CPS Mini Cable Chain (also called e-chain) for guiding and protecting e.g. cables, hydraulic and pneumatic hoses. Is used for printing machines and packaging machines ect.
Material: CPS-Amide / Black fiberglass-reinforced thermoplastic (PA6 + G.F)
Temperature: -30 ° C to + 130 ° C
Acceleration: 15m / S ^ 2
Speed: 6 m / s
Noise level: 40 dB (according to DIN EN 61672-1)
CPS Mini Cable Chain is CE marked, ATEX approved (Ex) and complies with RoHS2.
Delivered in finished lengths of approx. one meter.
Please note that the end pieces must be ordered separately. When fitting the end piece, the chain becomes a little longer than specified.
The ST Chain is available in sizes from inside height 26 mm and outside width 35 mm up to inside height 110 mm outside width 600 mm.
The ST Chain is built of the following separate components and can be assembled and disassembled as you wish: Sides (determines the height), frames (determines the width) and radius (determines the bend). This allows you to reuse the parts.
We stock the individual components to build an open chain (N). We do not stock fully assembled units, which is why the stock figure is shown as 0. Instead, it is indicated how many we can build.
The ST chain is offered in six types, each with their own unique characteristics. Learn more about Cable Chains here.
Please note that the end pieces must be ordered separately.
End pieces for Cable Chains. For the cable chains we supply there is a wide selection of end pieces. We have a selection in our webshop, and if you do not find the right item please contact us.
Please note that a set consists of parts for both ends of a complete chain.
Benifits for you as a customer at Brd. Klee
Benifits for you as a customer at Brd. Klee
