Elesa+Ganter GN 164 Scale rings
Material
Turned steel.
- Version MCR: matte chrome-plated finish.
- Version MCRS: matte chrome-plated finish with standard scale from 0 to 90, 100 graduations, scale scheme d1/100 A RA 0-
10-20...90/10.
Assembly
- Type B: H7 reamed hole, without friction ring.
- Type R: H7 reamed hole, with NBR synthetic rubber friction ring.
Elesa+Ganter GN 264 Control mechanisms graduated rings
• Material
Natural steel, turned finish.
• Standard executions
H7 reamed hole.
-- GN 264: natural finish.
-- GN 264-MCR: chrome-plated matte finish.
-- GN 264-MCRS: chrome-plated matte finish, with scale d1/100-
RA-0-10-20 ... 90/10, 100 marks, numbering from 0 to 90 increases as
the knob is turned clockwise.
Features and applications
To complete the range of the graduated rings are available as standard
accessories base flanges type GN 268 (see page ) and flat springs GN 374 (see page ).
Elesa+Ganter GN 726 Knurled control knobs
Material
Knurled aluminium profile, anodised.
Colour
Black.
Cap
Acetal resin based (POM) technopolymer, light grey colour. Resistant to solvents, oils, greases and other chemical agents.
- Execution M: black index.
- Execution N: plain.
Assembly
- Execution B: H8 reamed hole. Assembly by means of a stainless steel transversal grub screw with hexagon socket, supplied
assembled. DIN 916 stainless steel pressure socket head screw for fitting to shaft (identification with No.1 grub screw).
- Execution Z: with collet (identification with No.2).
Elesa+Ganter GN 726.1 Knurled control knobs
Material
Knurled aluminium profile, anodised.
- Execution A: triangular index (white perimeter).
- Execution B: plain surface.
- Execution S: white precision graduation. Numbering increases as the knob is turned clockwise, scale from 0 to 9 (20 diving
marks).
Graduation and triangular index are laser-engraved: high-precision and perfect readability.
Colour
Black.
Cap
Acetal resin based (POM) technopolymer, light grey colour. Resistant to solvents, oils, greases and other chemical agents.
Assembly
- Execution B: H8 reamed hole. Assembly by means of a stainless steel transversal grub screw with hexagon socket, supplied
assembled. DIN 916 stainless steel pressure socket head screw for fitting to shaft (identification with No.1 grub screw).
- Execution Z: with collet (identification with No.2).
Elesa+Ganter GN 726.2 Knurled control knobs with graduated flange
Material
Knurled aluminium profile, anodised.
Colour
Black.
Cap
Acetal resin based (POM) technopolymer, light grey colour. Resistant to solvents, oils, greases and chemical agents.
Flange
Polyamide based (PA) technopolymer:
- Execution A: triangular index (white perimeter).
- Execution B: plain.
- Execution S: white precision graduation. Numbering increases as the knob is turned clockwise, scale from 0 to 9 (20 marks).
Graduation and triangular index are laser-engraved: high-precision and perfect readability.
Assembly
- Execution B: H8 reamed hole. Assembly by means of a stainless steel transversal grub screw with hexagon socket, supplied
assembled. DIN 916 stainless steel pressure socket head screw for fitting to shaft (identification with No.1 grub screw).
- Execution Z: with collet (identification with No.2).
Elesa+Ganter IZP. Knurled control knobs
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Self-adhesive front plate
Anodised aluminium.
Assembly
Plain blind hole. Assembly by means of a stainless steel transversal grub screw (with hexagon socket and cup end). Supplied
assembled.
Elesa+Ganter IZP+GS Knurled control knobs with graduation
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Self-adhesive front plate
Anodised aluminium.
Precision graduation
Numbering increases as the knob is turned clockwise, scale from 0 to 9 (20 dividing marks).
Graduation is laser-engraved: high-precision and perfect readability.
Elesa+Ganter IZN.380 Control knobs
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Boss cap
Acetal resin based (POM) technopolymer, light grey colour, push-fit assembly, removable by pressing on the outer edge
(ELESA original design).
Flange
Matte anodised aluminium, black index.
Assembly
Black-oxide steel boss, H7 reamed hole. Assembly by means of a set screw (redrill and tap hole f), with keyway or transversal
pin in the semi-machined hole (f).
Accessories on request
Ball and spring for clicking operation to be fitted in the assembly hole for knobs with diameter D ≥ 48 mm (see ball and spring
MS.).
Elesa+Ganter IZN.380+FGS Knurled control knobs with flange and index
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Boss cap
Acetal resin based (POM) technopolymer, light grey colour, push-fit assembly, removable by pressing on the outer edge
(ELESA original design).
Flange
Matte anodised aluminium, black index.
Assembly
Black-oxide steel boss, H7 reamed hole. Assembly by means of a set screw (redrill and tap hole f), with keyway or transversal
pin in the semi-machined hole (f).
Accessories on request
Ball and spring for clicking operation to be fitted in the assembly hole for knobs with diameter D ≥ 48 mm (see ball and spring
MS.).
Elesa+Ganter IZN.380+FGS Knurled control knobs with flange and index
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Boss cap
Acetal resin based (POM) technopolymer, light grey colour, push-fit assembly, removable by pressing on the outer edge
(ELESA original design).
Flange
Matte anodised aluminium, black index.
Assembly
Black-oxide steel boss, H7 reamed hole. Assembly by means of a set screw (redrill and tap hole f), with keyway or transversal
pin in the semi-machined hole (f).
Accessories on request
Ball and spring for clicking operation to be fitted in the assembly hole for knobs with diameter D ≥ 48 mm (see ball and spring
MS.).
Elesa+Ganter IZN.380+K Knurled control knobs with flange and index
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Boss cap
Acetal resin based (POM) technopolymer, light grey colour, push-fit assembly, removable by pressing on the outer edge
(ELESA original design).
Flange
Matte anodised aluminium, black index.
Assembly
Black-oxide steel boss, H7 reamed hole. Assembly by means of a set screw (redrill and tap hole f), with keyway or transversal
pin in the semi-machined hole (f).
Accessories on request
Ball and spring for clicking operation to be fitted in the assembly hole for knobs with diameter D ≥ 48 mm (see ball and spring
MS.).
Elesa+Ganter F.N Plain flange for application on control knobs
Material
Matte anodised aluminium.
Assembly
Three self-tapping rivets, supplied, for fitting to knobs type IZN.380.
Elesa+Ganter MS. Ball and spring
Ball
AISI 420 stainless steel.
Spring
B class steel.
Features and applications
MS. group is indicated for fitting on the following control elements where clicking operation is required:
- IZN.380
- EGK.SOFT
- LBR.
- LBR.N
- ELC.
- ELCR.
Elesa+Ganter VH.153+IN Indicator knobs
Material
Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Flange with pointer
Polyamide based (PA) technopolymer, white indicator line.
Colour
Black, glossy finish.
Standard executions
- VH.153-B+IN: brass boss, plain blind hole.
- VH.153-A+IN: black-oxide steel boss, plain blind hole.
Assembly by means of supplied transversal grub screws UNI 5929-85
(grub screws with hexagon socket and cup end).
Elesa+Ganter VC.192+F Lobe knobs with flange and pointer
Material
Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Flange with pointer
Polyamide based (PA) technopolymer, white indicator line.
Colour
Black, glossy finish.
Assembly
- Execution A: black-oxide steel boss, plain blind hole.
- Execution B: brass boss, plain blind hole.
Assembly by means of transversal grub screws according to UNI 5929-85 (grub screws with hexagon socket and cup end).
Supplied assembled.
Elesa+Ganter VC.192+NI Lobe knobs with pointer
Material
Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Pointer
Polyamide based (PA) technopolymer.
Colour
Black, glossy finish.
Assembly
- Execution A: black-oxide steel boss, plain blind hole.
- Execution B: brass boss, plain blind hole.
Assembly by means of transversal grub screws according to UNI 5929-85 (grub screws with hexagon socket and cup end).
Supplied assembled.
Elesa+Ganter MI.204 Indicator knobs
Material
Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Index
White line.
Elesa+Ganter GN 729 Control knobs
Material
Anodised aluminium.
Colour
Black.
Index
White laser-engraved line.
Assembly
H8 reamed hole. Assembly by means of a stainless steel transversal grub screw with hexagon socket. Supplied assembled.
Elesa+Ganter EGK.SOFT Grip knobs
Material
High-resilience technopolymer coated with "soft-touch" thermoplastic elastomer (TPE). Resistant to solvents, oils, greases and
other chemical agents.
Colour
Grey-black, matte finish.
Closing cap
Glass-fibre reinforced polyamide based (PA) technopolymer, in the Ergostyle colours, matte finish. Supplied push-fit assembly,
removable by a screwdriver.
Available also as accessory sold separately (see table below).
Standard executions
Assembly by means of a keyway or a transversal pin in the semi-machined hole f or a set screw (redrill and tap hole f).
- EGK: black-oxide steel boss, H7 reamed hole.
- EGK-SST: AISI 303 stainless steel boss, H7 reamed hole.
Elesa+Ganter GN 736 Control handwheel
Specification
Bore code
- B: without keyway
- K: with keyway
- Z: with collet
Type
- Type A: without handle
- Type D: with revolving handle
Aluminium
anodized, black
Hub cover
Plastic, light grey
Collet / Hexagon nut
Brass
Revolving cylindrical handles GN 599.5
Plastic, Technopolymer
black, matt
Elesa+Ganter GN 736.1 Control handwheel
Material
Knurled aluminium profile, anodised.
Colour
Black.
Cap
Acetal resin based (POM) technopolymer, light grey colour. Resistant to solvents, oils, greases and other chemical agents.
Assembly
- Version B: H8 reamed hole.
- Version K: H8 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance.
- Version Z: with collet and graduated ring (scale 0...90, 100 graduations, scale scheme d1/100 A RA 0-10-20....90/10).
Handle
- Type A: without handle.
- Type D: with revolving handle in polyamide based (PA) technopolymer, black colour, glossy finish.
Elesa+Ganter MBT+I Diamond cut knurled knobs with revolving handle
Material
High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, matte finish.
Coloured centre cap
Technopolymer, matte finish.
To order, add the index of the desired colour (C9, ..., C6) to the code and the description.
On request and for sufficient quantities, it can be supplied in other colours or with customised graphic symbols, marks or
writings.
Revolving handle
Type I.701+x polyamide based (PA) technopolymer, black colour, matte finish.
Standard execution
Brass boss, plain hole. Assembly by means of a supplied transversal grub screw UNI 5929-85 (grub screw with hexagon socket
and cup end).
Elesa+Ganter VL140+I Lobe knobs with revolving handle
Material
Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Revolving handle
Type I.281+x Duroplast, black colour, glossy finish.
Assembly
Black-oxide steel hub, with pre-drilled blind hole.
Elesa+Ganter VL 140 FP Lobe knobs
•Phenolic based (PF) Duroplast.
Resistant to solvents, oils, greases and other chemical agents.
•Black standard colour with glossy finish.
•Metal hub with uncovered front end.
A - black oxide steel:
not drilled
with plain H7 tolerance through hole
with tapped 6H tolerance through hole.
B - brass not drilled.
Elesa+Ganter GN 727 Control knobs adjustable apindle
Specification
Types
- Type A: Fixing hole, parallel to the spindle axie
- Type B: Fixing hole, vertical to the spindle axie
- Type S1: Mounting with Hexagon head screw
Coding
- Version SR: with scale 0,1...0,9, 50 graduations ascending clockwise
- Version SL: with scale 0,1...0,9, 50 graduations ascending anti-clockwise
Body
Steel
matt Chrome plated
Spindel
Steel
blank
Control knob
Aluminium
anodized, black
Hexagon head screw
Steel
blackened
Scales engraved with laser precision
Cover Plastic, light grey
Elesa+Ganter GN 200 Indexing mechanisms with stop and positioning device
Knob
Black-oxide steel.
- Execution A: knurled surface.
- Execution AS: matte chrome-plated steel external body with laser-engraved precision flange (scale 0 ...50, 60
graduations).
- Execution B: smooth surface, with lever arm and cylindrical handle type I.280 in phenolic based (PF) Duroplast, black colour,
glossy finish. Resistant to solvents, oils, greases and other chemical agents.
- Execution C: indexing mechanisms with two arms.
Base
Black-oxide steel. Assembly by means of three holes for M5 countersunk head screws.
AISI 303 stainless steel bushing. H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance for dimension
K10 and in compliance with DIN 6885/2 P9 tolerance for dimension K14. Assembly to the spindle by means of a keyway or
a transversal pin.
Elesa+Ganter GN 200-NI Indexing mechanisms with stop and positoning device
Knob
- Execution A: AISI 303 stainless steel, knurled finish.
- Execution AS: matte chrome-plated steel external body with laser-engraved precision flange (scale 0 ...50, 60
Base
AISI 303 stainless steel. Assembly by means of three holes for M5 countersunk head screws.
Assembly
AISI 303 stainless steel bushing. H7 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance for dimension
K10 and in compliance with DIN 6885/2 P9 tolerance for dimension K14. Assembly to the spindle by means of a keyway or
a transversal pin.
Elesa+Ganter GN 700 Locking and continuous control indexing mechanisms
Knob
Knurled anodised aluminium, black colour, matte finish.
Base
Black-oxide steel. Assembly by means of three holes for M5 cylindrical head screws with hexagon socket.
Scale ring
Black anodised matte aluminium.
Assembly to the bushing by means of two countersunk head screws.
Internal locking mechanism
Ground and hardened steel.
Standard executions available
- Execution A: base with triangular index, ring with indexing line.
- Execution B: base and ring with plain surface.
- Execution S: base with triangular index, ring with graduated scale from 0 to 9 (100 dividing marks).
Elesa+Ganter GN 750 Control Levers
Version
Black-oxide steel hub.
- Execution B: H7 reamed through hole.
- Execution K: H7 reamed through hole and keyway in compliance with DIN 6885/1 P9 tolerance.
- Execution V: H11 tolerance square through hole.
For fixing GN 750 on shafts by a grub screw see Technical Data.
Hub cap
Acetal resin based (POM) technopolymer, light grey colour. Resistant to solvents, oils, greases and other chemical agents.
- Execution M: black index.
- Execution N: plain.
Lever arm
Black-oxide steel with cylindrical handle type I.280 in phenolic based (PF) Duroplast, black colour, glossy finish.
Elesa+Ganter ELC Control levers
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Grey-black, matte finish.
Boss cap
Technopolymer in the Ergostyle colours, matte finish; supplied not assembled, push-fit assembly, removable by a screwdriver.
Available also as accessory sold separately (see boss cap table).
Standard executions
- ELC: black-oxide steel boss, H7 reamed hole, cap in the Ergostyle colours.
- ELC-FC3: black-oxide steel boss, H7 reamed hole, cap in RAL 7035 light grey colour, with arrow indicator.
- ELC-SST: AISI 303 stainless steel boss, H7 reamed hole, cap in the Ergostyle colours.
-ELC-SST-FC3: AISI 303 stainless steel boss, H7 reamed hole, cap in RAL 7035 light grey colour, with arrow indicator.
Elesa+Ganter ELCR Control
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Grey-black, matte finish.
Assembly
Black-oxide steel boss, H7 reamed hole.
Boss cap
Technopolymer in the Ergostyle colours, matte finish; supplied not assembled, push-fit assembly, removable by a screwdriver.
Available also as accessory sold separately (see boss cap table).
Elesa+Ganter LBR Control levers
Lever body
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Black-oxide steel boss, H7 reamed hole.
Lever arm
Matte chrome-plated steel with cylindrical handle type I.280 in phenolic based (PF) Duroplast, black colour, matte finish.
Self-adhesive front plate
Matte anodised aluminium to be fitted after the assembly of the lever.
Elesa+Ganter LBR.N Control levers
Lever body
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour
Black, glossy finish.
Assembly
Plain hole with flat face.
- LBR.45 N and LBR.54 N: flat face opposite to the arm.
- LBR.75 N: flat face in correspondance of the arm.
Lever arm
Matte chrome-plated steel with cylindrical handle type I.280 in phenolic based (PF) Duroplast, black colour, matte finish.
Self-adhesive front plate
Matte anodised aluminium to be fitted after the assembly of the lever.
Elesa+Ganter GN 215 Indexing levers
Base
Black-oxide steel. Assembly to the machine body by means of two M5 cylindrical head screws with hexagon socket:
- Execution A: rim without notch.
- Execution B: notched rim with 30 teeth.
Lever arm
Black-oxide steel with ball handle type DIN 319 in phenolic based (PF) Duroplast, black colour, glossy finish. Resistant to
solvents, oils, greases and other chemical agents.
Cap
Acetal resin based (POM) technopolymer, black colour, matte finish, push-fit assembly, removable by a screwdriver. Selfadhesive
plate in anodised aluminium, natural colour, matte finish.
Assembly
Black-oxide steel bushing, with H7 reamed hole and keyway according to the following instructions (see Technical Data):
- dimension K10: keyway 3 tolerance P9x1.1 mm
- dimension K14: keyway in compliance with DIN 6885/2 P9 tolerance.
Accessories on request
Disk milling cutters to mill standard notches.
Elesa+Ganter GN 558 Control levers with positioning and rest pin.
Material
Deburred nodular cast iron, sandblasted matte finish.
Assembly
- Execution B: hub with plain hole.
- Execution K: hub with H7 reamed hole and keyway in compliance with DIN 6885/2 P9 tolerance.
Cylindrical handle
Black-oxide steel.
Positioning and rest pin
Hardened steel.
Elesa+Ganter GN 723.3 Reference flanges
Material
Aluminium, anodised black.
Reference arrow
White, engraved with laser precision.
Standard versions available
- Version A: with friction ring.
- Version B: without friction ring.
Clamp ring
NBR synthetic rubber.
Friction ring
Polyamide based (PA) technopolymer.
Elesa+Ganter Control knobs
Material
Aluminium, anodised, natural colour.
Standard versions available
- Version N neutral.
- Version M with arrow.
- Version S with scale 0...9, 20 graduation.
Scale (Version S) and arrow (Version M) are engraved with laser precision.
Grub screw
Stainless steel DIN 916 with internal hexagon and with serrated point.
Spirit levels are small and inconspicuous - but important little helpers. When a machine, a tripod or an assembly point is to be aligned with precision, the grand entrance of these standard elements has come. This is why Elesa+Ganter has included these elements in its range of products.
If precision is called for, the accurate horizontal alignment and orientation of production plants, measuring instruments, adjustment units or assembly elements is crucially important. Integrated spirit levels allow objects “to be levelled out” with ease, and the exact position can be checked later at any time and at a glance.
The way spirit levels work is simple: a hollow body accommodates a fl uid and a gas bubble, with the bubble always fl oating by its buoyancy to the highest point.
In screw-on levels this effect is accomplished with a slight curvature of the cylindrical body. If the gas bubble is located between the two linear markings, the object is aligned horizontally in one direction. The two-dimensional alignment therefore needs two screw-on levels turned by 90 degrees – or a bull’s eye level.
A bull’s eye level shows the position of the object in two directions at the same time: once the gas bubble is situated in the middle of the centric circular marking, the horizontal position is reached.
Elesa+Ganter has now included these universal and indispensable adjustment aids into its standard product range – as screw-in levels with one, two or three sight glasses, and as bull’s eye levels in various different designs. For instance as top-mounted threaded assembly, countersunk with threaded flange, for insertion into bore holes, for top-attachment with or without threaded, or as simple spirit level elements. And there are also the adjustable bull’s eye levels with a central alignment ball at their base and three threads. The level is adjusted by the targetspecific tightening of the three mounting screws. All bull’s eye levels are made in black or natural colour aluminium, while the screw-on levels are manufactured of powdered brass.
Elesa+Ganter GN 436 Slotted control knob
Material: AISI 304 stainless steel with sandblasted matte finish.
- Version M: marking engraved with laser precision.
- Version N: plain.
Assembly: Stainless steel screw DIN 916 with internal hexagon and with serrated point.
Elesa+Ganter GN 436.1 Slotted control knob
Material: AISI 304 stainless steel, sandblasted matte finish MT.
- Version A: with arrow engraved with laser precision.
- Version B: plain surface.
- Version S:with scale precision graduation. Numbering increases as the knob is turned clockwise, scale from 0 to 9 (20
dividing marks).
Grub screw: Stainless steel DIN 916 with internal hexagon nut and with serrated point.
Elesa+Ganter GN 268 Collar bush
Material: Blank steel.
Elesa+Ganter GN 374 Flat spring
Material: Blank steel
Elesa+Ganter GN 2277 Bull's eye level
Bull´s eye levels GN 2277 with mounting flange are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
The spirit levels are aligned in relation to the reference surface such that the bubble is located inside the marking ring once the vertical position of the contact surface is reached.
Sensitivity: 30 Angle minutes, bubble move by 2mm
Versions:
- Type A: Mounting flange, for bolting to surface
- Type B: Mounting flange, for inserting (collar)
Housing made from anodized aluminium
- natural colour ALN
- black ALS
Spirit level element with glass plastic body
Filling: colourless-transparent, mineral based
Elesa+Ganter GN 2278 Bull's eye level
Sensitivity: 30 Angle minutes, bubble move by 2mm
Housing made from anodized aluminium
- natural colour ALN
- black ALS
Spirit level element with glass plastic body
Filling: colourless-transparent, mineral-based
Bull´s eye levels GN 2278 for Insertion into bore holes are used to check the horizontal position of jigs, machines, devices, appliances and instruments. The housing is grooved at its lower Diameter d3, making it easier to mount in place, e.g. by gluing. The spirit levels are aligned in erealtion to the refernece or contact surface, so that the bubble is located inside the marking ring once the horizontal position of the contact surface is reached.
Elesa+Ganter GN 2279 Bull's eye level
Bull´s eye levels GN 2279 for surface mounting are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
Type A is used if the spirit leves is to be used as a tool, e.g. at different measuring points.
The air levels are aligned in relation to the reference surface such that the bubble is located inside the marking ring once the vertical position of the contact surface is reached.
Sensitivity: 30 Angle minutes, bubble move by 2 mm
Versions:
- Type A: with smooth reference surface
- Type B: with mounting thread
Housing in anodized aluminium
- natural colour ALN
- black ALS
Spirit level element:
Glass plastic body
Filling is colourless-transparent
E+G GN 2280 Bull's eye level
Bull´s eye levels levels GN 2280 with mounting threads are used to check the horizontal position of jigs, machines, devices, appliances and instruments. The mounting threads offset by 120° allow the air levels are aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques fo the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.
Sensitivity: 30 Angle minutes, bubble move by 2 mm
Housing made from anodized aluminium.
- natural colour ALN
- black ALS
Spirit level element with glass plastic body
Filling: colourless-transparent
Casting compound, mineral-based
Elesa+Ganter GN 2282 Screw-on level indicator
Screw-on levels GN 2282 for mounting screws are used to check the horizontal position of the jigs, machines, devices, appliances and instruments.
The spirit levels are aligned in relation to the finished reference surface so that the bubble is centered in the middle of the marking lines once the horizontal position of the contact surface in the longitudinal direction is reached.
Sensitivity:
- Type 6: Angle minutes, bubble move by 2 mm
- Type 50: Angle minutes, bubble move by 2 mm
Identification no.
- No. 1: Viewing window top
- No. 2: Viewing window top - front
- No. 3: Viewing windwo top - front - back
Housing in brass, plastic coated, textured finish. Two colours:
- black, RAL 9005 MSW
- silver, RAL 9006 MSR
Spirit lever element with glass plastic body and green-transparent filling.
Elesa+Ganter GN 2283 Screw-on level.
Used to check the horizontal position of jigs, machines, devices, appliances and instruments.
The spirit levels of type AV are aligned in relation to the reference surface so that the bubble is centered in the middle of the marking lines once the horizontal position of the contact surface is reached.
The spirit levels of type JV are aligned during installation using the fastening holes.
An alignment guide on the bottom serves as a pivot point. With careful tightening, it is possible to achieve an alignment that places the bubble between the middle marking lines.
Material: Housing in Aluminum
- Anodized, natural color ALN
- Anodized black ALS
Spirit level element: Glass body
Filling: Green-transparent
Casting compound: Mineral-based
E+G MBR Diamond cut knurled control knob
Material:
Knob made from high-resilience polypropylene based (PP) technopolymer, black colour, matte finish.
Collar or flange made from glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
Coloured centre cap in technopolymer, matte finish. Available in 7 different colours.
Versions available:
- MBR+C: plain collar.
- MBR+CK: collar with triangular index.
- MBR+CGS: collar with standard graduation, 40 marks, the numbering from 0 to 9 increases as the knob is turned clockwise.
- MBR+FK: flange with triangular index.
- MBR+FGS: flange with standard graduation, 40 marks, the numbering from 0 to 9 increases as the knob is turned clockwise.
- MBR+FKP: flange with triangular index. Rear compartment for potentiometer housing.
- MBR+FGSP: flange with standard graduation, 40 marks, the numbering from 0 to 9 increases as the knob is turned clockwise. Rear compartment for
potentiometer housing.
Assembly by means of a black-oxide steel transversal grub screw (included).
Elesa+Ganter GN 2276 Bull's eye level.
GN 2276 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
Two versions:
- Type AV: The spirit levels of type AV are aligned in relation to the reference surface so that the bubbles are centered in the middle of the marking lines once the horizontal position of the contact surface is reached.
- Type JV: The spirit levels of type JV are aligned using the fastening holes that are offset by 120°. An alignment ball on the bottom serves as a pivot point. With careful tightening, it is possible to achieve an alignment that places the bubbles between the middle marking lines.
Material:
- Housing in Aluminum (ALN: Anodized, natural color. ALS: Anodized black)
- Spirit level element in glass with green-transparent liquid
- Mineral-based casting compound
Elesa+Ganter GN 827 adjusting screw
Stainless Steel-Adjusting screws GN 827 are used in combination with bearing blocks GN 828 for simple adjustment and positioning tasks.
For processing and assembly equipment on which attachments and mechanisms must be regularly exchanged, positioned and adjusted, combining these with bearing blocks GN 828 of type A, UA and UB allows for particularly simple adjustments.
Material:
- Stainless Steel AISI 304 NG
- matte shot-blasted
Scale:
- laser-engraved, black discharged
- with standard scale 0...0,5, 10 graduations
Elesa+Ganter GN 827.1 knurled nut.
Stainless Steel-Knurled nuts GN 827.1 are used with Stainless Steel-Adjusting screws GN 827 to secure settings and positions in place by counterlocking. For processing and assembly equipment on which attachments and mechanisms must be regularly exchanged, particularly simple adjustments can be achieved by combining adjusting screws GN 827, knurled nuts GN 827.1 and bearing blocks GN 828 of the types UA and UB to ensure that settings are retained even between uses.
Material:
- Stainless Steel AISI 304, matte shot-blasted
Elesa+Ganter GN 828 bearing block for GN 827
Bearing blocks GN 828 are used in combination with Stainless Steel-Adjusting screws GN 827 for simple adjustment and positioning tasks.
For processing and assembly equipment on which attachments and mechanisms must be regularly exchanged, positioned and adjusted, combining Stainless Steel-Adjusting screws GN 827 with bearing blocks of type UA and UB allows for particularly simple adjustments.
On the opposing part, type A or threading already present in the mounting plate can be used.
Typer:
Type A: with thread, mounting from above
Type UA: with groove, mounting from above
Type UB: with groove, mounting from the front
Material:
Aluminum AM
matte ground
Reference line
laser-engraved, black discharged
Benifits for you as a customer at Brd. Klee
Benifits for you as a customer at Brd. Klee
