E+G Swivel clamps

E+G GN 131 Swivel clamp

Elesa+Ganter GN 131 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
- Version NI: AISI CF-8 stainless steel, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 132 Swivel clamp

Elesa+Ganter GN 132 Swivel clamp
Material: Aluminium.
Finish: - Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted. Clamping screws
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 133 Swivel clamp

Elesa+Ganter GN 133 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 134 Tube Connector

Elesa+Ganter GN 134 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 141 Tube Connector

Elesa+Ganter GN 141 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 145 Swivel clamp

Elesa+Ganter GN 145 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 146 Swivel clamp

Elesa+Ganter GN 146 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 146.3 Swivel clamp

Elesa+Ganter GN 146.3 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 147 Tube Connector

Elesa+Ganter GN 147 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 162 Swivel clamp

Elesa+Ganter GN 162 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 163 Swivel clamp

Elesa+Ganter GN 163 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 165 Tube Connector

Elesa+Ganter GN 165 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 166 Tube Connector

Elesa+Ganter GN 166 Tube connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 167 Tube Connector

Elesa+Ganter GN 167 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 171 Tube Connector

Elesa+Ganter GN 171 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 191 Swivel clamp

Elesa+Ganter GN 191 Tube Connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 192 Swivel clamp

Elesa+Ganter GN 192 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 193 Tube Connector

Elesa+Ganter GN 193 Tube connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 194 Tube Connector

Elesa+Ganter GN 194 Tube connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification : with clamping screw DIN 912 and nut DIN 985, zinc-plated.

E+G GN 195 Tube Connector

Elesa+Ganter GN 195 Tube connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.

E+G GN 231 Tube support

Elesa+Ganter GN 231 Tube support
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 241 Tube support

Elesa+Ganter GN 241 Tube support
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 242 Tube support

Elesa+Ganter GN 242 Tube support
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 271 Swivel clamp

Elesa+Ganter GN 271 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 272 Swivel clamp

Elesa+Ganter GN 272 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 273 Swivel clamp

Elesa+Ganter GN 273 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 274 Swivel clamp

Elesa+Ganter GN 274 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 275 Swivel clamp

Elesa+Ganter GN 275 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 276 Swivel clamp

Elesa+Ganter GN 276 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.

E+G GN 277 Swivel clamp

Elesa+Ganter GN 277 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 278 Swivel clamp

Elesa+Ganter GN 278 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 281 Swivel clamp

Elesa+Ganter GN 281 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 282 Swivel clamp

Elesa+Ganter GN 282 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.

E+G GN 283 Swivel clamp

Elesa+Ganter GN 283 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 284 Swivel clamp

Elesa+Ganter GN 284 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version NI: Stainless teel
- Version BL: blank, matte shot-blasted.

E+G GN 285 Swivel clamp

Elesa+Ganter GN 285 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.

E+G GN 286 Swivel clamp

Elesa+Ganter GN 286 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.

E+G GN 287 Swivel clamp

Elesa+Ganter GN 287 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.

E+G GN 288 Swivel clamp

Elesa+Ganter GN 288 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.

E+G GN 271.4 Sensor holders

Elesa+Ganter GN 271.4 Sensor holders
Material: Aluminium.
Finish, Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 272.4 Sensor holders

Elesa+Ganter GN 272.4 Sensor holders
Material: Aluminium.
Finish, Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 273.4 Sensor holders

Elesa+Ganter GN 273.4 Sensor holders
Material: Aluminium.
Finish, Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 990 pipes

Elesa+Ganter GN 990 Pipes
Material:
- Steel ST, zinc-plated ZB, blue passivated.
- Aluminium AL, blank BL, untreated.
- Aluminium AL, anodised EL, natural colour.
Construction tubings GN 990 can be supplied in any length up to 3000 mm. The tolerances specified for the outside diameter of the round construction tubings comply with the requirements for split mono-block connector clamps. Otherwise the tolerances comply with DIN 2391, DIN 2395 and DIN 2462. Two-piece connector clamps allow obviously larger tolerances on round and square construction tubings.
Accessories:
- Tube end plugs GN 991.
- Insert bushes GN 992.

E+G GN 990-NI Tubes

Elesa+Ganter GN 990-NI Tubes, stainless steel
Material: AISI 304 stainless steel NI, blank BL untreated.
Construction tubings GN 990-NI can be supplied in any length up to 3000 mm.
The tolerances specified for the outside diameter of the round construction tubings comply with the requirements for split mono-block connector clamps. Otherwise the tolerances comply with DIN 2391, DIN 2395 and DIN 2462. Two-piece connector clamps allow obviously larger tolerances on round and square construction tubings.
Accessories:
- Tube end plugs GN 991.
- Insert bushes GN 992.

E+G GN 991 Tube end

Elesa+Ganter GN 991 Tube ends
Material: Polythylen based (PE) technopolymer. Colour Black, matte finish.
Tube end plugs GN 991 have been designed for sealing tube ends for safety or optical reasons.
They are inserted into the tube end either by hand or with a mallet.

E+G GN 992 Threaded end-caps

Elesa+Ganter GN 992 Threaded end-caps
Material: Aluminium, blank.
Threaded tube inserts GN 992 serve as end plugs in tubings which offer the additional facility for fitting threaded levelling elements. Threaded tube inserts can bridge an internal diameter tolerance on both round as well as square tube of ± 0.5 mm. For this purpose lamellas are available. Threaded tube inserts are fitted with a mallet. Accessories Construction tubings GN 990.

E+G GN 911 Clamping kits

Elesa+Ganter GN 911 clamping kits.

E+G GN 291 Linear actuators

Elesa+Ganter GN 291 Linear actuator
Versions:
- Type R1: Right hand thread, single shaft end only.
- Type R2: Rigth hand thread, two shaft ends.
- Type L1: Left hand thread, single shaft end only.
- Type L2: Left hand thread, two shaft ends.
Assembly Sliders, connector clamps and accessoires have to be ordered separately.
In addition to the standard travel lengths specified in the above table for linear actuator GN 291 any length inside the maximum length is available. Besides the extensive range of tube clamp connectors there are a number of additional components for mounting on the linear actuator to build slider units. In order to measure the movement and positioning of the sliders, digital as well as analogue position indicators can be added.
Accessories:
- Housings GN 298.
- Bevel gear wheels GN 297.
- Installation kits for linear actuators GN 295.
- Longitudinal scales GN 299.

E+G GN 292 Linear actuators

Elesa+Ganter GN 292 Linear actuators
Versions:
- Type RL1: Shaft end protruding at one end only.
- Type RL2: Shaft end protruding at both ends.
Material: Guide tube, precision steel tube, chrome-plated SCR, DIN 2391.
Assembly: Sliders, connector clamps and accessoires have to be ordered separately.
In addition to the standard travel lengths specified in the above table for linear actuator GN 292 any length inside the maximum length is available. Besides the extensive range of tube clamp connectors there are a number of additional components for mounting on the linear actuator to build slider units. In order to measure the movement and positioning of the sliders, digital as well as analogue position indicators can be added and furthermore the guide tube can be provided with a longitudinal scale along the slot.
Accessories:
- Installation kits for linear actuators GN 295.
-  Longitudinal scales GN 299.

E+G GN 293 Linear actuators

Elesa+Ganter GN 293 Linear actuators
Versions:
- Type RL2: one shaft right hand thread and one shaft left hand thread.
- Type RR2: both shafts right hand thread.
- Type LL2: both shafts left hand thread.
Material: Guide tube, precision steel tube, chrome-plated SCR, DIN 2391.
Sliders, connector clamps and accessoires have to be ordered separately.
In addition to the standard travel lengths specified in the above table for linear actuator GN 292 any length inside the maximum length is available. Besides the extensive range of tube clamp connectors there are a number of additional components for mounting on the linear actuator to build slider units. In order to measure the movement and positioning of the sliders, digital as well as analogue position indicators can be added and furthermore the guide tube can be provided with a longitudinal scale along the slot.
Accessories:
- Installation kits for linear actuators GN 295.
- Longitudinal scales GN 299.

E+G GN 131.1-GN 131.2 connector

Elesa+Ganter GN 131.1 - GN 131.2 Two-way connector
Material: Aluminium.
Finish:
- SW: RAL 9005 black, matte finish, epoxy resin coating.
- NI: Stainless steel, matte

E+G GN 132.1-GN 132.2 connector

Elesa+Ganter GN 132.1 - GN 132.2 Two-way connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- NI: Stainless steel, matte

E+G GN 145.1 Base plate

Elesa+Ganter GN 145.1 Base plate
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 145.1-NI Swivel clamp

Elesa+Ganter GN 145.1-NI Base plate, stainless steel
Material: AISI 304 stainless steel

E+G GN 146.1 Base plate

Elesa+Ganter GN 146.1 Base plate
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 162.1 Base plate

Elesa+Ganter GN 162.1 Base plate
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 162.1-NI Swivel clamp

Elesa+Ganter GN 162.1-NI Swivel clamp
Material: AISI CF-8 stainless steel
Finish: NI, matte shot-blasted.

E+G GN 163.1 Base plate

Elesa+Ganter GN 163.1 Base plate
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 191.1 T-angel

Elesa+Ganter GN 191.1 Base plate
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 191.1-NI Swivel clamp

Elesa+Ganter GN 191.1-NI Swivel clamp
Material: AISI CF-8 stainless steel
Finish: NI, matte shot-blasted.

E+G GN 192.1 T-angle

Elesa+Ganter GN 192.1 T-angle
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 273.1 Swivel clamp

Elesa+Ganter GN 273.1 Swivel clamp
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 274.1 Swivel clamp

Elesa+Ganter GN 274.1 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted. Types
- Type OZ without centring step.
- Type MZ with centring step. - Type AV with male serration.
- Type IV with female serration.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.

E+G GN 291.1 Linear actuators

Elesa+Ganter GN 291.1 Linear actuators
Versions:
- Type R1: Right hand thread, single shaft end only.
- Type R2: Right hand thread, two shaft ends.
- Type L1: Left hand thread, single shaft end only.
- Type L2: Left hand thread, two shaft ends.
Sliders, connector clamps and accessoires have to be ordered separately.
Square linear actuators GN 291.1 are used if the linear actuator connectors are exposed to high torsion forces. Besides the extensive range of tube clamp connectors there are a number of additional components for mounting on the linear actuator to build slider units. The two-part tube clamp connectors range includes a wide variety of different components for fixing linear actuators and for setting up linear actuator connectors. In order to measure the movement and positioning of the linear actuator connectors, the square tube can be fitted with a longitudinal scale.

E+G GN 147.1 Tube connector

Elesa+Ganter GN 147.1 Tube connector
Material: Aluminium.
Finish: SW, RAL 9005 black, matte finish, epoxy resin coating.

E+G GN 134.1 Tube connector

Elesa+Ganter GN 134.1 Tube connector
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 165.1 Tube connector

Elesa+Ganter GN 165.1 Tube connector
Material: Aluminium.
Finish: SW, RAL 9005 black colour, matte finish, epoxy resin coating.

E+G GN 736.18 Handwheel

Elesa+Ganter GN 736.18 Handwheel
Material: Knurled aluminium profile, anodised.
Colour: Black.
Cap: Acetal resin based (POM) technopolymer, light grey colour.
Resistant to solvents, oils, greases and other chemical agents.
Execution K: H8 reamed hole and keyway in compliance with DIN 6885/1 P9 tolerance Revolving handle
Execution D: with revolving handle in polyamide based (PA) technopolymer, black colour, glossy finish

E+G GN 923.18 Handwheel

Elesa+Ganter GN 923.18 Handwheel
Material: Cast aluminium. Finish RAL 9005 black colour, matte finish, epoxy resin coating.
Hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing handwheels GN 923.18 on shafts by a grub screw see technical data. Revolving handle Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemicals agents. The two-volume special design of the handle provides the operator´s hand with a safe and ergonomic grip when turning the handwheel.
Accessories:
- Drive untis GN 391
- Transfer units GN 391
- Linear actuactors GN 291
- Square linear actuators GN 291.1

E+G GN 923.30 Handwheel

Elesa+Ganter GN 923.30 Handwheel
Material: Cast aluminium. Finish RAL 9005 black colour, matte finish, epoxy resin coating.
Hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing handwheels GN 923.30 on shafts by a grub screw see technical data.
Revolving handle Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemicals agents. The two-volume special design of the handle provides the operator´s hand with a safe and ergonomic grip when turning the handwheel.
Accessories:
- Drive untis GN 391
- Transfer units GN 391
- Linear actuactors GN 291 to GN 293
- Square linear actuators GN 291.1

E+G GN 923.40 Handwheel

Elesa+Ganter GN 923.40 handwheel
Material Cast aluminium. Finish RAL 9005 black colour, matte finish, epoxy resin coating. Assembly Hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance. For fixing handwheels GN 923.40 on shafts by a grub screw see technical data. Revolving handle Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemicals agents. The two-volume special design of the handle provides the operator´s hand with a safe and ergonomic grip when turning the handwheel. Accessories - Drive untis GN 391 - Transfer units GN 391 - Linear actuactors GN 291 to GN 293 - Square linear actuators GN 291.1

E+G GN 924.40 Handwheel

Elesa+Ganter GN 924.40 Handwheel
Material: Cast aluminium. Finish RAL 9005 black colour, matte finish, epoxy resin coating.
Assembly: Hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing handwheels GN 924.40 on shafts by a grub screw see technical data.
Revolving handle Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemicals agents. The two-volume special design of the handle provides the operator´s hand with a safe and ergonomic grip when turning the handwheel.
Accessories:
- Drive untis GN 391
- Transfer units GN 391
- Linear actuactors GN 291 to GN 293
- Square linear actuators GN 291.1

E+G GN 924.50 Handwheel

Elesa+Ganter GN 924.50 Handwheel
Material: Cast aluminium. Finish RAL 9005 black colour, matte finish, epoxy resin coating.
Hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing handwheels GN 924.50 on shafts by a grub screw see technical data.
Revolving handle Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemicals agents. The two-volume special design of the handle provides the operator´s hand with a safe and ergonomic grip when turning the handwheel.
Accessories:
- Drive untis GN 391
- Transfer units GN 391
- Linear actuactors GN 291 to GN 293
- Square linear actuators GN 291.1

E+G GN 924.60 Handwheel

Elesa+Ganter GN 924.60 Handwheel
Material: Cast aluminium. Finish RAL 9005 black colour, matte finish, epoxy resin coating.
Hub with H7 reamed hole with keyway in compliance with DIN 6885/1 P9 tolerance.
For fixing handwheels GN 924.50 on shafts by a grub screw see technical data.
Revolving handle Type GN 798 polyamide based (PA) technopolymer, black colour, matte finish.
Resistant to solvents, oils, greases and other chemicals agents.
The two-volume special design of the handle provides the operator´s hand with a safe and ergonomic grip when turning the handwheel.
Accessories:
- Drive untis GN 391
- Transfer units GN 391
- Linear actuactors GN 291 to GN 293
- Square linear actuators GN 291.1

E+G GN 295 Position Indicator Kit

Elesa+Ganter GN 295 Position Indicator Kit
Material: Steel, blackened.
Torque limiting contact block: Aluminium, black anodised.
Assembly: An installation kit GN 295 comprises an adaptor shaft and a torque limiting contact block.
With the installation kits GN 295 the linear actuators can be fitted with a position indicator. Retrofitting is possible. Remove the wheel, mount the kit and put the wheel back in place. For linear actuator units Ø 60, the plastic cover on the attachment side must be removed before assembly. As a rule a counter is chosen which matches the pitch of the trapeze thread on the lead spindle to show the read-out required per complete revolution.
Accessories:
- Position indicators GN DD51.
- Position indicators GN DD52R.
- Linear actuators GN 291 to GN 293.

E+G GN 299 Longitudinal scales

Elesa+Ganter GN 299 Longitudinal scales
The longitudinal scales (for standard travel lengths l1 of the linear actuator) are engraved by precision laser.
Longitudinal scales have to be ordered together with the linear actuators.
The longitudinal scales GN 299 of Forms A and B are normally used in connection with the linear actuator units GN 291 and GN 291.1, the scales of Forms C and D are normally used for the linear actuator units GN 292 and GN 293.

E+G GN 391 Transfer unit

Elesa+Ganter GN 391 Connecting units
Guide tube Precision steel tube, chrome-plated SCR, DIN 2391. Spindle Steel thust ball bearings. End caps Plastic.
Transfer units GN 391 are normally used in connection with linear actuators (GN 291, GN 292, GN 293). They are
designed to translate the rotary movement for operating the linear actuators to another point or position. The transfer unit in the standard length l1 is a special design: it is designed to turn the operating axis for the linear actuators (handwheel) by 90° together with an angular gear drive. As in linear actuators, digital position indicators can be fitted.
Accessories:
- Housings GN 298
- Bevel gear wheels GN 297
- Position indicators GN DD51
- Position indicators GN DD52R
- Installation kits for linear actuators GN 295

E+G GN 391-NI Transfer unit

Elesa+Ganter GN 391-NI Transfer unit
Guide tube Precision AISI 301 stainless steel tube, DIN 2462. Spindle Stainless steel thust ball bearings. End caps Plastic.
Bevel-gear wheels / handwheels, tube clamps connectors and accessoires are to be ordered separately.
Transfer units GN 391 are normally used in connection with linear actuators (GN 291, GN 292, GN 293). They are designed to translate the rotary movement for operating the linear actuators to another point or position. The transfer unit in the standard length l1 is a special design: it is designed to turn the operating axis for the linear actuators (handwheel) by 90° together with an angular gear drive.
As in linear actuators, digital position indicators can be fitted.
Accessories:
- Housings GN 298
- Bevel gear wheels GN 297
- Position indicators GN DD51.
- Position indicators GN DD52R.
- Installation kits for linear actuators GN 295

E+G GN 297 Bevel-gear wheel

Elesa+Ganter GN 297 Bevel-gear wheel
Material: Steel hardened, teeth milled.
Bevel-gear wheels GN 297 are used for angular / T-gears in connection with linear actuators / transfers units and housings GN 298.
Two bevel-gear wheels are required for an angular gear, three for a T-gear.
The transmission ratio is always 1:1.
Accessories:
- Housings GN 298
- Drive units GN 391
- Transfer units GN 391
- Linear actuators GN 291
- Linear actuators GN 292
- Linear actuatros GN 293

E+G GN 298 Angular gear housing

Elesa+Ganter GN 298 Angular gear housing
Material: Aluminium gravity die-cast.
Clamping screw: Stainless Steel. Finish. RAL 9005 black, matte finish, epoxy resin coating.
Types:
- Type W for angular gears.
- Type T for T-gears.
Housings GN 298 for angular gears / T-gears are used in connection with bevel-gear wheels GN 297 and linear actuators / transfer units: the angular gears / T-gears are designed to deflect the rotary movement of a linear actuator / transfer unit by 90°.
Accessories:
- Bevel gear wheels GN 297
- Drive units GN 391
- Transfer units GN 391
- Linear actuators GN 291
- Linear actuators GN 292
- Linear actuators GN 293

E+G GN 473 Tube connector

Elesa+Ganter GN 473 Tube connector
Material: Aluminium.
Finish:
- Version MT: matte, ground.
- Version ELS: anodised, black.
Clamping screws: AISI 304 stainless steel socket cap screws DIN 912.
The GN 473 foot clamp mountings have a horizontal and a vertical clamp bore, with the vertical clamp bore capable of holding additional square tubings. The bore spacing m of the foot clamp mountings GN 473 is matched with the clamp mountings GN 477 and the flanged bolts GN 480 as well as GN 51.6 retaining magnets. The standard clamping bolts are socket cap screws DIN 912. They can be replaced by adjustable clamping kits GN 511 (description see table of dimensions).
Accessories:
Clamping kits GN 511 (Clamping handles GN 300.1 with distance bushing).

E+G GN 474 Tube connector

Elesa+Ganter GN 474 Tube connector
Material: Aluminium.
Finish:
- Version MT: matte, ground.
- Version ELS: anodised, black.
Clamping screws. AISI 304 stainless steel socket cap screws DIN 912.
The standard clamping bolts are socket cap screws DIN 912. They can be replaced by adjustable clamping kits GN 511 (description see table of dimensions).
Accessory:
Clamping kits GN 511 (clamping handles GN 300.1 with distance bushing).

E+G GN 475 Tube connector

Elesa+Ganter GN 475 Tube connector
Material: Aluminium.
Finish:
- Version MT: matte, ground.
- Version ELS: anodised, black.
Clamping screws: AISI 304 stainless steel socket cap screws DIN 912.
Twistable two-way clamp mountings GN 475 connect rods and tubes within a clamping system under any adjustable angle. With the angle adjustment released, the clamping mounting halves stay connected with formlocking effect.
The standard clamping bolts of the clamping threads d3 are socket cap screws DIN 912. They can be replaced by adjustable clamping kits GN 511.
Accessory:
Clamping kits GN 511 (Clamping handles GN 300.1 with distance bushing)

E+G GN 476 Tube connector

Elesa+Ganter GN 476 Tube connector
Material: Aluminium.
Versions:
- Type A: with bore
- Type W: with bolt, Steel, zinc-plated, blue passivated. 
Finish:
- Version MT: matte, ground.
- Version ELS: anodised, black.
Clamping screws: AISI 304 stainless steel socket cap screws DIN 912.
Grub screw: AISI 301 stainless steel DIN 913.
The T-Clamp mountings GN 476, Type W are an alternative to twistable two-way clamp mountings GN 475 if high angular forces are required. The standard clamping bolts are socket cap screws DIN 912. They can be replaced by adjustable clamping kits GN 511 (description see table of dimensions).
Accessories: Clamping kits GN 511 (clamping handles GN 300.1 with distance bushing).

E+G GN 477 Tube connector

Elesa+Ganter GN 477 Tube connector
Material: Aluminium.
Finish:
- Version MT: matte, ground.
- Version ELS: anodised, black.
The clamp mountings GN 477 have no thread. Fixing or clamping is made via two threads on the attachment side. The bore spacing m of the clamp mountings GN 477 is matched with the foot clamp mountings GN 473 as well as retaining magnets GN 51.6 and the flanged bolts GN 480.
Accessories: Clamping kits GN 511 (clamping handles GN 300.1 with distance bushing)

E+G GN 478 clamp mounting

Elesa+Ganter GN 478 clamp mounting, mountings with threaded holes.
Material: Aluminium.
Finish:
- Version MT: matte, ground.
- Version ELS: anodised, black.
Clamping screws: AISI 304 stainless steel socket cap screws DIN 912.
Clamp mountings GN 478 are primarily designed for mounting sensor holders. The standard clamping bolts are socket cap screws DIN 912. They can be replaced by clamping kits GN 511.
Accessories:
Clamping kits GN 511 (clamping handles GN 300.1 with distance bushing)

E+G GN 479 Sensor holders

Elesa+Ganter GN 479 Sensor holders
Material: AISI 304 stainless steel, matte shot-blasted.
Assembly Fixing screws are not included parts of the order.
The sensor holders GN 479 are designed for holding sensors attached with two lock nuts. The attachment bore matches the central thread of clamp mountings GN 478. For k=30, the cross-shaped oblong holes long provide extra adjustability and allow the use of two fixing screws. Fixing screws to be ordered separately.

E+G GN 479.1 Retaining plates

Elesa+Ganter GN 479.1 Retaining plates
Material: AISI 304 stainless steel, matte shot-blasted.
Assembly Fixing screws are not included parts of the order.
Retaining plates GN 479.1 are designed as universal mounting elements, e.g. for integrating specific bore patterns. The attachment bore matches the central thread of GN 478 clamp mounting. For k=30, the cross-shaped oblong holes long provide extra adjustability and allow the use of two fixing screws. Fixing screws to be ordered separately.

E+G GN 480 Flanged bolts

Elesa+Ganter GN 480 Flanged bolts
Material: Steel, zinc-plated, blue passivated.
Flanged bolts GN 480 are used in connection with clamp mountings, as foot or as connecting element, e.g. for adjustments in width and height. With their low flange height, they provide an alternative for the foot clamp mounting GN 473 in applications where clamping is required at low height above the clamping surface. The bore spacing m of the foot clamp mounting GN 480 is matched with the clamp mountings GN 473 and GN 477 as well as retaining magnets GN 51.6.

E+G GN 480.1-AL tube with or without scales

Elesa+Ganter GN 480.1-AL Retaining tube with scales
Material: Aluminium, anodised, natural colour, matte.
Types:
- Type OS: without scale.
- Type LS: with scale (mm-graduation), engraved by precision laser.
The outside dimensions of the retaining rods / retaining tubings GN 480.1 are matched for use with clamp mountings. The retaining tubings can also be used as cable lead-through or cable glands.

E+G GN 480.1-NI tube with scales

Elesa+Ganter GN 480.1-NI Stainles steel retaining tube with scales
Material: AISI 304 stainless steel NI.
Versions:
- Type OS: without scale.
- Type LS: with scale (mm-graduation), engraved by precision laser.
The outside dimensions of the retaining rods / retaining tubings GN 480.1 are matched for use with clamp mountings. The retaining tubings can also be used as cable lead-through or cable glands.

E+G GN 511 clamp mounting kit

Elesa+Ganter GN 511 clamp mounting kit
For clamp mountings, the clamping kits GN 511 replaces the DIN 912 hexagonal recessed screw.

E+G GN 511.1 clamp mounting kit

Elesa+Ganter GN 511.1 clamp mounting kit in AISI 304 stainless steel.
Standard versions available:
- Type S: with cylinder head screw DIN 912.
- Type K: with adjustable head lever.
With clamping kits GN 511.1 swivel clamp mountings GN 482 can be combined with T-Swivel clamp mountings GN 483 and attachment clamp mountings GN 484 with the same k-dimensions into swivel clamp mounting joints. The centering bush positions the swivel clamp mountings in relation to each other. During assembly, the knurled threaded bush is inserted by the clamping screw itself and by pressing into one of the two swivel clamp mountings and so serves to clamp the articulated joint.

E+G GN 992.5 Threaded end-caps

Elesa+Ganter GN 992.5 Threaded end-caps
Material: AISI 303 stainless steel.
Threaded tube inserts GN 992.5 serve as end plugs in tubings which offer the additional facility for fitting threaded levelling elements. Threaded tube inserts can bridge an internal diameter tolerance on both round as well as square tube of ± 0.5 mm. For this purpose lamellas are available. Threaded tube inserts are fitted with a mallet.
Accessories: Construction tubings GN 990.

E+G GN 162.3 Swivel clamp

Elesa+Ganter GN 162.3 Swivel clamp
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912 and nut DIN 985, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.
The standard clamping bolts are socket cap screws DIN 912, supplied assembled. The xan be replaced by clamping kits GN 911 (description see table of dimensions). Features and applications The clamping bores of the base plate connector clamps GN 162.3 with 2 mounting holes are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket cap screws DIN 912. They can be used in place of adjustable clamping levers GN 911.). Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.
Accessories:
- Construction tubings GN 990.
- Linear actuators GN 291.
- Linear actuators GN 292.
- Clamping kits GN 911.

E+G GN 162.3-NI Swivel clamp

Elesa+Ganter GN 162.3-NI Swivel clamp connector
Material: AISI CF-8 stainless steel, matte shot-blasted.
Clamping screws Identification no. 2: with AISI 304 stainless steel-clamping screw DIN 912 and nut DIN 985.
The standard clamping bolts are socket cap screws DIN 912, supplied assembled. They can be replaced by clamping kits GN 911. The clamping bores of the base plate connector clamps GN 162.3 with 2 mounting holes are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket cap screws DIN 912. They can be used in place of adjustable clamping levers GN 911. Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.
Accessories:
- Construction tubings GN 990.
- Linear actuators GN 291.
- Linear actuators GN 292.
- Clamping kits GN 911

E+G GN 279 Swivel clamp

Elesa+Ganter GN 279 Swivel clamp connector
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screws DIN 912.
The clamping bore of the swivel clamp connectors GN 279 is unmachined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket cap screws DIN 912. They can be used in place of adjustable clamping levers GN 911. Two swivel clamp connectors GN 279 can be combined to swivel clamp connector joints GN 289. Swivel clamp connectors GN 279 can be assembled with swivel clamp connectors GN 272, GN 274 or GN 276 to create swivel clamp connector joints.
Accessories:
- Tubings GN 990.
- Swivel clamp connector joints GN 289.

E+G GN 289 Swivel clamp

Elesa+Ganter GN 289 Swivel clamp connector with stepless adjustment
Material: Aluminium.
Finish:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Clamping screws:
- Identification no. 1: with clamping screw DIN 912, zinc-plated.
- Identification no. 2: with AISI 304 stainless steel-clamping screws DIN 912.
Accessories:
-Tubning GN 990
- Swivel clamp connector GN 279

E+G GN 960 Angle pieces for profil system

Elesa+Ganter GN 960 Angle pieces for profile systems
Material:
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
- Version MT: Aluminium die-cast, matte shot-blasted
Standard versions:
- Version A: without assembly set, without cover.
- Version B: with assembly set, with cover.
Assembly:
- T-slot bolt GN 505.4 with hexagon flange nut DIN 6923, zinc-plated steel, blue passivated.
- T-Nuts GN 505 with socket head head cap screw DIN 7984, zinc-plated steel, blue passivated. Cover Plastic, polyamide based (PA) technopolymer, black matte.

E+G GN 961 Angle pieces

Elesa+Ganter GN 961 Angle pieces for profile systems
Material: Aluminium die-cast, matte shot-blasted MT. Plastic coated
- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.
- Version BL: blank, matte shot-blasted.
Standard versions available:
- Version A: without assembly set, without cover.
- Version B: with assembly set, with cover.
Assembly: - T-slot bolt GN 505.4 with hexagon flange nut DIN 6923, zinc-plated steel, blue passivated.
- T-Nuts GN 505 with socket head head cap screw DIN 7984, zinc-plated steel, blue passivated.
Cover: Plastic, polyamide based (PA) technopolymer, black matte.

E+G GN 963 Cover caps

Elesa+Ganter GN 963 Cover caps for profiles.
Material: Plastic. Black colour RAL 9005, textured finish.
If required, the cover caps are also available individually under standard GN 963. After assembly, the cover caps are snapped into place via four lugs. They lend the angle piece an attractive appearance and protect against dirt. Even after repeated use, the cover caps will remain firmly in place inside the angle pieces thanks to the elastic snap-type lugs.

E+G GN 491 Double tube linear actuators

Elesa+Ganter GN 491 Double tube linear actuators
Technical information:
Guide tube: DIN 2391 Chrome-plated steel SCR.
End pieces/Slider: Aluminium, plastic coated, black RAL 9005, textured finish.
Fixing surface / mounting surface: machined, blank.
Spindle with trapezodial thread: Steel blank, with ball-bearing.
Positioning accuracy: ±0.2mm/300 mm travel.
Follower nut: Gun metal.
Cylinder head screws: DIN 912 Zinc-plated steel.
Hexagon nuts: DIN 985 Zinc-plated steel.
Standard versions:
- Type R1: Right hand thread, single shaft end.
- Type R2: Right hand thread, two shaft ends.
- Type L1: Left hand thread, single shaft end.
- Type L2: Left hand thread, two shaft ends.
Version of the shaft ends:
- Version 1: short - Version 2: long (for position indicator)
- Version 3: 1 x short 1 x long (for position indicator)

E+G GN 492 Double tube linear actuators

Elesa+Ganter GN 492 Double tube linear actuators
Technical information:
Guide tube: DIN 2391 Chrome-plated steel SCR.
End pieces/Slider: Aluminium, plastic coated, black RAL 9005, textured finish.
Fixing surface/mounting surface: machined, blank.
Spindle with trapezodial thread: Steel blank, with ball-bearing.
Positioning accuracy: ±0.2mm/300 mm travel.
Follower nut: Gun metal.
Cylinder head screws: DIN 912 Zinc-plated steel.
Hexagon nuts: DIN 985 Zinc-plated steel.
Standard versions available:
- Type R1: Right hand thread, single shaft end.
- Type R2: Right hand thread, two shaft ends.
- Type L1: Left hand thread, single shaft end.
- Type L2: Left hand thread, two shaft ends.
Version of the shaft ends:
- Version 1: short
- Version 2: long (for position indicator)
- Version 3: 1 x short 1 x long (for position indicator)

E+G GN 490 Clamp mounting

Elesa+Ganter GN 490 Clamp mounting, twistable two-way clamp mountings
Material: Aluminium.
Finish:
- Version MT: matte finish, slide ground.
- Version SW: RAL 9005 black colour,matte finish, epoxy resin coating
Standard versions available:
- Type A: with cylinder head screw DIN 912.
- Type B: with adjustable clamping handles GN 300.1.
Hexagon nuts: DIN 934 AISI 304 stainless steel.
The standard clamping bolts are socket cap screws DIN 912 in AISI 304 stainless steel.
Adjustable clamping lever GN 300.1 - Zinc-die cast, plastic coated, silver RAL 9006, matte finish, epoxy resin coating.
Insert/Distance bushing: AISI 303 stainless steel.
Twistable two-way clamp mountings GN 490 clamp the rods or tubes via a prism, allowing a greater Ø tolerance to be bridged. The pressure spring makes clamping and releasing easier.

E+G GN 967 Angle pieces/Shackles

Elesa+Ganter GN 967 Angle pieces/Shackles
Material: Sheet steel.
- Version ZB: zinc plated, blue passivated.
- Version SW: zinc plated, RAL 9005 black colour, matte finish, epoxy resin coating.
- Version SR: zinc plated, RAL 9006 silver colour, matte finish, epoxy resin coating.
Standard versions available:
- Type F: Shackle.
- Type L: Angle.
Assembly:
- Identification no. 1: with bore for coutersunk screws DIN 7991.
- Identification no. 2: with out bore for countersunk.

E+G GN 482 Swivel clamp

Elesa+Ganter GN 482 Swivel clamp
Material: Aluminium.
Finish:
- Version MT: slided grounded, matte.
- Version ELS: black anodized.
Standard versions available:
- Type Q: Clamping bore transverse to the swivel axis.
- Type P: Clamping bore parallel to the swivel axis.
Socket cap screw: DIN 912 AISI 304 stainless steel.

E+G GN 296 Position Indicator Kit

Elesa-Ganter GN 296 Position Indicator
Adaptor shaft: Steel, blackened.
Torque support: Aluminium, black grounded.
Accessories Position indicators and handwheels have to be ordered seperately.
With the installation kit GN 296 the square linear actuator can be fitted with a digital position indicator. An installation kit comprises an adaptor shaft and a torque support. A retrofit is possible. The handwheel is removed, the kit is mounted and the handwheel is refitted. As a rule a counter is chosen which is matched to the pitch of the spindle with trapezoidal thread so the indicator after one complete revolution accords to the pitch of the spindle.

E+G GN 483 T-Swivel clamp

Elesa+Ganter T-Swivel clamp GN 483 Material Aluminium. Finish - Version MT: slided grounded, matte. - Version ELS: black anodized. Standard versions available - Type A: with bore. - Type W: with bolt. Bolt Zinc-plated steel, blue passivated (Type W). Grub screw DIN 913 (Type A) Stainless Steel AISI 304. Grub screw DIN 915 (Type W) Stainless Steel AISI 304. Features and applications Using swivel clamp mountings GN 482 and attachment clamp mountings GN 484 with the same k dimensions, T-Swivel clamp mountings GN 483 are easily combined into articulated swivel clamp mounting joints. Clamping kits GN 511.1 with screw, type S and adjustable hand lever, type K are available for this purpose (description see table of dimensions).

E+G GN 484 Attachment clamp

Elesa+Ganter GN 484 Attachment clamp
Material: Aluminium.
Finish:
- Version MT: slided grounded, matte.
- Version ELS: black anodized.
Attachment clamp mountings GN 484 are primarily designed for mounting sensor holders GN 479 and retaining plates GN 479.1. They are fitted with a central thread and for the size with k = 20 and higher, an additional bore template 4 x M4. Using swivel clamp mountings GN 482 and T-Swivel clamp mountings GN 483 with the same k dimensions, attachment clamp mountings GN 484 are easily combined into articulated swivel clamp mounting joints. Clamping kits GN 511.1 with screw, type S and adjustable hand lever, type K are available for this purpose.

E+G GN 132.5 Two-way connector

Elesa+Ganter GN 132.5 Two-way connector clamps

GN 132.5 is mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The shape of the clamping screws / nuts prevents the formation of wetness due to dammed-up water. The designs with sealing (Type B) also seals bore holes and threads.

Material: Stainless Steel AISI CF-8, matt shot-blated.
Clamping bores are mechanically machined.
Carriage bolt DIN 603: Stainless Steel A2.
Cap nuts DIN 917: Stainless Steel A2.

Sealings
- Washers Plastic (Polyacetal POM)
- Edge ring, Silicon, 40 ... 60 Shore A

Type
- Type A: without sealing
- Type B: with sealing

E+G GN 146.5 Flanged clamp

Elesa+Ganter GN 146.5 Flanged connector clamp

GN 146.5 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The shape of the clamping screws / nuts prevents the formation of wetness due to dammed-up water. The designs with sealing (Type B) also seals bore holes and threads.

Material: Stainless Steel AISI CF-8, matt shot-blated.
Clamping bores are mechanically machined.
Carriage bolt DIN 603: Stainless Steel A2.
Cap nuts DIN 917: Stainless Steel A2.

Sealings
- Washers Plastic (Polyacetal POM)
- Edge ring, Silicon, 40 ... 60 Shore A

Type
- Type A: without sealing
- Type B: with sealing

E+G GN 146.6 Flanged clamp

Elesa+Ganter GN 146.6 Flanged connector clamp

GN 146.6 is mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The shape of the clamping screws / nuts prevents the formation of wetness due to dammed-up water. The designs with sealing (Type B) also seals bore holes and threads.

Material: Stainless Steel AISI CF-8, matt shot-blated.
Clamping bores, mechanically machined.
Carriage bolt DIN 603: Stainless Steel A2.
Cap nuts DIN 917: Stainless Steel A2.

Sealings
- Washers Plastic (Polyacetal POM)
- Edge ring, Silicon, 40 ... 60 Shore A

Type
- Type A: without sealing
- Type B: with sealing

E+G GN 163.5 Base plate

Elesa+Ganter GN 163.5 Base plate connector clamp

The clamping bores of the Stainless Steel-Base plate connector clamps GN 163.5 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The shape of the clamping screws / nuts prevents the formation of wetness due to dammed-up water. The designs with sealing (Type B) also seals bore holes and threads.

Material: Stainless Steel AISI CF-8, matt shot-blated.
Clamping bores, mechanically machined.
Carriage bolt DIN 603: Stainless Steel A2.
Cap nuts DIN 917: Stainless Steel A2.

Sealings
- Washers Plastic (Polyacetal POM)
- Edge ring, Silicon, 40 ... 60 Shore A

Types
- Type A: without sealing
- Type B: with sealing

E+G GN 192.5 T-angle

Elesa+Ganter GN 192.5  T-angle connector clamps

Material: Stainless Steel AISI CF-8, matt shot-blated.
Clamping bores, mechanically machined.
Carriage bolt DIN 603: Stainless Steel A2.
Cap nuts DIN 917: Stainless Steel A2.

Sealings
- Washers Plastic (Polyacetal POM)
- Edge ring, Silicon, 40 ... 60 Shore A

Types
- Type A: without sealing
- Type B: with sealing

E+G GN 131 Swivel clamp

E+G GN 131 Swivel clamp

(17)

E+G GN 132 Swivel clamp

E+G GN 132 Swivel clamp

(30)

E+G GN 133 Swivel clamp

E+G GN 133 Swivel clamp

(54)

E+G GN 134 Tube Connector

E+G GN 134 Tube Connector

(60)

E+G GN 141 Tube Connector

E+G GN 141 Tube Connector

(52)

E+G GN 145 Swivel clamp

E+G GN 145 Swivel clamp

(17)

E+G GN 146 Swivel clamp

E+G GN 146 Swivel clamp

(30)

E+G GN 146.3 Swivel clamp

E+G GN 146.3 Swivel clamp

(14)

E+G GN 147 Tube Connector

E+G GN 147 Tube Connector

(16)

E+G GN 162 Swivel clamp

E+G GN 162 Swivel clamp

(12)

E+G GN 163 Swivel clamp

E+G GN 163 Swivel clamp

(28)

E+G GN 165 Tube Connector

E+G GN 165 Tube Connector

(27)

E+G GN 166 Tube Connector

E+G GN 166 Tube Connector

(28)

E+G GN 167 Tube Connector

E+G GN 167 Tube Connector

(28)

E+G GN 171 Tube Connector

E+G GN 171 Tube Connector

(28)

E+G GN 191 Swivel clamp

E+G GN 191 Swivel clamp

(18)

E+G GN 192 Swivel clamp

E+G GN 192 Swivel clamp

(24)

E+G GN 193 Tube Connector

E+G GN 193 Tube Connector

(78)

E+G GN 194 Tube Connector

E+G GN 194 Tube Connector

(52)

E+G GN 195 Tube Connector

E+G GN 195 Tube Connector

(42)

E+G GN 231 Tube support

E+G GN 231 Tube support

(28)

E+G GN 241 Tube support

E+G GN 241 Tube support

(280)

E+G GN 242 Tube support

E+G GN 242 Tube support

(16)

E+G GN 271 Swivel clamp

E+G GN 271 Swivel clamp

(2)

E+G GN 272 Swivel clamp

E+G GN 272 Swivel clamp

(16)

E+G GN 273 Swivel clamp

E+G GN 273 Swivel clamp

(8)

E+G GN 274 Swivel clamp

E+G GN 274 Swivel clamp

(64)

E+G GN 275 Swivel clamp

E+G GN 275 Swivel clamp

(8)

E+G GN 276 Swivel clamp

E+G GN 276 Swivel clamp

(64)

E+G GN 277 Swivel clamp

E+G GN 277 Swivel clamp

(8)

E+G GN 278 Swivel clamp

E+G GN 278 Swivel clamp

(64)

E+G GN 281 Swivel clamp

E+G GN 281 Swivel clamp

(8)

E+G GN 282 Swivel clamp

E+G GN 282 Swivel clamp

(32)

E+G GN 283 Swivel clamp

E+G GN 283 Swivel clamp

(32)

E+G GN 284 Swivel clamp

E+G GN 284 Swivel clamp

(136)

E+G GN 285 Swivel clamp

E+G GN 285 Swivel clamp

(32)

E+G GN 286 Swivel clamp

E+G GN 286 Swivel clamp

(136)

E+G GN 287 Swivel clamp

E+G GN 287 Swivel clamp

(32)

E+G GN 288 Swivel clamp

E+G GN 288 Swivel clamp

(136)

E+G GN 271.4 Sensor holders

E+G GN 271.4 Sensor holders

(2)

E+G GN 272.4 Sensor holders

E+G GN 272.4 Sensor holders

(2)

E+G GN 273.4 Sensor holders

E+G GN 273.4 Sensor holders

(8)

E+G GN 990 pipes

E+G GN 990 pipes

(2,983)

E+G GN 990-NI Tubes

E+G GN 990-NI Tubes

(22)

E+G GN 991 Tube end

E+G GN 991 Tube end

(22)

E+G GN 992 Threaded end-caps

E+G GN 992 Threaded end-caps

(32)

E+G GN 911 Clamping kits

E+G GN 911 Clamping kits

(14)

E+G GN 291 Linear actuators

E+G GN 291 Linear actuators

(76)

E+G GN 292 Linear actuators

E+G GN 292 Linear actuators

(14)

E+G GN 293 Linear actuators

E+G GN 293 Linear actuators

(12)

E+G GN 131.1-GN 131.2 connector

E+G GN 131.1-GN 131.2 connector

(2)

E+G GN 132.1-GN 132.2 connector

E+G GN 132.1-GN 132.2 connector

(6)

E+G GN 145.1 Base plate

E+G GN 145.1 Base plate

(2)

E+G GN 145.1-NI Swivel clamp

E+G GN 145.1-NI Swivel clamp

(1)

E+G GN 146.1 Base plate

E+G GN 146.1 Base plate

(6)

E+G GN 162.1 Base plate

E+G GN 162.1 Base plate

(2)

E+G GN 162.1-NI Swivel clamp

E+G GN 162.1-NI Swivel clamp

(1)

E+G GN 163.1 Base plate

E+G GN 163.1 Base plate

(6)

E+G GN 191.1 T-angel

E+G GN 191.1 T-angel

(4)

E+G GN 191.1-NI Swivel clamp

E+G GN 191.1-NI Swivel clamp

(1)

E+G GN 192.1 T-angle

E+G GN 192.1 T-angle

(3)

E+G GN 273.1 Swivel clamp

E+G GN 273.1 Swivel clamp

(2)

E+G GN 274.1 Swivel clamp

E+G GN 274.1 Swivel clamp

(48)

E+G GN 291.1 Linear actuators

E+G GN 291.1 Linear actuators

(56)

E+G GN 147.1 Tube connector

E+G GN 147.1 Tube connector

(3)

E+G GN 134.1 Tube connector

E+G GN 134.1 Tube connector

(6)

E+G GN 165.1 Tube connector

E+G GN 165.1 Tube connector

(3)

E+G GN 736.18 Handwheel

E+G GN 736.18 Handwheel

(1)

E+G GN 923.18 Handwheel

E+G GN 923.18 Handwheel

(1)

E+G GN 923.30 Handwheel

E+G GN 923.30 Handwheel

(1)

E+G GN 923.40 Handwheel

E+G GN 923.40 Handwheel

(1)

E+G GN 924.40 Handwheel

E+G GN 924.40 Handwheel

(1)

E+G GN 924.50 Handwheel

E+G GN 924.50 Handwheel

(1)

E+G GN 924.60 Handwheel

E+G GN 924.60 Handwheel

(1)

E+G GN 295 Position Indicator Kit

E+G GN 295 Position Indicator Kit

(5)

E+G GN 299 Longitudinal scales

E+G GN 299 Longitudinal scales

(76)

E+G GN 391 Transfer unit

E+G GN 391 Transfer unit

(4)

E+G GN 391-NI Transfer unit

E+G GN 391-NI Transfer unit

(4)

E+G GN 297 Bevel-gear wheel

E+G GN 297 Bevel-gear wheel

(3)

E+G GN 298 Angular gear housing

E+G GN 298 Angular gear housing

(8)

E+G GN 473 Tube connector

E+G GN 473 Tube connector

(12)

E+G GN 474 Tube connector

E+G GN 474 Tube connector

(26)

E+G GN 475 Tube connector

E+G GN 475 Tube connector

(26)

E+G GN 476 Tube connector

E+G GN 476 Tube connector

(24)

E+G GN 477 Tube connector

E+G GN 477 Tube connector

(12)

E+G GN 478 clamp mounting

E+G GN 478 clamp mounting

(26)

E+G GN 479 Sensor holders

E+G GN 479 Sensor holders

(7)

E+G GN 479.1 Retaining plates

E+G GN 479.1 Retaining plates

(2)

E+G GN 480 Flanged bolts

E+G GN 480 Flanged bolts

(12)

E+G GN 480.1-AL tube with or without scales

E+G GN 480.1-AL tube with or without scales

(30)

E+G GN 480.1-NI tube with scales

E+G GN 480.1-NI tube with scales

(60)

E+G GN 511 clamp mounting kit

E+G GN 511 clamp mounting kit

(9)

E+G GN 511.1 clamp mounting kit

E+G GN 511.1 clamp mounting kit

(8)

E+G GN 992.5 Threaded end-caps

E+G GN 992.5 Threaded end-caps

(18)

E+G GN 162.3 Swivel clamp

E+G GN 162.3 Swivel clamp

(12)

E+G GN 162.3-NI Swivel clamp

E+G GN 162.3-NI Swivel clamp

(5)

E+G GN 279 Swivel clamp

E+G GN 279 Swivel clamp

(16)

E+G GN 289 Swivel clamp

E+G GN 289 Swivel clamp

(128)

E+G GN 960 Angle pieces for profil system

E+G GN 960 Angle pieces for profil system

(27)

E+G GN 961 Angle pieces

E+G GN 961 Angle pieces

(6)

E+G GN 963 Cover caps

E+G GN 963 Cover caps

(3)

E+G GN 491 Double tube linear actuators

E+G GN 491 Double tube linear actuators

(76)

E+G GN 492 Double tube linear actuators

E+G GN 492 Double tube linear actuators

(32)

E+G GN 490 Clamp mounting

E+G GN 490 Clamp mounting

(16)

E+G GN 967 Angle pieces/Shackles

E+G GN 967 Angle pieces/Shackles

(24)

E+G GN 482 Swivel clamp

E+G GN 482 Swivel clamp

(24)

E+G GN 296 Position Indicator Kit

E+G GN 296 Position Indicator Kit

(3)

E+G GN 483 T-Swivel clamp

E+G GN 483 T-Swivel clamp

(24)

E+G GN 484 Attachment clamp

E+G GN 484 Attachment clamp

(20)

E+G GN 132.5 Two-way connector

E+G GN 132.5 Two-way connector

(0)

E+G GN 146.5 Flanged clamp

E+G GN 146.5 Flanged clamp

(0)

E+G GN 146.6 Flanged clamp

E+G GN 146.6 Flanged clamp

(0)

E+G GN 163.5 Base plate

E+G GN 163.5 Base plate

(0)

E+G GN 192.5 T-angle

E+G GN 192.5 T-angle

(0)

Close

Share site

Please fill in the form below with your details. Fields marked with must be completed

Share site

Thank you for sharing this page. Your friend will shortly receive an email.
Close

Newsletter

Subscribe

Close

Send us an email

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Call me request

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Log in

Please fill in the form with your username and password to log in at Brd. Klee



Have you forgotten your password?
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • Own profile with own lot number, reordering and favourites
  • 24 hours service
Close

Lost Password

Please give us your email, and we will send you instructions on how to reset your password to your mail.


Recover password
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • My profile with own lot number, reordering and favorites
  • 24 hours emergency service
Close

Create profile

Please fill in the form below with your request. Fields marked with must be completed




Close

Complete

There is now sent a request for inclusion in our customer base.

If your company is recognized for the terms you will within 24 hours receive an email with your password.

Welcome to Brd. Klee

Close