel threaded stem.
- LX-SST-S: AISI 304 stainless steel threaded stem, base with cross mark for screwdriver.

E+G GN 6311.4 Levelling feet

Elesa+Ganter GN 6311.4 Levelling elements

Material:
Base in zinc-plated steel (tensile strength 500 N/mm2), blue passivated.
Plastic caps
- Type KS: technopolymer Polyacetal (POM), white natural colour, gliding.
- Type KR: elastomer (TPE), 78 Shore A ≈, black colour.

Versions
- Vesion OS: without plastic cap.
- Verison KS: with plastic cap, gliding.
- Version KR: with plastic cap, non-gliding.

E+G GN 23 Levelling elements

 

E+G GN 349 End-caps

Elesa+Ganter GN 349 Reinforcing round end-caps Technical information Material Black-oxide weldable steel. Features and applications Threaded mounting plates GN 349 are used on levelling feet particularly in such cases where a machine shrouding is made of very thin sheet metal.

E+G GN 992

Elesa+Ganter GN 992 Threaded tube inserts serve as end plugs in tubing which offer the additional facility for fitting threaded levelling feet.
Threaded tube inserts can bridge as well as square tube of ± 0,5mm. For this purpose lamellas a available. Threaded tube inserts are fitted with a mallet.

 

E+G Support base BAG2-120

Elesa+Ganter BAG2-120 support bases with two bearings and connection joint Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Clamping system - Execution A: nuts, M10 screws and washers in zinc-plated steel. - Execution SST: nuts, M10 screws and washers in AISI 304 stainless steel.

E+G Support base BAG2-180

Elesa+Ganter BAG2-180 support bases with two bearings and connection joint Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Clamping system - Execution A: nuts, M10 screws and washers in zinc-plated steel. - Execution SST: nuts, M10 screws and washers in AISI 304 stainless steel

E+G Support base BAG2

Elesa+Ganter BAS2 support bases with two bearings Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Standard executions -BAS2-A: nuts, M10 screws and washers in zinc-plated steel. -BAS2-SST: nuts, M10 screws and washers in AISI 304 stainless steel.

E+G Support base BAG3

Elesa+Ganter BAS3 support bases with three bearings Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Standard executions - BAS3-A: nuts, M10 screws and washers in zinc-plated steel. - BAS3-SST: nuts, M10 screws and washers in AISI 304 stainless steel.

E+G Connection joint GC

Elesa+Ganter GC. Connection joints Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Clamping system - Execution A: nuts and M8 cylindrical-head screws with hexagon socket in zinc-plated steel. - Execution SST: nuts and M8 cylindrical-head screws with hexagon socket in AISI 304 stainless steel.

E+G Guide rail clamp MPG

Elesa+Ganter MPG. guide rail clamps Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Standard executions AISI 304 stainless steel cylindrical head screws with hexagon socket, nickel-plated brass nuts. - MPG-C: for round guide. - MPG-T: for both the standard trapezoidal guides.

E+G Guide rail clamp MPG-2

Elesa+Ganter MPG-2 guide rail clamps Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Standard executions -AISI 304 stainless steel washers. - MPG-2C: housings for round guides, without pin. - MPG-2C-P: housings for round guides, with AISI 304 stainless steel pin and clamping nut. - MPG-2T: housings for standard trapezoidal guides, without pin. - MPG-2T-P: housings for standard trapezoidal guides, with AISI 304 stainless steel pin and clamping nut.

E+G Guide rail clamp MPG-S

Elesa+Ganter MPG-S guide rail clamps Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Standard executions AISI 304 stainless steel screws and nuts. - MPG-C-S: housings for round guides, without pin. - MPG-C-S-P: housings for round guides with AISI 304 stainless steel pin. - MPG-T-S: housings for standard trapezoidal guides, without pin. - MPG-T-S-P: housings for standard trapezoidal guides with AISI 304 stainless steel pin.

E+G Adj. guide rail bracket SPR.V

elesa+Ganter SPR.V Guide rail bracket for linear and angular positioning Bracket Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Hole for clamping system assembly. Colour Black, matte finish. Guide rail cylinder Glass-fibre reinforced technopolymer. Black colour, matte finish. Clamping system - Nickel-plated AISI 431 stainless steel eye screw. - Glass-fibre reinforced technopolymer clamping knob, black colour, matte finish. Nickel-plated brass insert with tapped hole and hexagonal end. - Nut, screw and washer for the fixing of guide rail cylinder in AISI 304 stainless steel

E+G Guide rail bracket SPR

Elesa+Ganter SPR. Guide rail brackets for linear angular positoning Bracket Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Hole for clamping system assembly. Colour Black, matte finish. Guide rail cylinder Glass-fibre reinforced technopolymer. Black colour, matte finish. Clamping system Nickel-plated AISI 431 stainless steel eye screw, nut and washer in AISI 304 stainless steel. Features and applications SPR. guide rail brackets are particularly suitable when a linear and angular positioning is required.

E+G Guide rail bracket SPF

Elesa+Ganter SPF. Guide rail brackets for linear positioning Bracket Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Housings for horizontal or vertical assembly of clamping system. Colour Black, matte finish. Clamping system AISI 431 stainless steel eye screw and AISI 304 stainless steel washer. - SPF.V: with glass-fibre reinforced technopolymer clamping knob, black colour, matte finish. Nickel-plated brass insert with tapped hole and hexagonal end. - SPF.D: with AISI 304 stainless steel clamping nut.

E+G Side mounting top bracket TSLA

Elesa+Ganter TSLA. Side mounting top brackets Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Clamping system - Execution A: nut, M10 screw and washer in zinc-plated steel. - Execution SST: nut, M10 screw and washer in AISI 304 stainless steel.

E+G Side mounting top bracket TSLB

Elesa+Ganter TSLB. Side mounting top brackets Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Clamping system - Execution A: nut, M10 screw and washer in zinc-plated steel. - Execution SST: nut, M10 screw and washer in AISI 304 stainless steel.

E+G Bearing head TTA

Elesa+Ganter TTA. Bearing heads Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Clamping system - Execution A: nut, M10 screw and washer in zinc-plated steel. - Execution SST: nut, M10 screw and washer in AISI 304 stainless steel

E+G Bearing head TTB

Elesa+Ganter TTB. Bearing heads Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Standard executions - TTB-A: zinc-plated steel M10 screw, nut and washer. - TTB-SST: AISI 304 stainless steel M10 screw, nut and washer.

E+G MSX base

Elesa+Ganter MSX Base Base Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Fitting by means of a stainless steel M5 cylindrical-head screw with hexagon socket and nut.

E+G MSX device clamp

Elesa+Ganter MSX Device clamps Device clamps Glass-fibre reinforced technopolymer, black colour, matte finish. Fitting by means of a stainless steel M5 cylindrical-head screws with hexagon socket and nuts.

E+G MSX T-clamp

Elesa+Ganter MSX T-shaped clamp T-shaped clamp Glass-fibre reinforced technopolymer, black colour, matte finish. Fitting by means of stainless steel M5 cylindrical-head screws with hexagon socket and nuts.

E+G MSR Cover

Elesa+Ganter MSR covers Screw covers Technopolymer in six colours, glossy finish. Supplied not assembled, push-fit assembly, removable by a screwdriver. Available also as accessories sold separately.

E+G MSR Socket

Elesa+Ganter MSR Base Base Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Screw covers Technopolymer in six colours, glossy finish. Supplied not assembled, push-fit assembly, removable by a screwdriver. Available also as accessories sold separately (see table below)

E+G MSR T-connecter

Elesa+Ganter MSR T-shaped clamp T-shaped clamp Glass-fibre reinforced technopolymer, black colour, matte finish.

E+G MSR Pipes

Elesa+Ganter MSR Connecting tubes Connecting tubes Aluminium profile available with standard lengths from 100 to 2000 mm. On request and for sufficient quantities other lengths are available.

E+G MSR Mount pieces

Elesa+Ganter MSR Device clamp Device clamps Glass-fibre reinforced technopolymer, black colour, matte finish.

E+G Panel support clamp

Elesa+Ganter PC panel support clamp Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resitant to solvents, oils, greases and other chemical agents. Colour RAL 7042 grey, matte finish. Pads Thermoplastic elastomer, hardness 70, Shore A, overmoulded

E+G PPR Support Clamp

Elesa+Ganter PPR support clamp

Standard executions are available for the mounting of panel with or without vibration-damping elements, which are made of NBR rubber. The rubber has a hardness on 90 Shore A and it ensures perfect locking of the panel and for the mounting of electrowelded mesh.

PPR are available in black or grey and are made of glass-fibre reinforced polyamide SUPER-technopolymer with a matte finish.
Screw and nut are available in AISI 304, stainless steel with M5 thread.

PPR: For the mounting of panels, without vibration-damping elements
PPR-A: For the mounting of panels, with vibration-damping elements
PPR-R: For the mounting of electro-welded mesh (diameter 3 mm.), without vibration-damping elements

Colours:
- C33: Grey
- C9: Black

Features and applications:
– Assembly on square-section profiles of 25 mm.
– Panel drilling is not required for mounting
– Rubber vibration-damping elements to ensure perfect locking of the panel, even if the tolerance doesn’t fit perfectly, or in presence of strong vibrations
– Safety in compliance with ISO 13857, paragraph 4.2.4
– There is minimum safety distance (D) between the protections structure and the machine

Assembly of the clamp on the profile:
Tighten the clamp against the profile and the panel or the electro-welded mesh, using the screw and the nut included in the package.

E+G Connection angle SQT.

Elesa+Ganter STQ Angles for profile structures Material Glass-fibre reinforced polyamide-based technopolymer (PA). Resistant to solvents, oils, greases and other chemical agents. Colour Grey similar to RAL 7046, matte finish. Assembly Execution A: with two slots for M8 screws, not supplied. Execution F: with two holes for M8 screws, not supplied, with centering slides. Execution AF: with slot and hole for M8 screws, not supplied, with centering slides. In case of assembly with two screws in the slot, we suggest you to use screws type UNI 9327 DIN 7984.

E+G Adjustable angle STC-A

 

E+G Tube connectors STE

 

E+G Tube connectors RTE

 

E+G End-caps NDE.Q

 

E+G End-caps NDE.T

 

E+G Low End-caps NDLQ

 

E+G End-caps with adjustable height NDA.Q

 

E+G End-caps with adjustable height NDA.T

 

E+G GN 355 Levelling elements

Elesa+Ganter GN 355 Levelling elements
Material: Blackened steel.
Cylinder head screw DIN 912, 8.8: Zinc plated steel, blue passivated.
Washer DIN 433: Zinc plated steel, blue passivated.
Accessories: Assembly tool GN 355.1

Mounting description: See separate document.

E+G GN 355-NI Levelling elements

Elesa+Ganter GN 355-NI Levelling elements
Material: AISI 303 Stainless Steel.
Cylinder head screw DIN 912: Stainless steel A2-70
Washer DIN 433: AISI 304 stainless steel.
Accessories: Assembly tool GN 355.1

E+G Mounting tool for GN 355

Elesa+Ganter GN 355.1
Mounting tool for GN 355 and GN 355-NI
Material: Blackened steel, surface hardened.

E+G GN 148.2 Rubber pads

Elesa+Ganter GN 148.2 Rubber pads

Material: NBR Rubber, hardness 68 Shore, black colour, oil resistant.

Standard versions available
- Type A: for levelling elements with two hole flange (d1 = 60 / 90 / 113).
- Type B: for levelling elements with four hole flange (d1 = 113 / 126).

E+G GN 963 Cover caps

Elesa+Ganter GN 963 Cover caps for angle pieces for profile systems

Material: Plastic.
Black colour RAL 9005, textured finish.

E+G GN 360 Levelling feet

GN 360 levelling feet with load capacity of the levelling feet from 7 to 22.5 tons.

Available in two materials – in a galvanized steel version as well as in high quality, non rusting A2 Stainless Steel.

The compensating element is levelled by means of fine thread between the foot and support elements using a C-Spanner and can be locked, if necessary, with a slotted nut that can be easily ordered for each type. Thanks to an integrated circlip, the levelling thread can be prevented from being unscrewed completely, ensuring the minimum screw-in depth.

The levelling foot itself is fastened to machines and plants either from above using the female thread in the support element or from below using the female thread in the machine base.

E+G GN 6311.6 levelling feet

Elesa+Ganter GN 6311.6 Stainless Steel-Levelling feet are used for installing and leveling devices and equipment.

Available in 3 different types:

OS: without plastic cap
KS: with plastic cap, gliding
KR: with plastic cap, non-gliding

Material:

Type KS:
Technopolymer (Polyacetal POM), white (natural color) RAL 9001

Type KR:
Elastomer (TPE), Hardness ≈ 75 Shore A, black

Retaining spring
Stainless Steel AISI 301

E + G GN 20 Levelling foot

E + G GN 20 Levelling foot

(0)

E+G GN 1580 Hygienic Screw

E+G GN 1580 Hygienic Screw

(0)

E+G GN 1580 Hygienic Nut

E+G GN 1580 Hygienic Nut

(0)

E+G Base and Threaded stem

E+G Base and Threaded stem

(103)

E+G GN 30 levelling foot

E+G GN 30 levelling foot

(412)

E+G GN 31 levelling foot

E+G GN 31 levelling foot

(1,881)

E+G GN 339 Levelling elements

E+G GN 339 Levelling elements

(8)

E+G GN 343.2

E+G GN 343.2

(164)

E+G GN 343.6 st. steel

E+G GN 343.6 st. steel

(165)

E+G GN 342.2 Levelling elements

E+G GN 342.2 Levelling elements

(7)

E+G GN 21 Levelling elements

E+G GN 21 Levelling elements

(0)

E+G GN 40 Levelling elements

E+G GN 40 Levelling elements

(489)

E+G GN 41 Levelling elements

E+G GN 41 Levelling elements

(798)

E+G GN 33 Levelling elements

E+G GN 33 Levelling elements

(336)

E+G GN 32 Levelling elements

E+G GN 32 Levelling elements

(182)

E+G GN 42 Levelling elements

E+G GN 42 Levelling elements

(381)

E+G GN 43 Levelling elements

E+G GN 43 Levelling elements

(642)

E+G GN 343.1

E+G GN 343.1

(50)

E+G Levelling element LW.A

E+G Levelling element LW.A

(4)

E+G GN 343.3

E+G GN 343.3

(20)

E+G GN 343.7 st. steel

E+G GN 343.7 st. steel

(20)

E+G GN 343.5 st. steel

E+G GN 343.5 st. steel

(50)

E+G GN 342.1 Levelling elements

E+G GN 342.1 Levelling elements

(4)

E+G Round end-caps NDX.T

E+G Round end-caps NDX.T

(96)

E+G End-cap ND.Q

E+G End-cap ND.Q

(10)

E+G Square end-caps NDX.Q

E+G Square end-caps NDX.Q

(89)

E+G Nut NT

E+G Nut NT

(13)

E+G LV.A-ESD-C bases

E+G LV.A-ESD-C bases

(14)

E+G GN 343.4

E+G GN 343.4

(66)

E+G GN 343.8 st. steel

E+G GN 343.8 st. steel

(66)

E+G Levelling element LV.A-125-ACV

E+G Levelling element LV.A-125-ACV

(12)

E+G Levelling element LV.F-125-ACV

E+G Levelling element LV.F-125-ACV

(12)

E+G Levelling element LV.A-125-APS

E+G Levelling element LV.A-125-APS

(10)

E+G Levelling element LV.F-125-APS

E+G Levelling element LV.F-125-APS

(10)

E+G Levelling element LV.A-ELK

E+G Levelling element LV.A-ELK

(4)

E+G LX Levelling elements

E+G LX Levelling elements

(126)

E+G GN 6311.4 Levelling feet

E+G GN 6311.4 Levelling feet

(0)

E+G GN 23 Levelling elements

E+G GN 23 Levelling elements

(0)

E+G GN 349 End-caps

E+G GN 349 End-caps

(3)

E+G GN 992

E+G GN 992

(32)

E+G Support base BAG2-120

E+G Support base BAG2-120

(10)

E+G Support base BAG2-180

E+G Support base BAG2-180

(10)

E+G Support base BAG2

E+G Support base BAG2

(6)

E+G Support base BAG3

E+G Support base BAG3

(8)

E+G Connection joint GC

E+G Connection joint GC

(10)

E+G Guide rail clamp MPG

E+G Guide rail clamp MPG

(5)

E+G Guide rail clamp MPG-2

E+G Guide rail clamp MPG-2

(8)

E+G Guide rail clamp MPG-S

E+G Guide rail clamp MPG-S

(20)

E+G Adj. guide rail bracket SPR.V

E+G Adj. guide rail bracket SPR.V

(6)

E+G Guide rail bracket SPR

E+G Guide rail bracket SPR

(6)

E+G Guide rail bracket SPF

E+G Guide rail bracket SPF

(6)

E+G Side mounting top bracket TSLA

E+G Side mounting top bracket TSLA

(2)

E+G Side mounting top bracket TSLB

E+G Side mounting top bracket TSLB

(8)

E+G Bearing head TTA

E+G Bearing head TTA

(2)

E+G Bearing head TTB

E+G Bearing head TTB

(8)

E+G MSX base

E+G MSX base

(3)

E+G MSX device clamp

E+G MSX device clamp

(18)

E+G MSX T-clamp

E+G MSX T-clamp

(3)

E+G MSR Cover

E+G MSR Cover

(6)

E+G MSR Socket

E+G MSR Socket

(7)

E+G MSR T-connecter

E+G MSR T-connecter

(1)

E+G MSR Pipes

E+G MSR Pipes

(7)

E+G MSR Mount pieces

E+G MSR Mount pieces

(6)

E+G Panel support clamp

E+G Panel support clamp

(1)

E+G PPR Support Clamp

E+G PPR Support Clamp

(28)

E+G Connection angle SQT.

E+G Connection angle SQT.

(10)

E+G Adjustable angle STC-A

E+G Adjustable angle STC-A

(0)

E+G Tube connectors STE

E+G Tube connectors STE

(0)

E+G Tube connectors RTE

E+G Tube connectors RTE

(0)

E+G End-caps NDE.Q

E+G End-caps NDE.Q

(0)

E+G End-caps NDE.T

E+G End-caps NDE.T

(0)

E+G Low End-caps NDLQ

E+G Low End-caps NDLQ

(0)

E+G End-caps with adjustable height NDA.Q

E+G End-caps with adjustable height NDA.Q

(0)

E+G End-caps with adjustable height NDA.T

E+G End-caps with adjustable height NDA.T

(0)

E+G GN 355 Levelling elements

E+G GN 355 Levelling elements

(5)

E+G GN 355-NI Levelling elements

E+G GN 355-NI Levelling elements

(5)

E+G Mounting tool for GN 355

E+G Mounting tool for GN 355

(5)

E+G GN 148.2 Rubber pads

E+G GN 148.2 Rubber pads

(0)

E+G GN 963 Cover caps

E+G GN 963 Cover caps

(0)

E+G GN 360 Levelling feet

E+G GN 360 Levelling feet

(0)

E+G GN 6311.6 levelling feet

E+G GN 6311.6 levelling feet

(0)

Close

Share site

Please fill in the form below with your details. Fields marked with must be completed

Share site

Thank you for sharing this page. Your friend will shortly receive an email.
Close

Newsletter

Subscribe

Close

Send us an email

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Call me request

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Log in

Please fill in the form with your username and password to log in at Brd. Klee



Have you forgotten your password?
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • Own profile with own lot number, reordering and favourites
  • 24 hours service
Close

Lost Password

Please give us your email, and we will send you instructions on how to reset your password to your mail.


Recover password
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • My profile with own lot number, reordering and favorites
  • 24 hours emergency service
Close

Create profile

Please fill in the form below with your request. Fields marked with must be completed




Close

Complete

There is now sent a request for inclusion in our customer base.

If your company is recognized for the terms you will within 24 hours receive an email with your password.

Welcome to Brd. Klee

Close