Elesa+Ganter GN 581 Lifting eye bolt (rotating)
Material: High-tensile forged tempered steel with pink plastic surface coating, 100% electro-magnetic tensile tested to EN 1677.
Executions:
- Type B: with spanner.
- Type A: without spanner.
Bolt: Steel, class 10.9 (tensile strength 1000 N/mm2), 100% electro magnetic tensile tested.
Eye Bolt comes with RFID Chip (Radio Frequency IDentification) which contains all data and certificates. If certificates are desired separately, they can be ordered as a request.
Elesa+Ganter GN 581.5 Lifting eye bolt (rotating)
Material: Body/Bolt in forged AISI 318 LN stainless steel with blank surface, 100% electro-magnetic tensile tested to EN 1677.
Eye bolt comes with RFID Chip (Radio Frequency IDentification) which contains all data and certificates. If certificates are desired separately, they can be ordered as a request.
Elesa+Ganter GN 583 Lifting eye nut
Body High-tensile forged tempered steel with pink plastic surface coating, 100% electro-magnetic tensile tested to EN 1677. Nut Steel, class 10.9 (tensile strength 1000 N/mm²).
Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).
Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4). The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006/42/EG and are BG tested. The hexagon socket nut cannot be removed from the ring.
Eye nuts comes with RFID Chip (Radio Frequency IDentification) which contains all data and certificates. If certificates are desired separately, they can be ordered as a request.
Elesa+Ganter GN 584 Shackle
Ring bracket: Heat-treatable steel, die-forged. Hot-dip galvanised.
Bolt: Heat-treatable steel, die-forged.
Galvanic zinc-plated, lacquered.
Standard versions
- Type A: with stud bolt.
- Type B: bolt with nut and split pin.
Elesa+Ganter GN 585 Shackle
Ring bracket: Heat-treatable steel, die-forged. Hot-dip galvanised.
Bolt: Heat-treatable steel, die-forged.
Galvanic zinc-plated, lacquered.
Standard versions
– Type A: with stud bolt.
– Type B: bolt with nut and split pin.
E+G GN 587.1 load rings for welding are designed for rapid mounting.
Load rings GN 587.1 for welding are designed for rapid mounting. They provide high dynamic and static strength and can be load
from any direction with approved safety (safety factor 4) for all loading directions. The spring steel tape (Type F) holds the ring in any
position and dampens any noise caused by vibrations. All parts are undetachably connected.
The two support lugs improve the bearing of hooks and enhance the support effect in the event of oblique suspension rings. Load rings
GN 587.1 comply with Mechanical Engineering Directive 2006 / 42 / EG.
Types
- Type A: without retaining spring
- Type F: with retaining spring
Material:
Ring brackets in forged Steel, 1.6541, high-tensile tempered and 100 % electro magnetic tensile tested to EN 1677
With oink plastic coating
Weld-on block in forged, blank, Steel, S355 J2 + N (ST52-3N), high-tensile tempered and 100 % electro magnetic tensile tested to EN 1677
Retaining spring in Stainless Steel tape, rustproof
Elesa+Ganter GN 1130 Lifting pin
Stud, shackle: Heat-treated steel, manganese phosphated.
Push button: Aluminium, red anodized.
Spring: Stainless Steel.
Lifting pins GN 1130 are carrier elements designed for fast and easy use. Pressing the red aluminium button will release the locking effect of the locking ball, allowing the load bolt to be moved in or out of the holding bore hole. The shackle rotates by at least 180°, with a safety flange fitted as a safeguard against inadvertent operation. Depending on the direction of pull, the ball load bolt may move freely by 360° in the holding bore hole.Sling and lifting gear permanently remaining at the workpiece (e.g. load rings) is no longer necessary. Holding bore holes with d1 H11 are sufficient in use.
Elesa+Ganter GN 1130-NI Lifting pin
Stud: AISI 630 Stainless Steel, age hardened.
Shackle: AISI 316Ti Stainless Steel. Push button: Aluminium, red anodized. Spring: Stainless Steel. Special executions on request - other diameter d1. - other lengths l1. Features and applications Lifting pins GN 1130 are carrier elements designed for fast and easy use. Pressing the red aluminium button will release the locking effect of the locking ball, allowing the load bolt to be moved in or out of the holding bore hole. The shackle rotates by at least 180°, with a safety flange fitted as a safeguard against inadvertent operation. Depending on the direction of pull, the ball load bolt may move freely by 360° in the holding bore hole.Sling and lifting gear permanently remaining at the workpiece (e.g. load rings) is no longer necessary. Holding bore holes with d1 H11 are sufficient in use.
Elesa+Ganter GN 5860 Load ring
Chain ring/Eye ring: High-tensile forged tempered steel, German Material No. 1.6540 with pink plastic surface coating, 100% electro-magnetic tensile tested to EN 1677.
Bearing case: High-tensile forged tempered steel, German Material No. 1.6540 zinc-plated, blue passivated, 100% electro-magnetic tensile tested.
Screw: Steel, Tensile strength class 10.9 (1000 N/mm²), finish Delta Tone.
Elesa+Ganter GN 589 Lifting point
Material: High-tensile forged tempered steel 1.6541, 100% electro-magnetic tensile tested to EN 1677, phosphated.
Elesa+Ganter DIN 444 Eye screw
Specification: Black-oxide steel, class 5.8 (tensile strength 500 N/mm²).
Elesa+Ganter DIN 444-NI Eye screw
Specification: Stainless Steel AISI 303
Elesa+Ganter GN 1524 Eye screw with long tread
Specification
- Tensile strength class 5.8
Elesa+Ganter GN 1524 Eye screw with long tread
Specification: Stainless Steel NI AISI 303
Elesa+Ganter GN 933.5 Hexagonal head grub screw
Hexagon head screw: AISI 304 stainless steel (A2).
Standard versions available
- Version MS: brass pivot.
- Version KU: plastic privot (Polyacetal POM).
- Version ZK: spherical pivot.
Elesa+Ganter GN 444.2 Eye nut
Material: Black-oxide steel, class 5.8 (tensile strength 500 N/mm²).
Elesa+Ganter DIN 582/DIN 582-NI lifting eye bolt with female thread
Material
- DIN 582 ST: Forged steel annealed body, zinc-plated blue passivated, machined contact face.
- Version NI: Drop-forged stainless steel A2, machined contact face.
- Version A4: Drop-forged stainless steel A4, machined contact face.
Elesa+Ganter DIN 580/DIN 580-NI lifting eye bolt
Material
- Version ST: Forged steel annealed body, zinc-plated blue passivated, machined contact face.
- Version NI: Drop-forged stainless steel A2, machined contact face.
- Version A4: Drop-forged stainless steel A4, machined contact face.
Elesa+Ganter GN 709.1 Clamping pad
Material: Case tempered phosphate-treated steel.
Ball: Blank hardened steel.
Hexagon nut: Black-oxide steel according to ISO 4035 (DIN 439).
Standard versions available:
- Version B: smooth contact face.
- Version R: serrated contact face.
Elesa+Ganter GN 709.1 Clamping pad
Material: Case tempered phosphate-treated steel.
Ball: Blank hardened steel.
Standard versions available
- Version B: smooth contact face.
- Version R: serrated contact face.
Elesa+Ganter GN 709.2 Clamping pad
Material: Case tempered phosphate-treated steel.
Ball: Blank hardened steel.
Standard versions available
- Version B: smooth contact face.
- Version R: serrated contact face.
Elesa+Ganter GN 965 Assembly sets for profile systems 30/40 with T-Nuts GN 506
Material: Zinc-plated Steel, blue passivated.
Ball: Stainless Steel.
Spring: Stainless Steel.
Standard versions
- Type A: with cylinder head screw DIN 912, zinc plated, blue passivated.
- Type B: with countersunk screw DIN 7991, zinc plated, blue passivated.
- Type C: with lens screw ISO 7380, zinc plated, blue passivated.
- Type D: with cylinder head screw DIN 7984, zinc plated, blue passivated.
Elesa+Ganter GN 968 Assembly sets for profile systems 30/40/45 with T-nuts GN 505
Material: Zinc plated Steel, blue passivated.
GN 505 with increased torque (Type MB).
Ball/Spring: Stainless Steel.
Standard versions
- Type A: with cylinder head screw DIN 912, zinc plated, blue passivated.
- Type B: with countersunk screw DIN 7991, zinc plated, blue passivated.
- Type C: with lens screw ISO 7380, zinc plated, blue passivated.
- Type D: with cylinder head screw DIN 7984, zinc plated, blue passivated.
Elesa+Ganter GN 505.4 Quick-insert dowels for T-slots
Material: Steel zinc, plated, blue passivated.
Elesa+Ganter GN 505.5 Quick-insert dowel for T-slots
Material: AISI 304 stainless steel.
Elesa+Ganter DIN 787 T-slot bolt
Material: Blank steel, class 8 (tensile strength 800 N/mm²).
Elesa+Ganter GN 230 Shallow T-nut
Material: Ground and hardened black-oxide steel body.
Elesa+Ganter GN 505 Quick-insert dowel for T-slot
Versions:
- Execution MB: zinc-plated steel, with increased torque.
- Execution OB: zinc-plated steel, without increased torque.
Elesa+Ganter GN 506 T-nut with guide step
Material: Zinc-plated steel.
Ball/Spring: Stainless steel.
Elese+ganter CMC Torque amplifier collar
Bearing case material
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
Standard executions
- CMC: AISI 52100 steel axial bearing, zinc-plated steel washers.
- CMC-SST:AISI 440 C stainless steel axial bearing, AISI 303 stainless steel washers.
Features and applications
Used in combination with clamping levers ERX., ERW., MRX., ERF., clamping knobs type VCT.SOFT or
handles type L.652, CMC torque amplifier collars double the clamping force applied at equal torque due
to the presence of a bearing acting to reduce friction.
Elesa+Ganter GN 506.1 Dowel for T-slot with no-slip device
Material: Zinc-plated steel.
Ball/Spring: Stainless steel.
Elesa+Ganter GN 506.2 Dowel for T-slot with guide and no-slip device
Material: Zinc-plated steel.
Spring washer: AISI 301 stainless steel, spot-welded.
Elesa+Ganter GN 507 Dowel for T-slot
Material: Zinc-plated steel.
Elesa+Ganter DIN 508 T-nut
Material
- Version 8: blank steel, class 8 (tensile strength 800 N/mm²).
- Version 10: black-oxide steel, class 10 (tensile strength 1000 N/mm²).
Elesa+Ganter DIN 508-NI T-nut in st. steel
Material: AISI 303 stainless steel.
Elesa+Ganter GN 508.1 Rhombus T-nut
Material: Black-oxide steel, class 10 (tensile strength 1000 N/mm2).
Elesa+Ganter GN 508.2 T-nut
Material
- Execution 8: zinc plated hardened steel, class 8 (tensile strength 800 N/mm2).
- Execution 10: black oxide hardened steel, class 10 (tensile strength 1000 N/mm2).
Elesa+Ganter DIN 6379 Stud for T-nut
Specification
M6 ... M12: Tensile strength class 10.9 (1000 N/mm²)
M14 ... M24: Tensile strength class 8.8 (800 N/mm²) blackened
Elesa+Ganter GN 9190.2 Side Clamps with Clamping Thread and Support.
With side clamps GN 9190.2, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it against fixed stops and the supporting surface.
Types
- Type E: With serrated clamping jaw
- Type P: With prism clamping jaw
Coding
- Type G: Clamping stroke with ball point screw
- Type K: Clamping stroke with adjustable hand lever
Materials
- Steel, see datasheet below for full overview.
Elesa+Ganter GN 3490 Threaded flange
Specification: Steel fine casting
- zinc plated, blue passivated ZB
- zinc plated and plastic coated
black, RAL 9005, textured finish SW
Elesa+Ganter GN 347 Hexagon nut with levelling base
Base: Black-oxide steel.
Nut: Black-oxide steel.
Elesa+Ganter DIN 6330 Hexagon nut
Material: Black-oxide steel class 10 (tensile strength 1000 N/mm2).
Elesa+Ganter DIN 6330-NI stainless steel hexagon nuts
Material: AISI 303 stainless steel
Elesa+Ganter DIN 6331 Collar nut
Material: Black-oxide steel class 10 (tensile strength 1000 N/mm2).
Elesa+Ganter GN 806 Protective cap
Body: Black elastomer, hardness 85 ±5 Shore A.
Threaded insert: Zinc-plated steel (type B from D=12 to 26 mm).
Elesa+Ganter Slotted locknut DIN 1804
Executions
- H: Hardened and mating surface
- W: Not hardened, not ground
Elesa+Ganter DIN 1804-NI Slotted locknut
Material: AISI 303 Stainless steel WNI, not hardened, not grounded.
Elesa+Ganter DIN 1810 C-Spanner
Elesa+Ganter GN 184 Washer for countersunk head screw
Material: Turned and black-oxide steel.
Elesa+Ganter GN 184.5 Washer for countersunk head screws
Material: AISI 303 stainless steel, sandblasted matte finish.
Elesa+Ganter GN 185 Washer for countersunk head screw
Material: AISI 303 stainless steel, shot-blasted matte finish.
Plastic disc: Polyamide based (PA) technopolymer, white colour.
Elesa+Ganter DIN 6319 Concave / convex washer
Material: Hardened and tempered steel
Elesa+Ganter DIN 6319 Concave / convex washer
Material: AISI 303 stainless steel.
Elesa+Ganter DIN 6319-A4 Spherical washer in stainless steel
Material: AISI 316 stainless steel, not hardened.
Standard versions
- Type C: male.
- Type D: female d4 = d3.
Elesa+Ganter GN 6319.1 Levelling washer
Material: Case-hardened steel ST (hardening depth 0.2 - 0.4 mm), hardness (550 + 100) HV 10.
Spherical washers combinations GN 6319.1 provide an "undetachable" connection for male and female spherical washers GN 6319. They simply storage and allow fast and efficient installation.
Elesa+Ganter GN 6339 Washer for heavy duty applications
Material
- Version BT: case hardened black oxide steel, material-no. 1.7227, fine machined and fine ground, tensile strength Rm = 1220 - 1400 N/mm2.
- Version GO: case hardened steel treated GEOMET 500, material-no. 1.7227, fine machined and fine ground, tensile strength Rm = 1220 - 1400 N/mm2.
Elesa+Ganter DIN 6340 Washer
Material: Black-oxide (not deburred) quenched and tempered steel. Hardness (350 + 80) HV 30.
Elesa+Ganter GN 6341 Washer
Material: Steel ST, turned.
Finish
- Type BT: black-oxide.
- Type ZB: zinc-plated, blue passivated.
Standard versions
- Version A: with cylindrical bore.
- Version B: with bore for countersunk screw.
Elesa+Ganter GN 6341-NI Stainless steel washer
Material: AISI 303 stainless steel NI, turned.
Finish: Matte blasted, MT.
Standard versions
- Type A: with cylindrical bore.
- Type B: with bore for countersunk screw.
Elesa+Ganter GN 6343 Washer / Levelling disc
Made from stainless steel AISI 304, turned, blank
Elesa+Ganter DIN 6371 Captive C-shaped washer with flat shoulder screw
Material: Tempered black-oxide steel body with DIN 923 flat shoulder screw in black-oxide steel.
Elesa+Ganter GN 183 C-shaped washer
Material: Case-hardened and black-oxide steel.
The GN 18 C disc transfers a screw or nut clamping force to the item.
When the thread is loosened, the disc can be pulled out of the buckle area.
Elesa+Ganter GN 6342 friction bearing
Material: Steel ST, blackened.
Sliding disk: Plastic Polyamide 46, glasfibre reinforced. Temperature resistant up to 120 °C. Slightly greased (PTFE-mounting grease).
Elesa+Ganter GN 6342-NI friction bearing in stainless steel
Material: AISI 303 stainless steel.
Sliding disk: Plastic Polyamide 46, glasfibre reinforced. Temperature resistant up to 120 °C. Slightly greased (PTFE-mounting grease).
Elesa+Ganter GN 338 Disc with protection cap
Disc: Zinc-plated steel.
Cover cap
- Version KS: acetal resin based (POM) technopolymer, RAL 9001 white colour. Resistant to solvents, oils, greases and other
chemical agents.
- Version KR: thermoplastic elastomer (TPE), 78 Shore
Elesa+Ganter GN 346 Thrust pad with ball joint and threaded hole
Material: Zinc-plated steel, class 5.8 (tensile strength 500 N/mm²).
Elesa+Ganter GN 187.1/GN 187.1-NI guide pot
Material
- GN 187.1: Black-oxide steel.
- GN 187.1-NI: AISI 303 stainless steel.
Elesa+Ganter GN 187.2 Push spring in stainless steel
Material: AISI 301 stainless steel.
Elesa+Ganter GN 187.4/GN 187.4-NI Serrated locking plate
Material
- GN 187.4: Sintered Steel, hardened, black oxidised with vapor, ST
- GN 187.4-NI: AISI 316 LHC Stainless Steel, NI
Version
- Type A: with tapped hole d3 in the center, with two countersunk holes d5 for cap screws.
- Type B: with drilling d4 in the center, with two countersunk holes d5 for cap screws.
- Type C: with tapped hole d3 in the center, with two tapped mounting holes d6.
- Type D: with drilling d4 in the center, with two tapped mounting holes d6.
- Type E: without drillings, blank, not hardened.
Elesa+Ganter GN 187.5 Stainless Steel-Locking plates.
GN 187.5 can be installed in combination with locking joint sets GN 187.6 to create locking joints. This allows gear lever handles and retaining tubes or trays and mounts to be adjusted relative to each other at defined angles with a form-locking connection. The angle orientation of the teeth is adapted to the connecting elements, permitting an axis-parallel or right-angled arrangement. Held together and centered by locking joint sets, the various types can be combined together arbitrarily with identical the nominal sizes d1. Stainless Steel-Thrust springs GN 187.2 can be placed between the locking heads during mounting, allowing a clean separation upon removal. Additional design possibilities arise from the compatibility of the locking heads with the locking plates GN 187.4 . When welding on, type E be easily positioned on the opposing part and fastened by means of the mounting holes d8 (which are aligned with the teeth) using dowel pins or positioning pins.
Types:
Type A: Stud, unthreaded (for welding on)
Type B: Stud, with female thread
Type C: Stud, with male thread
Type DH: Fastening flange, horizontal
Type E: Plate (for welding on)
Material:
Stainless Steel precision casting AISI CF-8
matte shot-blasted
Elesa+Ganter GN 187.6 Locking joint set.
Can be used to combine Stainless Steel-Locking heads GN 187.5 to form locking joints.
Thanks to the hexagonal shoulder, which creates a form-locking connection that prevents the part from also turning, the centering threaded bushing allows fast and easy mounting.
In the unlocked state, it forms the axis that positions the locking heads center to center.
The use of Stainless Steel-Thrust springs GN 187.2 allows the locking heads to be cleanly separated from each other.
Type K is used in applications requiring frequent and tool-free adjustment of the locking joints.
The parts of the respective type are delivered loose in the set.
Types:
Type K: with adjustable hand lever
Type S: with socket head cap screw DIN 912
Material:
Handle in Zinc die casting, Plastic coated in silver, RAL 9006, textured finish.
Threaded insert and retaining screw in Stainless Steel AISI 303.
Socket head cap screws DIN 912 in Stainless Steel A2.
Centering threaded bushing in Stainless Steel AISI 304
Washer in Stainless Steel A2
Elesa+Ganter GN 418.2 cam point screw
Specifications:
Steel
- case hardened HRC 56 ±1
- Tensile strength class 8.8 (800 N/mm2)
- zinc plated, blue passivated
Cam point screws GN 418.2 are sturdy and compact elements, requiring a minimum of installation space and offering ultimate convenience and ease in handling.
Elesa+Ganter GN 605 Grub screws with ball terminal
Material: Black-oxide steel, hexagon socket head.
Ball: Hardened steel.
- Type AN: full ball for applications requiring a single contact point.
- Type BN: reversible flat-faced ball for fitting non-parallel surfaces.
- Type VN: non-reversible flat-faced ball.
- Type VRN: non-reversible knurled flat-faced ball.
Maximum ball plane inclination for flat-faced balls = 9°.
Elesa+Ganter GN 605 Grub screws with ball terminal
Material: AISI 304 stainless steel, hexagon socket head.
Ball: Hardened steel.
- Type AN: full ball for applications requiring a single contact point.
- Type BN: reversible flat-faced ball for fitting non-parallel surfaces.
- Type VN: non-reversible flat-faced ball.
- Type VRN: non-reversible knurled flat-faced ball.
Maximum ball plane inclination for flat-faced balls = 9°.
Elesa+Ganter GN 913.2 Grub screw
Screw made from steel, blackened.
Nose
- Execution A: steel, hardened and spherical.
- Execution B: steel, hardened and pointed.
Elesa+Ganter GN 913.3 grub screw and GN 913.5 Grub screw in stainless steel
GN 913.3:
Material: Black-oxide steel, class 5.8 (tensile strength 500 N/mm²), hexagon socket head.
Bolt:
- Version KU: acetal resin based (POM) technopolymer, natural colour.
- Version MS: brass.
GN 913.5
Material: AISI 303 stainless steel, hexagon socket head.
Bolt:
- Version KU: acetal resin based (POM) technopolymer, natural colour.
- Version MS: brass.
Elesa+Ganter GN 606 Set screws with ball terminal
Material: Black-oxide steel, hexagon socket head.
Ball: Hardened steel.
- Type AN: full ball for applications requiring a single contact point.
- Type BN: reversible flat-faced ball for fitting non-parallel surfaces.
- Type VN: non-reversible flat-faced ball.
- Type VRN: non-reversible knurled flat-faced ball.
Maximum ball plane inclination for flat-faced balls = 9°.
Elesa+Ganter GN 606-NI Set screws with ball terminal
Material: AISI 304 / AISI 440C stainless steel, hexagon socket head.
Ball: Hardened stainless steel.
- Type AN: full ball for applications requiring a single contact point.
- Type BN: reversible flat-faced ball for fitting non-parallel surfaces.
- Type VN: non-reversible flat-faced ball.
- Type VRN: non-reversible knurled flat-faced ball.
Maximum ball plane inclination for flat-faced balls = 9°.
Elesa+Ganter GN 732 Shoulder screw with collar
Material: Class 5.8 steel, hardened all round (hardening depth 0.2 - 0.4 mm). Tensile strength 500 N/mm2.
Stainless Steel NI
AISI 303
Elesa+Ganter GN 1132 Bushes for lifting pin
Bush: AISI 630 Stainless Steel, precipitation hardened.
Type A: with external hexagon. Special executions on request other lengths (l1, l2, l3) and other threads (d3)
Holding bushes GN 1132 are used in connection with lifting pins GN 1130. The length l1 of the holding bush should be equal to length l1 of the lifting pin in order to reach the load specification given in the table for GN 1130 at plug-in length x.
Holding bushes are intended to remain permanently at workpiece, creating a place-saving alternative to load rings or similar.
Elesa+Ganter GN 912.2 captive socket cap screw.
Captive socket cap screws GN 912.2 can be used to prevent loss of the thumb screw, due to the d3 recessed portion of the stud which is shown in the datasheet.
Depending on the design and required clamping length (a1-a3) of the component being attached, there are a number of assembly options shown in the datasheet.
Material: Stainless Steel AISI 304 (A2)
Elesa+Ganter ISO 7379 Shoulder screw with collar
Material: Black-oxide steel class 12.9 (tensile strength 1200 N/mm2)
Adapter dimension d1 ground.
Elesa+Ganter DIN 6320 Foot
Material: Black-oxide steel, not hardened.
Elesa+Ganter GN 409.1 Positioning element
Material: Black-oxide, hardened steel.
Standard versions
- Type B: smooth contact face.
- Type K: spherical contact face.
- Type R: serrated contact face.
Elesa+Ganter GN 409.2 Positioning element
Material: Black-oxide, hardened steel.
Standard versions
- Type B: smooth contact face.
- Type K: sphercial contact face.
- Type R: serrated contact face.
Elesa+Ganter GN 771.1 Guide pin
Material: Hardened steel (HRC 60 ± 2), fit sizes ground.
Guide pins GN 771.1 are normally used in combination with DIN 172 / DIN 179 guide bushes. The shaft tolerance p6 guarantees a perfect pressfit in a mounting borehole H7; the attachment lug l3 makes the installation easier.
Elesa+Ganter DIN 6321 Positioning element
Material
Black-oxide, hardened steel.
Standard versions
- Type A: Headed dowel, low, without centre hole.
- Type B: Workholding bolt, high, cylindrical, with centre hole.
- Type C: Workholding bolt, high, flattened, with centre hole.
Elesa+Ganter GN 6321.1 Headed dowel
Material: Hardened steel.
Elesa+Ganter GN 6322 Machine and positioning element
Material: Hardened steel.
Standard versions
- Type B: Workholding bolt cylindrical.
- Type C: Workholding bolt flattened.
Elesa+Ganter DIN 172 and DIN 179 Guide bushing.
Material: Ground and hardened steel (HRC 60 ± 2).
For applications involving positioning, we recommend the combination with the GN 771.1 guide pins.
Elesa+Ganter centring bore clamps GN 411.2
Versions
- Type K: With clamping balls
- Type S: With clamping segments
Workpieces can be centrally positioned and clamped from the inside of the bore.
GN 411.2 offers the following advantages: - Precise self centering - Repetitive accuracy: ± 0,025 - Accuracy of concentricity: ± 0,05 - Solid and stable clamping through either 3 or 6 contact points on the workpiece - Clamping of workpieces with uneven or irregular surface (such as castings) - Distortion free clamping - Reduced height - Can be fitted in any position - Large adjustable range - Draw-down clamping
Elesa+Ganter GN 251 Setting bolt
Material
- Black-oxide steel bolt with hardened hexagon head (type AK).
- Nickel plated steel bolt with Polyurethan disc (type BK).
Locking nut: Steel zinc plated, blue passivated.
Elesa+Ganter GN 704 Quick release set collar
Material:
- Ring: Aluminium, black anodised.
- Lever: Aluminium, yellow anodised.
Elesa+Ganter GN 705 positioning ring for screw assembly according to DIN 705.
Executions:
- Version A: Grub screw with screwdriver slotted head ISO 7434 (DIN 553)
- Version E: Grub screw with hexagon socket, ISO 4027 (DIN 914)
Rings with d=75 and 80 mm are provided with two grub screws.
Material: Black-oxide steel.
Elesa+Ganter GN 705 positioning ring for screw assembly according to DIN 705.
Executions:
- Version A: Grub screw with screwdriver slotted head ISO 7434 (DIN 553)
- Version E: Grub screw with hexagon socket, ISO 4027 (DIN 914)
Rings with d=75 and 80 mm are provided with two grub screws.
Material: Stainless steel AISI 303.
Elesa+Ganter GN 706.2 Semi-split set collar
Material
- Black-oxide sintered steel ST.
- Aluminium ground AL.
Elesa+Ganter GN 706.3 Set collar for threaded shafts
Material: Black-oxide sintered steel ST.
Socket head cap screw: Steel grub screw, blank, cylindrical head with hexagon socket, supplied assembled.
Elesa+Ganter GN 706.3-NI Threaded set collar in stainless steel
Material: AISI 316 LHC stainless sintered steel NI.
Socket head cap screw: AISI 304 stainless steel NI.
Elesa+Ganter GN 706.4 semi split set collar with adjustable handle
Material
- Type ST: Black-oxide with vapor sintered steel
- Type AL: Aluminium ground
Adjustable handle
- Lever body, zinc alloy die-cast, RAL 9005 black matte finish, epoxy resin coating.
- with setting screw AISI 303 Stainless Steel.
Semi-split set collars GN 706.4 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft. For size d1= 32 and 36, d3 is a through hole; starting from d1= 42 d3 is a threaded blind bore. These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.
Elesa+Ganter GN 706.4-NI semi split set collar in stainless steel with adjustable handle.
Material: AISI 316 L stainless sintered steel NI.
Adjustable handle:
- Lever body, zinc alloy die-cast, RAL 9005 black matte finish, epoxy resin coating.
- with setting screw AISI 303 Stainless Steel.
Can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft. These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.
Elesa+Ganter GN 707.2 split set collar
Material ST: Black-oxide sintered steel ST.
NI: Stainless steel
Shaft tolerance = h11.
Split set collars GN 707.2 are used when the latter cannot be slipped over a shaft. These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.
Can be delivered in A4-stainless steel in certain sizes (see datasheet).
Elesa+Ganter GN 826 Clamping element with adjustable hand levers GN 302-30
Material: Aluminium, anodized black ELS.
Wedge: Adjustable hand levers GN 302-30
-Lever body, zinc alloy die-cast, RAL 9005 black matte finish, epoxy resin coating.
- with setting screw AISI 303 Stainless Steel.
Standard versions
- Type H: Clamping screw with adjustable handle.
- Type S: Clamping screw with internal hexagon.
Elesa+Ganter GN 928/GN 928.1 Clamping element for round cross section shafts
Material: Body in black-oxide steel.
Cap screw: DIN 912, zinc-plated steel.
GN 928 shaft clamping units are used to clamp economically and rapidly round workpieces from 6 to 125 mm. For the application of GN 928 on large holders and away from the outside edge, spacers or special bolts are available.
Elesa+Ganter GN 918/918.5 cam locking lever
Assembly
- Type KV: with ball lever, angular (serrations).
- Type SK: with hexagon.
- Version R: clockwise rotation (drawn version).
- Version L: anti-clockwise rotation.
Made from bronzed steel or stainless steel
Elesa+Ganter GN 918.1/GN 918.6 Cam locking lever
GN 918.1
Lever: Black-oxide steel.
Ball knob: DIN 319 Duroplast, shiny finish.
Screw: Nitrided and black-oxide steel, hexagon socket head.
Cam and washer: Case hardened and black-oxide steel.
GN 918.6
Lever: AISI 303 stainless steel, shot-blasted matte finish.
Ball knob: DIN 319 Duroplast, shiny finish.
Screw: AISI 420 stainless steel, hexagon socket head.
Cam and washer: AISI 303 tempered stainless steel chemically nickel-plated.
Versions:
- Type KV: With ball lever, angular (serrations)
- Type SK: With hexagon
- Version R: Clockwise rotation
- Version L. Anti-clockwise rotation
Clamping bolts GN 918.1 and GN 918.6 are fitted with a rotating helix. They allow rapid and safe clamping and releasing with a relatively long movement and high clamping force. The small rising angle of the helix makes it self-arresting. The ball handle is linked with the clamping mechanism via a serrated ratchet thus allowing an individual positioning of the hand
lever. Bolt and washer are matched to allow an effortless release from the clamped position. The washer "saves" special requirements to the execution of the female thread and the clamping bolt can therefore also be used on T-Nuts on machine beds.
Clamping bolts offer the advantage that they can be rotated away from the clamping area after release. Clamping bolts can also be used as stepless adjustable end stops. If the washer is removed the bolt can be clamped direct to its support.
Spherical clamping bolt GN 605 are recommended for use with these clamping bolts.
Elesa+Ganter GN 918.2/GN 918.7 Cam locking lever
GN 918.2
Lever: Black-oxide steel.
Ball knob: DIN 319 Duroplast, shiny finish.
Screw: Nitrided and black-oxide steel, hexagon socket head.
Cam and washer: Case hardened and black-oxide steel.
GN 918.7
Lever: AISI 303 stainless steel, shot-blasted matte finish.
Ball knob: DIN 319 Duroplast, shiny finish.
Screw: AISI 420 stainless steel, hexagon socket head.
Cam and washer: AISI 303 tempered stainless steel chemically nickel-plated.
Versions:
- Type KV: With ball lever, angular (serrations)
- Type SK: With hexagon
- Version R: Clockwise rotation
- Version L. Anti-clockwise rotation
Cam locking levers GN 918.2 and GN 918.7 are fitted with a rotating helix. They allow rapid and safe clamping and releasing with a relatively long movement and high clamping force. The small rising angle of the helix makes it self arresting. The ball handle is linked with the clamping mechanism via a serrated ratchet thus allowing an individual positioning of the hand lever. Bolt and washer are matched to allow an effortless release from the clamped position. The washer "saves" special requirements to the execution of the female thread and the clamping bolt can therefore also be used on T-Nuts on machine beds.
Clamping bolts offer the advantage that they can be rotated away from the clamping area after release. Cam locking levers can also be used as stepless adjustable end stops. If the washer is removed the bolt can be clamped direct to its support.
Spherical clamping bolt GN 605 are recommended for use with these clamping bolts.
Elesa+Ganter GN 917 Double cam lever
Material: Black-oxide steel, ST52-3.
King pin: Tempered AISI 420 stainless steel.
Circlip: AISI 301 stainless steel.
Plastic handle sleeve: Red colour, oil resistant. Max working temperature 60°C.
GN 917 are used for repositioning and clamping operations. The eccentric cam is designed in such a way that the clamping force remains constant in every position of its action. It is self-locking.
Elesa+Ganter GN 917.1 Double cam lever
Material: AISI 304 stainless steel, sandblasted matte finish.
King pin: Tempered AISI 420 stainless steel.
Circlip: AISI 301 stainless steel.
Plastic handle sleeve: Red colour, oil resistant. Max working temperature 60°C.
GN 917.1 is used for repositioning and clamping operations. The eccentric cam is designed in such a way that the clamping force remains constant in every position of its action. It is self-locking.
Elesa+Ganter GN 252 Blanking plug
Type
- Type A: without micro encapsulation
- Type PRB: with thread coating(polyamide allround coating)
Material: Steel, tensile strength class 5.8 (500N/mm2)
Elesa+Ganter GN 418.1 Cam point lever
Material: Lever in bBlack-oxide steel.
Handle: Plastic ball knob DIN 319, black colour.
Thread/Cam: Black oxide steel, case hardened all around, HRC 56 ±1.
Standard versions available
- Type R: clamping by clockwise turn (d2 = right-hand thread).
- Type L: clamping by anticlockwise turn (d2 = left-hand thread).
Cam point screws GN 418.2 are sturdy and compact elements, requiring a minimum of installation space and offering ultimate convenience and ease in handling.
Elesa+Ganter GN 919 Hub with eccentric cam
GN 919 hubs with eccentric cam are used for adjusting and clamping operations.
Material: Sintered and case-hardened black-oxide steel.
Elesa+Ganter GN 350 / GN 350-NI Levelling set
Material
- GN 350: Zinc-plated steel ST
- GN 350: AISI 303 stainless steel NI
Elesa+Ganter GN 350.1 / GN 350.1-NI Levelling set
Material
- GN 350.1: Zinc-plated steel ST
- GN 350.1-NI: AISI 303 stainless steel NI
Elesa+Ganter GN 350.2 / GN 350.2-NI Levelling set
Material
- GN 350.2: Zinc-plated steel ST.
- GN 350.2: AISI 303 stainless steel NI.
Elesa+Ganter GN 350.3 / GN 350.3-NI Levelling washer
Materiale
- GN350.3: Zinc-plated steel ST
- GN350.3-NI: AISI 303 stainless steel NI
Elesa+Ganter GN 350.5 Levelling set
Levelling sets GN 350.5 are used for levelling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.
They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.
Material: Zinc-plated steel 1.7225 (42CrMo 4 V) ST, blue passivated.
F1: max. total load.
F2: max. load after deduction of the max. preload for screws 8.8, μ = 0.125.
Elesa+Ganter GN 350.5-NI Levelling set
Material: AISI 303 (X 10 CrNiS 18-9)
F1: max. total load.
F2: max. load after deduction of the max. preload for screws 6.8, μ = 0.14.
Elesa+Ganter GN 709.15 Clamping pad
Material: AISI 431 tempered stainless steel.
Ball: AISI 420C stainless steel, nickel-plated.
Standard version
- B: smooth contact face.
Elesa+Ganter GN 709.25 Clamping pad
Material: AISI 431 tempered stainless steel.
Ball: AISI 420C stainless steel, nickel-plated.
Standard version
- Version B: smooth contact face.
Elesa+Ganter GN 709.35 Clamping pad with long thread
Material: AISI 431 tempered stainless steel.
Ball: AISI 420C stainless steel, nickel-plated.
Hexagon nut: Stainless steel according to ISO 4035 (DIN 439).
Elesa+Ganter GN 709.6 Clamping pad
Material: Case tempered steel, class 10.9 Tensile strength.
Ball: Hardened steel (54+2 HRC), Polyacetal (POM) plastic.
O-ring: NBR synthetic rubber (Perbunan).
Standard versions
- Version B: Ball steel, smooth contact face.
- Version R: Ball steel, serrated contact face.
- Version K: Ball plastic, smooth contact face.
Elesa+Ganter GN 709.7 Clamping pad
Material: Case tempered steel, class 5.8 (tensile strength 500 N/mm2).
Ball: Hardened steel (54+2 HRC), Polyacetal (POM) plastic.
O-ring: NBR synthetic rubber (Perbunan).
Standard versions
- Version B: Ball steel, smooth contact face.
- Version R: Ball steel, serrated contact face.
- Version K: Ball plastic, smooth contact face.
Elesa+Ganter GN 709.8 Clamping pad
Material: Case tempered steel, class 5.8 (tensile strength 500 N/mm2).
Ball: Hardened Steel (54+2 HRC), Polyacetal (POM) plastic.
O-ring: NBR synthetic rubber (Perbunan).
Standard versions
- Version B: Ball steel, smooth contact face.
- Version R: Ball steel, serrated contact face.
- Version K: Ball plastic, smooth contact face.
Elesa+Ganter UTB ball transfer unit.
UTB ball transfer units are particularly suitable for applications on transfer and conveyor lines or end of production lines. They facilitate both linear and rotational movements favouring maximum smoothness. The self-lubricating technopolymer structure ensures maximum cleanliness as it does not require lubrication with oils and greases.
The technopolymer ball lends itself to handling loads with delicate surfaces.
The stainless steel ball lends itself to handling loads with sharp and angular surfaces.
Furthermore, since these are corrosion-resistant materials, it is possible to wash them, even frequently.
Material:
Body in acetal-based technopolymer, white colour.
Internal support and transfer balls of the main ball in stainless steel.
Standard executions:
UTB-P: main ball in acetal-based technopolymer (POM), white colour.
UTB-SST: main ball in stainless steel.
Elesa+Ganter UTB-SST-ESD ball transfer unit.
UTB-SST-ESD ball transfer units are particularly suitable for applications on transfer and conveyor lines or end of production lines. They facilitate both linear and rotational movements favouring maximum smoothness. The special ESD conductive technopolymer prevents the accumulation of electrostatic charges. The UTB-SST-ESD ball transfer unit is therefore suitable for applications in "ESD PROTECTED AREA" (EPA) areas. The self-lubricating technopolymer structure ensures maximum cleanliness as it does not require lubrication with oils and greases. The stainless steel ball lends itself to handling loads with sharp and angular surfaces. Furthermore, since these are corrosion-resistant materials, it is possible to wash them, even frequently.
Material:
Conductive special technopolymer body, black colour. Volume resistivity <10 5 Ωcm, DIN IEC 93 test method, surface resistivity <10 5 Ω, DIN 53482 test method. Main ball in stainless steel. Internal support and transfer balls of the main ball in stainless steel.
Elesa+Ganter UTR ball transfer unit.
UTR ball transfer units are particularly suitable for applications on transfer and conveyor lines or end of production lines. They facilitate both linear and rotational movements favouring maximum smoothness. The self-lubricating technopolymer structure ensures maximum cleanliness as it does not require lubrication with oils and greases.
The soft technopolymer roller is suitable for handling loads with particularly delicate surfaces such as glass and ceramic.
Furthermore, since these are corrosion-resistant materials, it is possible to wash them, even frequently.
Material:
External body and central body for roller holder in acetal-based technopolymer, white colour.
Internal support and rotation balls of the central body in stainless steel.
Standard executions:
- UTR-P: Roller in acetal-based technopolymer, white colour.
- UTR-S: Roller in soft technopolymer, blue colour.
Elesa+Ganter UTR-S ball transfer unit.
UTR ball transfer units are particularly suitable for applications on transfer and conveyor lines or end of production lines. They facilitate both linear and rotational movements favouring maximum smoothness. The self-lubricating technopolymer structure ensures maximum cleanliness as it does not require lubrication with oils and greases.
The soft technopolymer roller is suitable for handling loads with particularly delicate surfaces such as glass and ceramic.
Furthermore, since these are corrosion-resistant materials, it is possible to wash them, even frequently.
Material:
External body and central body for roller holder in acetal-based technopolymer, white colour.
Internal support and rotation balls of the central body in stainless steel.
Standard execution:
– UTR-S: Roller in soft technopolymer, blue colour.
Elesa+Ganter GN 509 Ball transfer unit
Material, housing:
- Zinc-plated drawn sheet steel (version SBL, SKU and SNI).
- Stainless steel (version NNI).
Retaining components:
Zinc-plated steel.
Balls:
- Version SBL: zinc-plated steel.
- Version SKU: plastic.
- Version SNI: stainless steel.
- Version NNI: stainless steel.
Retaining ring
Felt seal (only for sizes D= 36 and 45).
GN 509 ball transfer units are particularly suitable on conveyer tracks. They make linear or rotary movements easier even with heavy loads.
Elesa+Ganter GN 509.1 Ball transfer unit.
Material
- Turned and zinc-plated steel (version SBL and SNI).
- Stainless steel (version NNI).
Retaining components: Zinc-plated steel.
Balls:
- Version SBL: steel.
- Version SNI: stainless steel.
- Version NNI: stainless steel.
Retaining ring: Felt seal (only for sizes D= 36, 45, 62 and 100).
Applications: GN 509.1 ball transfer units are particularly suitable on conveyer tracks. They make linear or rotary movements easier even
with heavy loads (see Technical Data).
Elesa+Ganter GN 509.4 Ball transfer unit
Material: Zinc-plated turned steel, blue passivated.
Balls: Zinc-plated steel, blank.
Elesa+Ganter GN 509.3 Spring ring for ball transfer units
Elesa+Ganter GN 753 Guide roller
Versions
- Type ZL: cylindrical.
- Type KV: convex.
- Type KK: concave.
- Type KF: wedge-shaped.
- Type KR: circular (O-ring).
Types
- Type 1: with bore.
- Type 2: with threaded stud.
Outer ring: Acetal resin based (POM) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Working temperature
0 °C to 40 °C.
Inner ring / balls: Steel, blank.
Threaded stud: Zinc plated steel.
O-ring: Rubber, NBR (Perbunan), 70 Shore A
Elesa+Ganter GN 408.1 positioning elements with threaded stud.
GN 408.1 are used in device and tool construction for mounting and positioning workpieces. They can also be used as stops, thrust pieces or feet. Type G is especially suited for applications in which the height of the supporting surfaces must be as precise as possible. On uneven or inclined surfaces, such as unmachined parts, the curved supporting surface of type K offers particular advantages.
Types:
Type B: Smooth contact face, turned
Type G: Smooth contact face, ground
Type K: Spherical contact face, turned
Material:
Steel ST, case hardened, blackened
Elesa+Ganter GN 240 Quick-fit coupling
Material: Steel.
Version A: With male thread
Version B: With female thread
Elesa+Ganter GN 240.1 Quick-fit coupling
Material: Steel.
Version A: With male thread
Version B: With female thread
Elesa+Ganter GN 240.2 Quick-fit coupling
Material: Coupling in Steel and spring in stainless steel.
E+G GN1050 Quick release couplings position and connect components without tools using studs GN 1050.1 for a tight and repeatable fit.
Types:
Type A: With threaded stud
Type I: With internal thread
Coding:
F: Fixed bearing
L: Floating bearing
Material:
Housing in Aluminum, Black anodized ASS
- Closure mechanism in Steel, tempered, Zinc plated, blue passivated
- Fastening bushing (type I) in Stainless steel AISI 431, tempered
- Mounting screw (type A) Socket cap screw DIN 7984, Property class 8.8
- Other screws in Steel, zinc plated, blue passivated
- Other parts in Stainless steel
Operating temperature -30 °C to 120 °C
Studs GN 1050.1 position and attach components without tools using quick release couplings GN 1050 for a tight and repeatable fit. The dimensions and material properties of the studs have been precisely adapted to the couplings to ensure proper functionality.
Types:
- Type A: With threaded stud
- Type I: With internal thread
Material:
- Steel ST, tempered, Zinc plated, blue passivated
Flanges GN 1050.2 are available as accessories for mounting quick release couplings GN 1050 and studs GN 1050.1 (see page ) to expand the attachment options of both fastening elements.
Coding
F: Fixed bearing
L: Floating bearing
Material
- Steel ST, Zinc plated, blue passivated ZB
- Countersunk screw DIN 7991, Steel, property class 8.8 Zinc plated, blue passivated
Elesa+Ganter lead screw shafts in steel or stainless steel.
Threaded shafts with single-start trapezoidal thread, right-hand tightening direction. NSL threaded shafts form, together with NSF nuts, a structured system for converting rotation into linear motion.
Standard executions
- NSL-A: steel.
- NSL-SST: stainless steel.
Special executions on request
- Threaded shafts with different threads.
- Threaded shafts with different lengths.
- Threaded shafts in different material.
- Threaded shafts with left-hand tightening direction.
- Threaded shafts with multi-start threads.
E+G NSF-W nuts for E+G NSL Lead screw.
NSF is used together with NSL screws form a system for converting rotation into linear motion
Material:
- Polyamide-based self-lubricating technopolymer, in beige colour.
Special executions on request:
- Nuts with different sizes and threads
- Nuts in high temperature resistant technopolymer
- Nuts with left-hand tightening direction
- Nuts with multi-start threads
E+G NSF-F nuts for E+G NSL Lead screw. NSF is used together with NSL screws form a system for converting rotation into linear motion
Material:
Acetal resin based self-lubricating technopolymer, produced from FDA compliant raw material (FDA EU 10/2011), in white colour.
Special executions on request:
- Nuts with different sizes and threads
- Nuts in high temperature resistant technopolymer
- Nuts with left-hand tightening direction
- Nuts with multi-start threads
Elesa+Ganter GN 632.1 and GN 632.5 Grub screw with spherical end
Material:
GN 632.1 - Black-oxide steel, class 5.8 (tensile strength 500 N/mm²), hexagon socket head.
GN 632.5 - AISI 303 stainless steel, hexagon socket head.
Elesa+Ganter DIN 6332 Grub screw
Material: Black-oxide steel, class 5.8 (tensile strength 500 N/mm²), hexagon socket head.
- Execution SK: with hardened nose.
- Execution SKN: with not hardened nose.
Elesa+Ganter DIN 6311 Thrust pad with retaining ring
Material: Turned and hardened steel.
Retaining ring: Steel spring wire.
Elesa+Ganter DIN 6311.1 Thrust pad with retaining ring
Material: Black-oxide steel.
Version
Type A - without support.
Type K - with support in acetal resin based (POM) technopolymer, natural colour.
Maximum working temperature: 100°C.
Elesa+Ganter GN 631 Technopolymer thrust pad
Material: Acetal resin based (POM) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Colour: Black, matte finish.
Elesa+Ganter GN 711 Ruler
Material
- Stainless steel NI, 0.6 thickness, scale etched.
- Plastic KUS, highlighted in silver, 0.3 thickness, scale printed.
- Plastic KUT, transparent, 0.3 thickness, scale printed.
Standard versions available
- Version W: figures horizontally arranged.
- Version S: figures vertically arranged.
With self-adhesive
Benifits for you as a customer at Brd. Klee
Benifits for you as a customer at Brd. Klee
