E+G Toggle Clamps

E+G Vertical clamp GN 810

Elesa+Ganter GN 810 Vertical clamps
Sheet body and metal parts: Zinc-plated case-hardened steel C10, blue passivated.
- Version A: with forked clamping arm with two stepped side washers.
- Version E: with solid clamping arm with bolt retainer for welding.
Bearing pin: Hardened and tempered steel.
Bearing rivets: Case-hardened steel (from size ≥ 200).
Handle: Oil-resistant, solid plastic, red colour.

E+G Vertical clamp GN 810-NI st. steel

Elesa+Ganter GN 810-NI Vertical clamps with horizontal base

Sheet body and metal parts
AISI 304 stainless steel.
- Version A: with forked clamping arm with two stepped side washers.
- Version E: with solid clamping arm with bolt retainer for welding.
Bearing pin
AISI 304 stainless steel.
Bearing rivets
AISI 304 stainless steel.
Handle
Oil-resistant, solid plastic, red colour.

E+G Vertical clamp GN 810.1-NI st. steel

Elesa+Ganter GN 810.1-NI Vertical clamps with vertical base

Sheet body and metal parts
AISI 304 stainless steel.
- Version B: with forked clamping arm with two stepped side washers.
- Version F: with solid clamping arm with bolt retainer for welding.
Bearing pin
AISI 304 stainless steel.
Bearing rivets
AISI 304 stainless steel.
Handle
Oil-resistant, solid plastic, red colour.

E+G Vertical clamp GN 812

Elesa+Ganter GN 812 Vertical clamps

Sheet body and metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Version AV: forked clamping arm with two stepped side washers.
- Version EV: solid clamping arm with bolt retainer for welding.
Bearing pins
Hardened and tempered steel.
Bearing rivets
Case-hardened steel.
Handle
Oil resistant, solid plastic, red colour.

E+G Vertical clamp GN 813 heavy duty

Elesa+Ganter GN 813 Vertical clamps - heavy duty type

Clamping arm
Zinc-plated weldable steel, blue passivated.
Bearing pin and bearing rivet
Case-hardened steel.
Handle
Oil-resistant, solid plastic, red colour.

E+G Horisontal clamp GN 820

Elesa+Ganter GN 820 Horizontal clamps with horizontal base

Sheet body and metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Execution M: with forked clamping arm with two stepped side washers.
- Execution O: with solid clamping arm with bolt retainer for welding.
Bearing pin
Hardened and tempered steel.
Bearing bushes
Case-hardened steel (available from size ≥ 355).
Handle
Oil-resistant, solid plastic, red colour.

E+G Horisontal clamp GN 820-NI

Elesa+Ganter GN 820-NI Horizontal clamps with horizontal base

Sheet body and metal parts
AISI 304 stainless steel.
- Execution M: with forked clamping arm with two stepped side washers.
- Execution O: with solid clamping arm with bolt retainer for welding.
Bearing pin
AISI 304 stainless steel.
Handle
Oil-resistant, solid plastic, red colour.

E+G Plunger clamp GN 840

Elesa+Ganter GN 840 Plungers clamps for push-pull clamping

Sheet body and metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Version ASS: with clamping action by turning the handle on the right.
- Version ASD: with clamping action by turning the handle on the left.
Plunger and guide bush
Zinc-plated steel, blue passivated.
Handle
Oil-resistant, solid plastic, red colour.

E+G Plunger clamp GN 841

Elesa+Ganter GN 841 Plunger clamps for push-on clamping

Sheet body and metal parts
Zinc-plated case-hardened steel C10, blue passivated.
Plunger
Zinc-plated steel, blue passivated.
Guide bush
Zinc-plated brass, blue passivated.
Handle
Oil-resistant, solid plastic, red colour.

E+G Plunger clamp GN 842

Elesa+Ganter GN 842 Plunger clamps for push-pull clamping

Base
- brass for sizes 70 and 160 with fixing holes with countersunk to accept;
- counersunk bolts with internal hexagon DIN 912-M5 or M6 respectively;
- black-oxide forged steel for sizes from 360 to 3100.
Metal parts
Zinc-plated case-hardened steel C10, blue passivated.
Plunger
Zinc-plated steel, blue passivated.
Bearing bush
Case-hardened steel.
Handle
Oil-resistant, solid plastic, red colour.

E+G Plunger clamp GN 843.1/843.1-NI

Elesa+Ganter GN 843.1 Plunger clamps

Body
Zinc-plated steel, blue passivated.
Sheet metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Version AS: without mounting bracket.
- Version ASW: with mounting bracket.
Handle
Oil resistant, solid plastic, red colour.

Elesa+Ganter GN 843.1-NI Plunger clamps

Sheet metal parts
AISI 304 stainless steel.
- Execution AS: without mounting bracket.
- Execution ASW: with mounting bracket.
Other parts
AISI 305 stainless steel.
Handle
Oil resistant, solid plastic, red colour.

E+G Plunger clamp GN 844

Elesa+Ganter GN 844 Plunger clamps for push-pull clamping

Base
Black-oxide brass.
Body and metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Version ASS: with clamping action by turning the handle on the right.
- Version ASD: with clamping action by turning the handle on the left.
Plunger
Zinc-plated steel, blue passivated.
Handle
Oil-resistant, solid plastic, red colour.

E+G Hook clamp GN 850

Elesa+Ganter GN 850 Hook clamps with pulling action

Metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Execution T: with pulling plunger.
- Execution TF: zinc-plated steel, blue passivated, with pulling hook.
Handle
Oil-resistant, solid plastic, red colour.

E+G Latch clamp GN 851

Elesa+Ganter GN 851 Latch clamps with pulling action

Versions:
- Version T2: with pulling latch, with latch bracket.
- Version T: without pulling latch, with latch bracket.

Material:
- Parts in sheet metal: Zinc-plated case-hardened steel C10, blue passivated.
- Pulling latch: Zinc-plated steel St 37, blue passivated, parallel to the clamping arm.
- Handle: Oil-resistant, solid plastic, red colour.
All moving parts lubricated with special grease.

GN 851 also available in stainless steel GN 851-NI

Pulling latch GN 951.1 also available without clamp

E+G Latch clamp GN 851-NI st. steel

Elesa+Ganter GN 851-NI Latch clamps with pulling action

Versions:
- Version T2: with pulling latch, with latch bracket.
- Version T: without pulling latch, with latch bracket.

Material:
- Parts in sheet metal, Zinc-plated case-hardened steel C10, blue passivated.
- Pulling latch, Zinc-plated steel St 37, blue passivated, parallel to the clamping arm.
- Handle in Oil-resistant, solid plastic, red colour.

All moving parts lubricated with special grease.

GN 851-NI also available in steel GN 851

Pulling latch GN 951.1 also available without clamp

E+G Latch clamp GN 851.1

Elesa+Ganter GN 851.1 Latch clamps with pulling action

Versions:
- Version T3: with pulling latch, with latch bracket.
- Version T: without pulling latch, with latch bracket.

Material:
- Parts in sheet metal, Zinc-plated case-hardened steel C10, blue passivated.
- Pulling latch in Zinc-plated steel St 37, blue passivated, perpendicular to the clamping arm.
- Handle in Solid moulded plastic handle sleeve, red colour, oil resistant.
All moving parts lubricated with special grease.

GN 851.1 also available in stainless steel GN 851.1-NI

Pulling latch GN 951.1 also available without clamp

E+G Latch clamp GN 851.1-NI st. steel

E+G GN 851.1-NI Vertical latch type toggle clamp in Stainless Steel, for pulling action

Versions:
- Type T3: with U-bolt latch, with catch
- Type T: without U-bolt latch, with catch

Material:
- Parts in sheet metal/U-bolt latch: Stainless Steel AISI 304
- Pin: Stainless Steel AISI 303
- Handle with plastic sleeve, red, oil resistant
All moving parts lubricated with special grease

GN 851.1-NI also available in steel GN 851.1

Pulling latch GN 951.1 also available without clamp

 

E+G Latch clamp GN 851.2

Elesa+Ganter GN 851.2 Latch clamps with pulling action

Metal parts
Zinc-plated case-hardened steel C10, blue passivated.
Pulling latch
Zinc-plated steel, blue passivated, clamping arm horizontal to the fixing plane.
Handle
Oil-resistant, solid plastic, red colour.
Standard versions available
- Type T4: with pulling latch, with latch bracket.
- Type T: without pulling lathc, with latch bracket.

E+G Latch Clamp GN 851.3

E+G GN.851.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities up to 7000N.
The locking mechanism can be opened with one hand

All moving parts lubricated with special grease.
Handle with plastic sleeve - red, oil resistant.

Types:
Type T6: With U-bolt latch, with catch
Type T: Without U-bolt latch, with catch

Version in Steel:
Parts in sheet metal:
– Case-hardened steel (C10)
– Zinc plated, blue passivated

Version in stainless steel:
Sheet metal parts/U-bolt latch/pin:
– AISI 316 L

RoHS compliant

The u-bolt latch can be ordered separately as E+G GN 951.1

E+G clamp GN 910

Elesa+Ganter GN 910 Longlife clamp
Parts in sheet metal Case hardened steel, blackened.
Bearing pins and rivets: Hardened and ground steel.
Handle: Oil-resistant, solid-plastic, red colour.
Standard versions available
- Version A: with clamping arm with slotted hole.
- Version E: with clamping arm with bushing.

E+G clamp GN 910.1

Elesa+Ganter GN 910.1 clamp
Parts in sheet metal Case-hardened steel, blackened.
Bearing pins and rivets: Hardened and ground steel.
Handle: Oil-resistant, solid plastic, red colour.
Standard versions available
- Version B: with clamping arm with slotted hole.
- Version F: with clamping arm with bushing.

E+G Knee lever with foot GN 910.2

Elesa+Ganter GN 910.2 Knee lever with foot
Parts in sheet metal Case-hardened steel C10, blackened.
Bearing pins and rivets: Hardened and ground steel
Accessories on request:
- Handles GN 910.5.
- Arm levers GN 910.6.
- Clamping arm elongations GN 910.7.
- Bushings GN 910.8.
- Base plates GN 910.9.

E+G Knee lever no foot GN 910.3

Elesa+Ganter GN 910.3 Knee lever without foot
Parts in sheet metal: Case hardened steel C10, blackened.
Bearing pins and rivets: Hardened and ground steel.
Accessories on request:
- Handles GN 910.5
- Arm levers GN 910.6
- Clamping arm elongations GN 910.7
- Bushings GN 910.8
- Base plates GN 910.9

E+G Vertical clamp GN 812.1

Elesa+Ganter GN 812.1 Vertical quick-release clamp with angle foot

Clamp arm and handle move in the same direction. In the closed position, the handles are perpendicular to the holding arm.

Holding capacity 750-2600 N.

Types:
- Type AVF with open fork. Supplied with two mounting discs.
- Type EVF with massive arm. Supplied with bolt holder for welding.
- Type CVF Forked clamping arm, with two flange washers and clamping screw GN 708.1

Material:
- Steel plate parts in hardened steel C10, galvanized.
- Steering pin in hardened steel.
- Guide bushing in case-hardened steel.
- Support bushings in case-hardened steel.
- Handle in red oil-resistant plastic.
- Moving parts are lubricated with special grease.

GN 812.1 can be installed in two levels and does not take up much space.  The holding arm is cut and reinforced where the working pressure is the hardest. Presser foot is selected separately. This series is also available in a pneumatic version.

E+G Horizontal clamp GN 820.2

Elesa+Ganter GN 820.2 Horizontal clamps
Sheet body and metal parts: Zinc-plated case-hardened steel C10, blue passivated.
Bearing pin: Tempered steel.
Bearing bushes: Case-hardened steel.
Handle: Oil-resistant, solid plastic, red colour.

E+G Toggle clamp GN 820.3/820.3-NI

Elesa+Ganter GN 820.3 Horizontal clamps

Types
- Type ML: forked clamping arm
- Type OL: solid clamping arm

Made from case hardening steel C10, zinc plated, blue passivated.
Solid moulded plastic handle sleeve, red, oil resistant.
Bearing pins tempered.
Bearing rivets (from size 355 upwards) case hardened

All moving parts are lubricated with special grease

E+G Toggle clamp GN 820.4/820.4-NI

Elesa+Ganter GN 820.4 Horizontal clamp

Types
- Type NL: forked clamping arm
- Type PL: solid clamping arm

Materiael: Case hardening steel C10, zinc plated, blue passivated
Bearing pins tempered
Bearing rivets (from size 355 upwards), case hardened
solid moulded plastic handle sleeve red oil resistant

All moving parts are lubricated with special grease

A special feature for the horizontal clamp GN 820.3 is its low profile in clamping position.
They are designed in such a way to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance).
These clamps are fitted with a safety function. During closing, a safety hook ensures a form-locking bolting connection. It prevents the inadvertent unlocking of the clamping position caused by vibrations.
To open, turn the safety hook out of the bolting connection (one-hand operation).
Stepped side washers respectively clamping bolt retainers are included.

E+G Horisontal clamp GN 820.1-NI

Elesa+Ganter GN 820.1-NI Horizontal clamps with vertical base

Sheet body and metal parts
AISI 304 stainless steel.
- Execution N: with forked clamping arm with two stepped side washers.
- Execution P: with solid clamping arm with bolt retainer for welding.
Bearing pin
AISI 304 stainless steel.
Handle
Oil-resistant, solid plastic, red colour.

E+G Latch clamp GN 858

Elesa+Ganter GN 858 latch clamps.
Body and latch bracket: Black-oxide forged / precision die casting steel.
Bearing pins: Hardened and ground steel.
Handl:e Oil-resistant, solid plastic, red colour.

E+G Hook clamp GN 821

Elesa+Ganter Hook clamp GN 821 Material: Zinc-plated steel, blue passivated. - Version A: without safety catch. - Version S: with safety catch. - Version SV: for safety with padlock. - Version SS: with lock.

E+G Hook clamp GN 831

Elesa+Ganter Hook clamp GN 831 Material: Zinc-plated steel. - Version A: without safety catch. - Version S: with self-locking safety catch. - Version SV: for safety with padlock.

E+G Hook clamp TLA.Z, TLA.S

Elesa+Ganter Hook clamp TLA.Z, TLA.S Standard executions: - TLAZ: basic hook clamp. Lever body and bracket in zinc-plated steel. - TLAS: hook clamp with security stop and technopolymer push button in RAL 3000 red colour or with stainless steel spring.Lever body and bracket in AISI 304 stainless steel.

E+G Hook clamp TLD.Z, TLD.S

Elesa+Ganter TLD.Z, TLD.S

E+G Hook clamp TLC.Z, TLC.S

Elesa+Ganter Hook clamp TLC.Z, TLC.S Lever body: TLC.Z: zinc-plated steel. TLC.S: AISI 304 stainless steel.

E+G Hook clamp TLE.Z, TLE.S

Elesa+Ganter Hook clamp TLE.Z, TLE.S Standard executions: - TLE.Z: zinc-plated steel basic hook clamps. - TLE.S: AISI 304 stainless steel basic hook clamps.

E+G Hook clamp TLF.Z, TLF.S

Elesa+Ganter Hook clamp TLF.Z, TLF.S Standard executions - TLFZ: basic hook clamps, zinc-plated steel. - TLFS: hook clamps with security stop. RAL 3000 red technopolymer push button.

E+G Hook clamp TLG.Z, TLG.S

Elesa+Ganter Hook clamp TLG.Z, TLG.S Body lever TLG.Z: zinc-plated steel. TLG.S: AISI 304 stainless steel.

E+G Hook clamp TLI.Z, TLI.S

Elesa+Ganter Hook clamp TLI.Z, TLI.S Lever body TLI.Z: zinc-plated steel. TLI.S: AISI 304 stainless steel.

E+G Hook Clamp TLV.Z, TLV.S

Elesa+Ganter Hook Clamp TLV.Z, TLV.S Lever body TLV.Z: zinc-plated steel. TLV.S: AISI 304 stainless steel.

E+G Hook clamps TLL

Elesa-Ganter adjustable hook clamp TLL.
Zinc-plated steel.
AISI 304 stainless steel adjustable hook clamps on request.

 

E+G Hook clamps TLM

 

E+G Hook clamps TLN

 

E+G Hook clamps TLP

 

E+G C-Clamp GN 855

Elesa+Ganter GN 855 C-Clamps
Clamp: Steel, forged blackened.
Bearing flange: Sheet steel, blackened.
Nut: Steel, blackened.
Counter plate: Steel, blackened.

E+G Latch clamp GN 852

Elesa+Ganter GN 852 Latch clamps - Heavy duty type

Body and latch bracket
Black-oxide forged steel. Black coating (version T2) or blackened (version T2S).
Operating lever
Forged steel C40 with black coating.
Pulling latch and parallel fulcrum pin
Zinc-plated steel, blue passivated.
Assembly
All moving parts lubricated with special grease.
Standard versions available
- Version T2: with fixing holes, with pulling latch, with latch bracket.
- Version T: with fixing holes, without pulling latch, with latch bracket.
- Version T2S: for welding, with pulling latch, with latch bracket.
- Version TS: for welding, without pulling latch, with latch bracket.
Accessories on request
Latch clamps with safety pawl.
Features and applications
The heavy duty latch clamps GN 852 are used for very high holding forces as may be encountered in the field of plastic high
pressure mould forming.
The stroke of the pulling latch can be adjusted within its range.
Besides the standard dimensions of the pulling latch above, more versions are available under GN 951.2.

E+G Latch clamp GN 852 St. steel

Elesa+Ganter Latch clamps GN 852-NI

AISI 304 stainless steel.
Body and latch bracket

Standard versions available
Version T2: with fixing holes, with pulling latch, with latch bracket.
Version T: with fixing holes, without pulling latch, with latch bracket.
Version T2S: for welding, with pulling latch, with latch bracket.
Version TS: for welding, without pulling latch, with latch bracket.

E+G Latch clamp GN 852.3

E+G GN852.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities. When closing the spanner, a safety hook positively locks onto the body. This prevents the inadvertent or vibration-included release from the clamping position. To open the safety hook it is unlocked per one-hand operation

E+G Horizontal GN 853/GN 853-NI

Elesa+Ganter GN 853 Latch clamps

Parts in sheet metal
Case-hardened steel C10, blackened.
Tie-rod
Steel St 32, blackened.
Assembly
All moving parts lubricated with special grease.
Handle
Oil-resistant, solid plastic, red colour.
Standard executions available
- Version T5: without tie-rod, without latch bracket.
- Version TG: with tie-rod, with latch bracket, tie-rod with drawbar eye.
- Version TT: with tie-rod, with latch bracket, tie-rod with T-piece.
- Version TU: with tie-rod, with latch bracket, tie-rod with hook.
Features and applications
he latch clamp GN 853 also features a locking mechanism which prevents the inadvertent or vibration-induced opening of the
clamp.
Another benefit is the option of operating the clamp with one hand.

Elesa+Ganter GN 853-NI Latch clamps

Body and latch bracket
AISI 304 stainless steel.
Tie-rod
AISI 304 stainless steel.
Assembly
All moving parts lubricated with special grease.
Handle
Solid moulded plastic handle sleeve, red, oil resistant.
Standard versions available
- Version T5: without tie-rod, without latch bracket.
- Version TG: with tie-rod, with latch bracket, tie-rod with drawbar eye.
- Version TT: with tie-rod, with latch bracket, tie-rod with T-piece.
- Version TU: with tie-rod, with latch bracket, tie-rod with hook.
Features and applications
The Latch clamp GN 853-NI also features a locking mechanism which prevents the inadvertent or vibration-induced opening of
the clamp.
Another benefit is the option of operating the clamp with one hand.

E+G Latch clamp GN 854

Elesa+Ganter GN 854 Latch clamps.

Clamping and bearing arm
Forked, weldable and blank steel.
Type T2S: for welding.
Pulling latch
Blank steel St. 37.
Bearing pins
Blank steel St. 37.
Latch bracket
Sheet metal steel, blank.
Standard versions available
- Version 1: with bore
- Version 2: with clamping arm.
Features and applications
The outstanding feature of GN 854 latch clamps is their highly robust, sturdy and compact design, allowing their use under
demanding conditions, e.g. exposure to high temperatures, dust, spray mist, etc.
The specially designed latch bracket allows the forced loosening of the clamping by the clamping arm moving the pulling latch
forward, e.g. for separating mould halves.
Latch clamps with bore (version 1) are operated with a gear lever handle which is plugged into the latch and pulled off after
operation. This saves space and has the added advantage that the gear lever handle is not exposed to adverse ambient
conditions, e.g. turning too hot to operate. The gear lever handle is not included in the delivery.
The latch bracket can also be attached using screws or bolts.
If required, clamping elements and pulling latches are also available as separate parts; for replacement, the bearing bolt is
easily dismantled.

E+G Hook clamp GN 8330

 

E+G Hook clamp GN 8330-NI st. steel

 

E+G Collar clamp GN 809

Elesa+Ganter GN 809 Holders for clamping bolts

Holders GN 809 for clamping bolts have been developed for various toggle clamps in the design version "solid clamping arm".
The holder can be moved along the clamping arm and be adjusted in height. Once the desired position is reached, fix the
mounting in place with the clamping screw.
The thread d2 serves to hold the wide variety of clamping bolts, spring elements and similar devices.

 

E+G Pneumatic clamp GN 860

Elesa+Ganter GN 860 Pneumatically operated clamps

Metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Execution EP3: with solid clamping arm.
- Execution AP3: with forked clamping arm.
Both executions are available also with magnetic piston (EP3-M or AP3-M).
Bearing pins
Hardened and tempered steel.
Bearing bushes
Case-hardened steel.
Bearing pins for cylinders
Case-hardened steel.
Double acting cylinders
Maximum operating pressure 6 bar.
Features and applications
All the moving parts are lubricated with special grease. The clamping principles of GN 860 pneumatically operated clamps is
identical in contruction and dimension to the GN 810 manually operated vertical clamps. To ensure an extended life to the
mechanical parts as well as their air cylinders, the operating pressure should not exceed 6 bar. In addition a lubro control unit
should be fitted in the air line.
GN 860 execution M (with magnetic piston) together with proximity switches GN 896.1 and GN 896.2 can be sensed and the
generated signal leads to an electrical impulse. For further details see GN 896.1 and GN 896.2.

E+G Pneumatic clamp GN 861

Elesa+Ganter GN 861 Pneumatically operated clamps - Heavy duty type

Body
Black laquered die-cast steel.
Version EP-M: with solid clamping arm and magnetic piston.
Metal parts
Zinc-plated weldable steel, blue passivated.
Bearing pins
Case-hardened steel.
Double acting cylinder
With adjustable cushioning, maximum operating pressure 6 bar.
Features and applications
All the moving parts are lubricated with special grease. GN 861 pneumatically operated clamps have been designed to make
them easily disassembled. The bearing pins are axially fixed with circlips. This allows the clamping arm to be modified in order
to suit any particular application. To ensure an extended life to the mechanical parts as well as their air cylinders, the operating
pressure should not exceed 6 bar. In addition a lubro control unit should be fitted in the air line.
GN 861 execution M (with magnetic piston) together with proximity switch GN 896.3 can be sensed and the generated signal
leads to an electrical impulse. For further details see GN 896.3.

E+G Pneumatic clamp GN 862

Elesa+Ganter GN 862 Pneumatically operated clamps with heavy mounting bracket.

Metal parts
Zinc-plated case-hardened steel C10, blue passivated.
- Version EPV3: with solid clamping arm.
- Version APV3: with forked clamping arm.
Both versions are available with magnetic piston (EPV3-M or APV3-M).
Bearing pins
Hardened and tempered steel.
Bearing bushes
Case-hardened steel.
Bearing pins for cylinder
Case-hardened steel.
Double acting cylinder
With adjustable cushioning, maximum operating pressure 6 bar.
Features and applications
A special feature of the pneumatically operated clamps GN 862 is that they can be mounted in two different planes.
Pneumatically operated clamps GN 862 are also available as version M (magnetic piston). In conjunction with proximity switch
GN 896.2 the piston is sensed and the generated electrical signal can be used in sequence control systems.
To ensure an extended life of the mechanical parts as well as air cylinder the operating pressure should not exceed 6 bar. In
addition a lubro control unit should be fitted in the air line.
Two stepped side washers / clamping bolt retainers are included.

E+G Pneumatic clamp GN 862.1

Elesa+Ganter GN 862.1 Pneumatically operated clamps
Metal parts: Zinc-plated case-hardened steel C10, blue passivated.
Bearing pins: Hardened and tempered steel.
Bearing bushes: Case-hardened steel.
Bearing pins for cylinder: Case-hardened steel.
Double acting cylinder With adjustable cushioning, maximum operating pressure 6 bar.

E+G Pneumatic clamp GN 863

Elesa+Ganter GN 863 Pneumatically operated clamps - Heavy duty type

Body
Black laquered die-cast steel.
Metal parts
Zinc-plated weldable steel, blue passivated.
Bearing pins
Case-hardened steel.
Double acting cylinder
With adjustable cushioning, maximum operating pressure 6 bar.
Features and applications
All the moving parts are lubricated with special grease. GN 863 pneumatically operated clamps have been designed to make
them easily disassembled. The bearing pins are axially fixed with circlips. This allows the clamping arm to be modified once it
is dismounted in order to suit any particular application. To ensure an extended life to the mechanical parts as well as their air
cylinders, the operating pressure should not exceed 6 bar. In addition a lubro control unit should be fitted in the air line. GN
863 (with magnetic piston) together with proximity switch GN 896.3 can be sensed and the generated signal leads to an
electrical impulse. For further details see GN 896.3.

E+G Pneumatic clamp GN 890

Elesa+Ganter GN 890 Pneumatically operated plunger clamps for push-pull applications

Body
- Version SP3: black-oxide forged steel.
- Version SP3-M: black-oxide forged steel with magnetic piston.
Metal parts
Zinc-plated case-hardened steel C10, blue passivated.
Plunger
Zinc-plated steel, blue passivated.
Bearing bush
Case-hardened steel.
Double acting cylinder
Maximum operating pressure 6 bar.
Features and applications
GN 890 version M (with magnetic piston) together with proximity switches GN 896.1 and GN 896.2 can be sensed and the
generated impulse can be used in sequence control systems. For further details see GN 896.1 and GN 896.2.
The working principle of the pneumatically operated plunger clamp GN 890 is identical in construction and dimensions to the
manual plunger clamp GN 842.
To ensure an extended life of the mechanical parts as well as air cylinder the operating pressure should not exceed 6 bar. In
addition a lubro control unit should be fitted in the air line.
The sturdy mounting frame for the cylinder has been designed to avoid the trunions of the cylinder to protrude over the frame.

E+G Accessories GN 898-899

Elesa+Ganter Accessories GN 898-899

 

E+G Clamping bolt GN 807

Elesa+Ganter GN 807 Clamping bolts

Material
DIN 933 zinc-plated steel hexagon bolt, class 8.8 (tensile strength 800 N/mm2), blue passivated.
- Version A: without protective cap.
- Version B: with DIN 806 protective cap (only for d1 < = M12).
Hexagon nuts
Zinc-plated steel, blue passivated.

Elesa+Ganter GN 807-NI Clamping bolts

Material
AISI 304 stainless steel.
- Version A: without protective cap.
- Version B: with DIN 806 protective cap.
Hexagon nuts
AISI 304 stainless steel.

E+G Clamping bolt GN 708.1

Elesa+Ganter GN 708.1 Clamping bolts

Material
Zinc-plated steel ST, blue passivated.
Pressure pad
Shore 85 A ≈ black Neoprene, bonded to the stud.
Hexagon nuts
Zinc-plated steel, blue passivated.
Standard versions available
- Type A: straight pressure pad.
- Type B: round pressure pad.

Elesa+Ganter GN 708.1-NI Clamping bolts

Material
AISI 304 stainless steel NI.
Pressure pad
Shore 85 A ≈ black Neoprene, bonded to the stud.
Hexagon nuts
AISI 304 stainless steel.
Standard versions available
- Type A: straight pressure pad.
- Type B: round pressure pad.

E+G Pulling latch GN 951.1

Elesa+Ganter GN 951.1 Pulling latch to Clamps type GN GN 851 / GN 851.1 / GN 851.2 / GN 851.3

Available in steel (ST) and stainless steel (NI).

E+G Pulling latch GN 951.2

Elesa + Ganter GN 951.2 Pulling latch to Clamps type GN 851.2.
Available in steel and stainless steel.

E+G Clamping bolt GN 802

Elesa+Ganter GN 802 Clamping bolts

Body
DIN 6332 black-oxide steel grub screw with hexagon socket head.
Thrust pad
DIN 6311 turned and hardened black-oxide steel with retaining ring.
Hexagon nuts
Zinc-plated steel, blue passivated.
Applications
By means of the retaining ring in the clamping pad a simple and toggle link between bolt and clamping pad is created.
The clamping pad is removable thus allowing a direct clamping with the hardened bolt end.

E+G Clamping bolt GN 903

Elesa+Ganter GN 903 Clamping bolts

Clamping pad
Acetal based (POM) technopolymer, black colour, matte finish, temperature resistant up to 80°C.
Grub screw
Black-oxide steel ST (tensile strength 500 N/mm2).
Hexagon nuts
Zinc-plated steel, blue passivated.
Features and applications
The ball end of the grub screw can be hit easily into the clamping pad and removed.

Elesa+Ganter GN 903-NI Clamping bolts

Clamping pad
Acetal based (POM) technopolymer, black colour, matte finish, temperature resistant up to 80°C.
Grub screw
AISI 303 stainless steel NI.
Hexagon nuts
AISI 303 stainless steel.
Features and applications
The ball end of the grub screw can be hit easily into the clamping pad and removed.

E+G Clamping bolt GN 804

Elesa+Ganter GN 804 Clamping bolts with adjustable sping-loaded clamping pad

Bolt
Zinc-plated steel, class 5.8 (tensile stength 500 N/mm2), blue passivated.
Clamping pad
Black-oxide nitrided steel.
Hexagon nuts
Zinc-plated steel, blue passivated.
Features and applications
In order to pass the dead centre point and/or compensate for work piece tolerances when using hand operated toggle clamps,
an elastic clamping pad such as GN 708.1 can be used. GN 804 clamping bolts fitted with Belleville spring washers not only help
to overcome work piece tolerances but they also allow presetting of the required clamping force.

E+G Proximity Switch GN 896.1/2/3

Elesa+Ganter GN 896.1/GN896.2/GN 896.3 switch with mounting brackets

Technical data
Information IEC 529 DIN VDE 0470-1
Electric PVC cable, 2 wires, length 2.5 meters.
If it is used on DC brown wire must be connected to + for the diode to work.
Features and applications
this the clamp must be fitted with a special cylinder with magnetic piston which will create the electric contacts in the REED
switch to close.
The pneumatically operated clamps listed in the table below are all available with this type of cylinder (type M).
The proximity switches with mounting brackets can be set anywhere along the full stroke length of the cylinder.

E+G Power clamp GN 864

Elesa+Ganter GN 864 Power Clamps

Material
Black-oxide steel C45.
Max. air pressure
10 bar.
Accessories on request to be ordered separately
Guide bushes GN 870 and proximity switches GN 893.1 - GN 893.3 (to indicate end position).

E+G cover GN 864.1

E+G GN 864.1 protective covers for GN 864 power clamp.

Protective covers GN 864.1 are designed for power clamps GN 864 and protect the tensioning mechanism from penetrating dirt by covering the back side of the power clamp. The type FG is equipped with an anti-stick coating of fluoropolymer (PTFE) for protection against welding spray and corrosion. Socket cap screws and centering guide bushings are included.

Material:
Aluminum
- Black anodized ES
- Anti-stick coating, fluoropolymer (PTFE), green FG
Socket cap screws DIN 912, Centering guide bushings, Steel, blackened

E+G Power clamp GN 865

Elesa+Ganter GN 865 Power Clamps

Material
Black-oxide steel C45.
Max. air pressure
10 bar.
Accessories on request to be ordered separately
Guide bushes GN 870 and proximity switches GN 893.1 - GN 893.3 (to indicate end position).

E+G Power clamp GN 866

Elesa+Ganter GN 866 Power clamps

Material
Black-oxide steel C45.
Max. air pressure
10 bar.
Accessories on request to be ordered separately
Guide bushes GN 870 and proximity switches GN 893.1 - GN 893.2 (to indicate end position).

E+G holder clamp bolt GN867

 Elesa+Ganter GN 867 Holders for clamping bolts

Material
Black-oxide steel C45.
Parts included in the supply
Hexagon socket head cap screws DIN 912 and guide bushes GN 870.
Clamping bolts
- Version E: for one clamping bolt.
- Version Z: for two clamping bolts.

E+G holder clamp bolt GN 867.1

Elesa+Ganter GN 867.1 Static holders

Material
Black-oxide steel C45.
Parts included in the supply
Hexagon socket head cap screws DIN 912 and guide bushes GN 870.
Clamping bolts
- Type E: for one clamping bolt.
- Type Z: for two clamping bolts.

E+G holder clamp bolt GN 868

Elesa+Ganter GN 868 Holders for clamping jaws

Material
Black-oxide steel C45.
Parts included in the supply
Hexagon socket head cap screws DIN 912 and guide bushes GN 870.
Clamping jaws
- Version R: clamping jaws at right angle to clamping arm.
- Version P: clamping jaws parallel to clamping arm.
Features and applications
The clamping jaw holders GN 868 are suitable for the clamping arms of the power clamps GN 864 / GN 865 and GN 866.
Clamping jaw holders are equally precisely positioned on the clamping arm as are the clamping jaws GN 872 on the holders
themselves.

E+G holder clamp bolt GN 868.1

Elesa+Ganter Bracket for clamping jaws GN 868.1 Material: Black-oxide steel C45. Parts included in the supply: Hexagon socket head cap screws DIN 912 and guide bushes GN 870. Clamping jaws: - Version R: clamping jaws at right angle to clamping arm. - Version P: clamping jaws parallel to clamping arm.

E+G Static bracket GN 869.1

Elesa+Ganter Static holders GN 869.1 Material: Black-oxide steel C45. Parts included in the supply: Hexagon socket head cap screws DIN 912 and guide bushes GN 870. Clamping bolts: - Version E: for one clamping bolt. - Version Z: for two clamping bolts

E+G clamping jaws GN 869.2

Elesa+Ganter Holders for clamping jaws GN 869.2 Material: Black-oxide steel C45. Parts included in the supply: Hexagon socket head cap screws DIN 912 and guide bushes GN 870. Clamping jaws: - Type R: clamping jaws at right angle to clamping arm. - Type P: clamping jaws parallel to clamping arm.

E+G Clamping jaws blank GN 872

Elesa+Ganter Clamping jaws blank GN 872 Material: Black-oxide steel C45. Accessories: Guide bushes GN 870 to be ordered separately

E+G Levelling shims GN 871

Elesa+Ganter Levelling shims GN 871 Material: Black-oxide steel.

E+G Collar clamp GN 873

Elesa+Ganter Collar clamps GN 873 Material: Black-oxide steel C45. Parts included in the supply Guide bushes GN 870.

E+G Guide bushes GN 870

Elesa+Ganter Guide bushes GN 870 Material: Black-oxide steel.

E+G switches GN 893.1/2/3

Elesa+Ganter Proximity switches GN 893 1/2/3 Parts included in the supply: One levelling shim in plastic and two M4 Stainless Steel cap screws. Technical data LED-Indication: - green: operating voltage. - red: switch position, closed. - yellow: switch position, open. Accessories: Cables with connector coupling 4-pin, 5 and/or 10 meter long: GN 330-M12x14-G-5 and GN 330-M12x1-4-G-10.

E+G Handle GN 910.5

Elesa+Ganter Handle for Knee lever GN 910.5
Specification: Plastic.

E+G Arm lever GN 910.6

Elesa+Ganter GN 910.6 Arm lever for Knee lever
Material: Steel.

E+G Clamping arm GN 910.7

Elesa+Ganter GN 910.7 Clamping arm lever for Knee lever 
Material: Steel.

E+G Bushing GN 910.8

Elesa+Ganter GN 910.8 Bushing for Knee lever
Material: Steel.

E+G Base plate GN 910.9

Elesa+Ganter GN 910.9 Base plate for Knee lever
Material: Steel.
Accessories for knee lever modules GN 910.2 and GN 910.3.

E+G Clamping bolt GN 801

Elesa+Ganter GN 801 Clamping bolts
Specification: Zinc-plated steel, blue passivated.

E+G GN 807-NI Clamping bolt

Elesa+Ganter GN 807-NI Clamping bolt with two hexagonal nuts.

Material bolt and hexagon nut: AISI 304 stainless steel.
- Version A: without protective cap.
- Version B: with DIN 806 protective cap.

E+G GN 852.1 Latch clamp

Elesa+Ganter GN 852.1 Latch clamp

Type
- Type T with fixing holes, without pulling latch, with latch bracket
- Type T3 with fixing holes, with pulling latch, with latch bracket
- Type TS for welding, without pulling latch, with latch bracket
- Type T3S for welding, with pulling latch, with latch bracket

Material:
Body / operating handle Steel C22, forged, blackened
Latch bracket blackened
Pulling latch / bearing pins Steel St. 37, zinc plated, blue passivated
All moving parts are lubricated with special grease

E+G GN 850.1 Toggle clamp

Elesa+Ganter GN 850.1 steel toggle clamps.

GN 850.1 toggle clamps are especially suited for rapid closing and fastening of lids, flaps and molds.
During clamping, the pivoting movement of the clamping lever is transformed into an axial movement of the tension axis / tension hook and ensures form-fitting retention.
Toggle clamps of type T are equipped with a tension axis firmly attached to the clamping arm.
Type TF can be used for specific applications by attaching individual latch bolts.
Latch bolts for latch-type toggle clamps of Types TG, TT and TU can be adjusted along the adjustment dimension w2.

Types:
Type T: with draw axle, with catch
Type TF: without draw axle, without catch
Type TG: with draw axle, with catch, with oval head latch bolt
Type TT: with draw axle, with catch, with T-head latch bolt
Type TU: with draw axle, with catch, with J-hook latch bolt

Material:
- Standard: Case-hardened steel C10, Zinc plated, blue passivated
- Version NI: Stainless Steel, 1.4301

Draw hook:
- Steel St 37, zinc plated, blue passivated

Hand grip:
- High quality, oil resistant red plastic

All moving parts are lubricated with special grease

E+G GN 850.2 Toggle clamp

Elesa+Ganter GN 850.2 toggle clamp in steel.

GN 850.2 toggle clamps have a safety function whereby, a spring loaded safety hook latch ensures a secure locking connection during closing. During clamping, the pivoting movement of the clamping lever is transformed into an axial movement of the tension axis / tension hook and ensures form-fitting retention.

Toggle clamps of type T are equipped with a tension axis firmly attached to the clamping arm. Type TF can be used for specific applications by attaching individual latch bolts. Latch bolts for latch-type toggle clamps of Types TG, TT and TU can be adjusted along the adjustment dimension w2.

Types:
- Type T: with draw axle, with catch
- Type TF: without draw axle, without catch
- Type TG: with draw axle, with catch, with oval head latch bolt
- Type TT: with draw axle, with catch, with T-head latch bolt
- Type TU: with draw axle, with catch, with J-hook latch bolt

Material:
- Case-hardened steel C10
- Stainless Steel
- Zinc plated, blue passivated

Draw hook:
- Steel St 37
- Zinc plated, blue passivated

Stainless Steel NI:
- AISI 304

All moving parts:
- Lubricated with special grease

Hand grip:
- High quality, oil resistant red plastic

E+G GN 761 Toggle clamp

Elesa+Ganter GN 761 toggle clamp.

Toggle latches GN 761 are especially suited for rapid closing and fastening of covers, container lids and boxes. When the lever is closed, the eccentric configuration of the rod shaft causes the latch bolt to move towards the catch.
At the end of the lever movement, the rod shaft has exceeded the eccentric dead center point, thereby automatically keeping the toggle latch closed. The latch bolts of the toggle latches can be adjusted within the adjustable range w2.
The catch is included.

Material:
- ST: Steel, zinc plated, blue passivated
- NI: Stainless Steel AISI 304

E+G GN 761.1 Toggle clamp

Elesa+Ganter GN 761.1 toggle clamp in steel or stainless steel

Toggle latches GN 761.1 are especially suited for rapid closing and fastening of covers, container lids and boxes. When the lever is closed, the eccentric configuration of the rod shaft causes the latch bolt to move towards the catch. At the end of the lever movement, the rod shaft has exceeded the eccentric dead center point, thereby automatically keeping the toggle latch closed. For toggle latches GN 761.1 with lock mechanism, when the lever is closed, a safety hook clicks firmly into the base body. This prevents inadvertent or vibration-induced release from the clamping position. To open the latch, the safety hook can be unlocked with a single hand. The latch bolts of the toggle latches can be adjusted within the adjustable range w2 (see datasheet). The catch is included.

Material:
- ST: Steel, zinc plated, blue passivated
- NI: Stainless Steel AISI 304

E+G GN 875 Swing clamps

Elesa+Ganter GN 875 swing clamps.

Swing clamps GN 875 are used when the clamping point for inserting and removing the workpiece must be freely accessible on top. During the clamping action, the arm is first swiveled by 90° and lowered, followed by the linear tensioning motion. The workpiece clamping must take place within the clamping stroke. The angle orientation of the tensioning arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting. The swing clamps are equipped with a magnet ring piston and are therefore pre-fitted for end stop detection via sensor.

Coding:
- Type L: swiveling left
- Type R: swiveling right

Types:
- Type A: Clamping arm with slotted hole and 2 flanged washers
- Type AC: Clamping arm with slotted hole, 2 flanged washers and GN 708.1 spindle assembly
- Type B: Clamping arm with threaded hole
- Type F: Adapter flange
- Type N: without clamping arm

Material:
- Body in aluminum, hard anodized with wear-resistant surface
- Double-action air cylinder, max. pressure 6 bar
- Socket cap screw DIN 912, Steel, zinc plated, blue passivated
- Washer ISO 7092, Steel, zinc plated, blue passivated
- Spindle assembly GN 708.1 type A, Steel, zinc plated, Rubber tip 85 Shore A

E+G GN 876 Swing clamps

Elesa+Ganter GN 876 swing clamps.

Swing clamps GN 876 are used when the clamping point for inserting and removing the workpiece must be freely accessible on top. The design allows especially space-saving mounting. The height of the swing clamp can be adjusted via the screw-in thread. During the clamping action, the arm is first swiveled by 90° and lowered, followed by the linear tensioning motion. The workpiece clamping must take place within the clamping stroke. The angle orientation of the clamping arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting.

Coding:
- Type L: swiveling left
- Type R: swiveling right

Types:
- Type A: Clamping arm with slotted hole and 2 flanged washers
- Type AC: Clamping arm with slotted hole, 2 flanged washers and GN 708.1 spindle assembly
- Type B: Clamping arm with threaded hole
- Type F: Adapter flange
- Type N: without clamping arm

Material:
Aluminum, hard anodized, wear-resistant surface

Double-action air cylinder, max. pressure 6 bar

Socket cap screw DIN 912, steel, zinc plated, blue passivated

Washer ISO 7092, steel, zinc plated, blue passivated

Spindle assembly GN 708.1 type A, steel, zinc plated, rubber tip 85 Shore A

E+G GN 801.2 Clamping arm extender

Elesa+Ganter GN 801.2 clamping arm extender for toggle clamps with forked clamping arm*.

Clamping arm extenders GN 801.2 are used together with toggle clamps with “forked clamping arm” to clamp something simultaneously at two points in parallel, such as with clamping screws. These are mounted to the clamping arm and affixed in the desired position along the slot. The side position of the clamping screws is adjusted via joints that enable any positioning of the spindle assemblies. A symmetrical arrangement/setting encourages a balanced clamping result. All parts are supplied in a non-assembled set. Four flanged washers are included for fastening the clamping screw.

*) For use with GN 810 - GN 810.1 - GN 810.3 - GN 810.4 - GN 820 - GN 820.1 - GN 820.2 - GN 820.3 - GN 820.4 - GN 860.

Material:
- Version ST: Steel, zinc plated, blue passivated

E+G Vertical clamp GN 810

E+G Vertical clamp GN 810

(12)

E+G Vertical clamp GN 810-NI st. steel

E+G Vertical clamp GN 810-NI st. steel

(6)

E+G Vertical clamp GN 810.1-NI st. steel

E+G Vertical clamp GN 810.1-NI st. steel

(4)

E+G Vertical clamp GN 812

E+G Vertical clamp GN 812

(4)

E+G Vertical clamp GN 813 heavy duty

E+G Vertical clamp GN 813 heavy duty

(3)

E+G Horisontal clamp GN 820

E+G Horisontal clamp GN 820

(11)

E+G Horisontal clamp GN 820-NI

E+G Horisontal clamp GN 820-NI

(7)

E+G Plunger clamp GN 840

E+G Plunger clamp GN 840

(2)

E+G Plunger clamp GN 841

E+G Plunger clamp GN 841

(2)

E+G Plunger clamp GN 842

E+G Plunger clamp GN 842

(7)

E+G Plunger clamp GN 843.1/843.1-NI

E+G Plunger clamp GN 843.1/843.1-NI

(12)

E+G Plunger clamp GN 844

E+G Plunger clamp GN 844

(4)

E+G Hook clamp GN 850

E+G Hook clamp GN 850

(6)

E+G Latch clamp GN 851

E+G Latch clamp GN 851

(6)

E+G Latch clamp GN 851-NI st. steel

E+G Latch clamp GN 851-NI st. steel

(6)

E+G Latch clamp GN 851.1

E+G Latch clamp GN 851.1

(6)

E+G Latch clamp GN 851.1-NI st. steel

E+G Latch clamp GN 851.1-NI st. steel

(6)

E+G Latch clamp GN 851.2

E+G Latch clamp GN 851.2

(6)

E+G Latch Clamp GN 851.3

E+G Latch Clamp GN 851.3

(12)

E+G clamp GN 910

E+G clamp GN 910

(6)

E+G clamp GN 910.1

E+G clamp GN 910.1

(5)

E+G Knee lever with foot GN 910.2

E+G Knee lever with foot GN 910.2

(4)

E+G Knee lever no foot GN 910.3

E+G Knee lever no foot GN 910.3

(2)

E+G Vertical clamp GN 812.1

E+G Vertical clamp GN 812.1

(12)

E+G Horizontal clamp GN 820.2

E+G Horizontal clamp GN 820.2

(4)

E+G Toggle clamp GN 820.3/820.3-NI

E+G Toggle clamp GN 820.3/820.3-NI

(0)

E+G Toggle clamp GN 820.4/820.4-NI

E+G Toggle clamp GN 820.4/820.4-NI

(0)

E+G Horisontal clamp GN 820.1-NI

E+G Horisontal clamp GN 820.1-NI

(6)

E+G Latch clamp GN 858

E+G Latch clamp GN 858

(1)

E+G Hook clamp GN 821

E+G Hook clamp GN 821

(16)

E+G Hook clamp GN 831

E+G Hook clamp GN 831

(12)

E+G Hook clamp TLA.Z, TLA.S

E+G Hook clamp TLA.Z, TLA.S

(2)

E+G Hook clamp TLD.Z, TLD.S

E+G Hook clamp TLD.Z, TLD.S

(2)

E+G Hook clamp TLC.Z, TLC.S

E+G Hook clamp TLC.Z, TLC.S

(2)

E+G Hook clamp TLE.Z, TLE.S

E+G Hook clamp TLE.Z, TLE.S

(2)

E+G Hook clamp TLF.Z, TLF.S

E+G Hook clamp TLF.Z, TLF.S

(2)

E+G Hook clamp TLG.Z, TLG.S

E+G Hook clamp TLG.Z, TLG.S

(2)

E+G Hook clamp TLI.Z, TLI.S

E+G Hook clamp TLI.Z, TLI.S

(2)

E+G Hook Clamp TLV.Z, TLV.S

E+G Hook Clamp TLV.Z, TLV.S

(2)

E+G Hook clamps TLL

E+G Hook clamps TLL

(0)

E+G Hook clamps TLM

E+G Hook clamps TLM

(0)

E+G Hook clamps TLN

E+G Hook clamps TLN

(0)

E+G Hook clamps TLP

E+G Hook clamps TLP

(0)

E+G C-Clamp GN 855

E+G C-Clamp GN 855

(2)

E+G Latch clamp GN 852

E+G Latch clamp GN 852

(6)

E+G Latch clamp GN 852 St. steel

E+G Latch clamp GN 852 St. steel

(8)

E+G Latch clamp GN 852.3

E+G Latch clamp GN 852.3

(0)

E+G Horizontal GN 853/GN 853-NI

E+G Horizontal GN 853/GN 853-NI

(24)

E+G Latch clamp GN 854

E+G Latch clamp GN 854

(2)

E+G Hook clamp GN 8330

E+G Hook clamp GN 8330

(0)

E+G Hook clamp GN 8330-NI st. steel

E+G Hook clamp GN 8330-NI st. steel

(0)

E+G Collar clamp GN 809

E+G Collar clamp GN 809

(5)

E+G Pneumatic clamp GN 860

E+G Pneumatic clamp GN 860

(16)

E+G Pneumatic clamp GN 861

E+G Pneumatic clamp GN 861

(2)

E+G Pneumatic clamp GN 862

E+G Pneumatic clamp GN 862

(8)

E+G Pneumatic clamp GN 862.1

E+G Pneumatic clamp GN 862.1

(8)

E+G Pneumatic clamp GN 863

E+G Pneumatic clamp GN 863

(2)

E+G Pneumatic clamp GN 890

E+G Pneumatic clamp GN 890

(7)

E+G Accessories GN 898-899

E+G Accessories GN 898-899

(11)

E+G Clamping bolt GN 807

E+G Clamping bolt GN 807

(27)

E+G Clamping bolt GN 708.1

E+G Clamping bolt GN 708.1

(28)

E+G Pulling latch GN 951.1

E+G Pulling latch GN 951.1

(30)

E+G Pulling latch GN 951.2

E+G Pulling latch GN 951.2

(16)

E+G Clamping bolt GN 802

E+G Clamping bolt GN 802

(16)

E+G Clamping bolt GN 903

E+G Clamping bolt GN 903

(78)

E+G Clamping bolt GN 804

E+G Clamping bolt GN 804

(5)

E+G Proximity Switch  GN 896.1/2/3

E+G Proximity Switch GN 896.1/2/3

(3)

E+G Power clamp GN 864

E+G Power clamp GN 864

(7)

E+G cover GN 864.1

E+G cover GN 864.1

(0)

E+G Power clamp GN 865

E+G Power clamp GN 865

(3)

E+G Power clamp GN 866

E+G Power clamp GN 866

(2)

E+G holder clamp bolt GN867

E+G holder clamp bolt GN867

(6)

E+G holder clamp bolt GN 867.1

E+G holder clamp bolt GN 867.1

(6)

E+G holder clamp bolt GN 868

E+G holder clamp bolt GN 868

(6)

E+G holder clamp bolt GN 868.1

E+G holder clamp bolt GN 868.1

(6)

E+G Static bracket GN 869.1

E+G Static bracket GN 869.1

(6)

E+G clamping jaws GN 869.2

E+G clamping jaws GN 869.2

(6)

E+G Clamping jaws blank GN 872

E+G Clamping jaws blank GN 872

(6)

E+G Levelling shims GN 871

E+G Levelling shims GN 871

(3)

E+G Collar clamp GN 873

E+G Collar clamp GN 873

(3)

E+G Guide bushes GN 870

E+G Guide bushes GN 870

(3)

E+G switches GN 893.1/2/3

E+G switches GN 893.1/2/3

(3)

E+G Handle GN 910.5

E+G Handle GN 910.5

(2)

E+G Arm lever GN 910.6

E+G Arm lever GN 910.6

(2)

E+G Clamping arm GN 910.7

E+G Clamping arm GN 910.7

(2)

E+G Bushing GN 910.8

E+G Bushing GN 910.8

(2)

E+G Base plate GN 910.9

E+G Base plate GN 910.9

(2)

E+G Clamping bolt GN 801

E+G Clamping bolt GN 801

(5)

E+G GN 807-NI Clamping bolt

E+G GN 807-NI Clamping bolt

(0)

E+G GN 852.1 Latch clamp

E+G GN 852.1 Latch clamp

(0)

E+G GN 850.1 Toggle clamp

E+G GN 850.1 Toggle clamp

(0)

E+G GN 850.2 Toggle clamp

E+G GN 850.2 Toggle clamp

(0)

E+G GN 761 Toggle clamp

E+G GN 761 Toggle clamp

(0)

E+G GN 761.1 Toggle clamp

E+G GN 761.1 Toggle clamp

(0)

E+G GN 875 Swing clamps

E+G GN 875 Swing clamps

(0)

E+G GN 876 Swing clamps

E+G GN 876 Swing clamps

(0)

E+G GN 801.2 Clamping arm extender

E+G GN 801.2 Clamping arm extender

(0)

Close

Share site

Please fill in the form below with your details. Fields marked with must be completed

Share site

Thank you for sharing this page. Your friend will shortly receive an email.
Close

Newsletter

Subscribe

Close

Send us an email

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Call me request

Please fill in the form below with your details. Fields marked with must be completed

Submit request

Close

Log in

Please fill in the form with your username and password to log in at Brd. Klee



Have you forgotten your password?
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • Own profile with own lot number, reordering and favourites
  • 24 hours service
Close

Lost Password

Please give us your email, and we will send you instructions on how to reset your password to your mail.


Recover password
Are you a new customer?
Create account

Benifits for you as a customer at Brd. Klee

  • My profile with own lot number, reordering and favorites
  • 24 hours emergency service
Close

Create profile

Please fill in the form below with your request. Fields marked with must be completed




Close

Complete

There is now sent a request for inclusion in our customer base.

If your company is recognized for the terms you will within 24 hours receive an email with your password.

Welcome to Brd. Klee

Close